Tchater maintenant avec le support
Tchattez avec un ingénieur du support

syslog-ng Open Source Edition 3.25 - Administration Guide

Preface Introduction to syslog-ng The concepts of syslog-ng Installing syslog-ng The syslog-ng OSE quick-start guide The syslog-ng OSE configuration file source: Read, receive, and collect log messages
How sources work default-network-drivers: Receive and parse common syslog messages internal: Collecting internal messages file: Collecting messages from text files wildcard-file: Collecting messages from multiple text files linux-audit: Collecting messages from Linux audit logs network: Collecting messages using the RFC3164 protocol (network() driver) nodejs: Receiving JSON messages from nodejs applications mbox: Converting local email messages to log messages osquery: Collect and parse osquery result logs pipe: Collecting messages from named pipes pacct: Collecting process accounting logs on Linux program: Receiving messages from external applications python: writing server-style Python sources python-fetcher: writing fetcher-style Python sources snmptrap: Read Net-SNMP traps sun-streams: Collecting messages on Sun Solaris syslog: Collecting messages using the IETF syslog protocol (syslog() driver) system: Collecting the system-specific log messages of a platform systemd-journal: Collecting messages from the systemd-journal system log storage systemd-syslog: Collecting systemd messages using a socket tcp, tcp6, udp, udp6: Collecting messages from remote hosts using the BSD syslog protocol— OBSOLETE unix-stream, unix-dgram: Collecting messages from UNIX domain sockets stdin: Collecting messages from the standard input stream
destination: Forward, send, and store log messages
amqp: Publishing messages using AMQP collectd: sending metrics to collectd elasticsearch2: Sending messages directly to Elasticsearch version 2.0 or higher (DEPRECATED) elasticsearch-http: Sending messages to Elasticsearch HTTP Bulk API file: Storing messages in plain-text files graphite: Sending metrics to Graphite Sending logs to Graylog hdfs: Storing messages on the Hadoop Distributed File System (HDFS) Posting messages over HTTP http: Posting messages over HTTP without Java kafka: Publishing messages to Apache Kafka (Java implementation) kafka: Publishing messages to Apache Kafka (C implementation, using the librdkafka client) loggly: Using Loggly logmatic: Using Logmatic.io mongodb: Storing messages in a MongoDB database network: Sending messages to a remote log server using the RFC3164 protocol (network() driver) osquery: Sending log messages to osquery's syslog table pipe: Sending messages to named pipes program: Sending messages to external applications pseudofile() python: writing custom Python destinations redis: Storing name-value pairs in Redis riemann: Monitoring your data with Riemann slack: Sending alerts and notifications to a Slack channel smtp: Generating SMTP messages (email) from logs snmp: Sending SNMP traps Splunk: Sending log messages to Splunk sql: Storing messages in an SQL database stomp: Publishing messages using STOMP syslog: Sending messages to a remote logserver using the IETF-syslog protocol syslog-ng(): Forward logs to another syslog-ng node tcp, tcp6, udp, udp6: Sending messages to a remote log server using the legacy BSD-syslog protocol (tcp(), udp() drivers) Telegram: Sending messages to Telegram unix-stream, unix-dgram: Sending messages to UNIX domain sockets usertty: Sending messages to a user terminal: usertty() destination Write your own custom destination in Java or Python Client-side failover
log: Filter and route log messages using log paths, flags, and filters Global options of syslog-ng OSE TLS-encrypted message transfer template and rewrite: Format, modify, and manipulate log messages parser: Parse and segment structured messages db-parser: Process message content with a pattern database (patterndb) Correlating log messages Enriching log messages with external data Statistics of syslog-ng Multithreading and scaling in syslog-ng OSE Troubleshooting syslog-ng Best practices and examples The syslog-ng manual pages Creative Commons Attribution Non-commercial No Derivatives (by-nc-nd) License Glossary

Modules in syslog-ng OSE

The syslog-ng OSE application is modular, to increase its flexibility and also to simplify the development of additional modules. Most of the functionality of syslog-ng OSE is in separate modules. That way it becomes also possible to finetune the resource requirements of syslog-ng OSE, for example, by loading only the modules that are actually used in the configuration, or simply omitting modules that are not used but require large amount of memory.

