Tchater maintenant avec le support
Tchattez avec un ingénieur du support

One Identity Safeguard for Privileged Passwords 7.0.2 LTS - Administration Guide

Introduction System requirements and versions Using API and PowerShell tools Using the virtual appliance and web management console Cloud deployment considerations Setting up Safeguard for Privileged Passwords for the first time Using the web client Home Privileged access requests Appliance Management
Appliance Backup and Retention Certificates Cluster Enable or Disable Services External Integration Real-Time Reports Safeguard Access Appliance Management Settings
Asset Management
Account Automation Accounts Assets Partitions Discovery Profiles Tags Registered Connectors Custom platforms
Security Policy Management
Access Request Activity Account Groups Application to Application Cloud Assistant Asset Groups Entitlements Linked Accounts User Groups Security Policy Settings
User Management Reports Disaster recovery and clusters Administrator permissions Preparing systems for management Troubleshooting Frequently asked questions Appendix A: Safeguard ports Appendix B: SPP and SPS join guidance Appendix C: Regular Expressions About us

Unjoining replicas from a cluster

Safeguard for Privileged Passwordsallows the Appliance Administrator to unjoin replica appliances from a cluster. Prior to unjoining a replica from a Safeguard for Privileged Passwords cluster, review the unjoin considerations that follow.

Considerations to unjoin cluster members

  • You can only unjoin replica appliances from a cluster.

  • To promote a replica to be the new primary and then unjoin the 'old' primary appliance, you can use the Failover option if the cluster has consensus (the majority of the appliances are online and able to communicate). For more information, see Failing over to a replica by promoting it to be the new primary. If the cluster does not have consensus, use the Cluster Reset option to rebuild your cluster. For more information, see Resetting a cluster that has lost consensus.
  • To perform an unjoin operation, the replica appliance to be unjoined can be in any state; however, the remaining appliances in the cluster must achieve consensus (online and able to communicate).
  • You can unjoin a replica appliance when logged in to any appliance in the cluster that is online, using an account with Appliance Administrator permissions.

  • When you unjoin a replica appliance from a cluster, the appliance is removed from the cluster as a stand-alone appliance that retains all of the data and security policy configuration information it contained prior to being unjoined. After the replica is unjoined, the appliance is placed in a Read-only mode with the functionality identified in Read-only mode functionality. You can activate an appliance in Read-only mode so you can add, delete and modify data, apply access request workflow, and so on. For more information, see Activating a read-only appliance.

To unjoin a replica from a cluster

  1. Log in to an appliance in the cluster, as an Appliance Administrator.
  2. Go to Cluster Management:
    • web client: Navigate to Cluster > Cluster Management. 
  3. In the cluster view on the left, select the replica node to be unjoined from the cluster.
  4. In the details view on the right, click Unjoin.

  5. In the Unjoin confirmation dialog, enter the word Unjoin and click OK to proceed.

    Safeguard for Privileged Passwords displays (synchronizing icon) and (lock icon) next to the appliance it is unjoining and puts the replica appliance in Maintenance mode while it is unjoining from the cluster.

    Once the operation has completed, the replica appliance no longer appears.

Login during Maintenance mode

If you log in to the replica appliance while Safeguard for Privileged Passwords is processing an unjoin operation, you will see the Maintenance mode screen. At the end of the Maintenance mode, there will be a button indicating that the unjoin operation completed successfully:

  • web client: Continue

Maintaining and diagnosing cluster members

Maintain and diagnosis cluster members from Cluster Management:

  • web client: Navigate to Cluster > Cluster Management. 

When a node is selected in the Cluster view, the right of the pane displays details about the selected appliance. From this