Each module contains one or more plugins, which add some functionality to syslog-ng OSE, for example, a destination or a source driver.

  • To display the list of available modules, execute the syslog-ng --version command.

  • To the description of the available modules, execute the syslog-ng --module-registry command.

  • To customize which modules are loaded automatically when syslog-ng OSE is started, use the --default-modules command-line option of syslog-ng OSE.

  • To request loading a module from the syslog-ng OSE configuration file, see Loading modules.

For details on the command-line parameters of syslog-ng OSE mentioned in the previous list, see the syslog-ng OSE man page at The syslog-ng manual page.

Loading modules

The syslog-ng Open Source Edition application loads every available module during startup.

To load a module that is not loaded automatically, include the following statement in the syslog-ng OSE configuration file:

@module <module-name>

Note the following points about the @module statement:

  • The @module statement is a top-level statement, that is, it cannot be nested into any other statement. Usually it is used immediately after the @version statement.

  • Every @module statement loads a single module: loading multiple modules requires a separate @module statement for every module.

  • In the configuration file, the @module statement of a module must be earlier than the module is used.

NOTE:

To disable loading every module automatically, set the autoload-compiled-modules global variable to 0 in your configuration file:

@define autoload-compiled-modules 0

Note that in this case, you have to explicitly load the modules you want to use.

Use the @requires statement to ensure that the specified module is loaded

To ensure that a module is loaded, include the following statement in the syslog-ng OSE configuration file or the external files included in the configuration file:

@requires <module-name>
NOTE:

If you include the @requires statement in the:

  • syslog-ng OSE configuration file, syslog-ng OSE attempts to load the required module. If it fails to load the module, syslog-ng OSE stops and an error message is displayed.
  • external files included in the configuration file, syslog-ng OSE attempts to load the required module. If it fails to load the module, only the external file is not processed.

Listing configuration options

Starting with syslog-ng OSE 3.25, you can use the syslog-ng-cfg-db.py utility to list the available options of configuration objects. For example, you can list all the options that can be set in the file source, and so on.

The following command lists the contexts that the utility supports. Currently sources and destinations are supported.

syslog-ng-cfg-db.py

To list the available drivers of a context, use the following command

syslog-ng-cfg-db.py -c <source|destination>

To list the available options of a specific driver, specify the context and the driver:

syslog-ng-cfg-db.py -c <source|destination> -d <driver>

For example, to list the options of the kafka-c() destination driver:

syslog-ng-cfg-db.py -c destination -d kafka-c

The output includes the available options of the driver in alphabetical order, and the type of the option. For example:

destination kafka-c(
    bootstrap-servers/kafka-bootstrap-servers(<string>)
    client-lib-dir(<string>)
    config/option()
    config/option(<string> <arrow> <string-or-number>)
    config/option(<string> <string-or-number>)
    flush-timeout-on-reload(<number>)
    flush-timeout-on-shutdown(<number>)
    frac-digits(<number>)
    key(<string>)
    local-time-zone/time-zone(<string>)
    log-fifo-size(<number>)
    message/template(<string>)
    on-error(<string>)
    persist-name(<string>)
    poll-timeout(<number>)
    properties-file(<path>)
    send-time-zone(<string>)
    sync-send(<yesno>)
    throttle(<number>)
    time-zone(<string>)
    topic(<string>)
    ts-format(<string>)
    workers(<number>)
    config/option(
        <string>(<string-or-number>)
    )
    key(
        <identifier>(<string>)
    )
    message/template(
        <identifier>(<string>)
    )
)

Note that the script caches the list of the options, so if you want to rebuild the database, you have to use the -r option.

Visualize the configuration

Starting with syslog-ng OSE 3.25, you can visualize the configuration of a running syslog-ng OSE instance using the syslog-ng-ctl --export-config-graph command. The command walks through the effective configuration, and exports it as a graph into a JSON structure.

The resulting JSON file can be converted into DOT file format that visualization tools like Graphviz can use. The package includes a Python script to convert the exported JSON into DOT format: <syslog-ng-installation-directory>/contrib/scripts/config-graph-json-to-dot.py

You can convert the DOT file into PNG or PDF format using external tools.

Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation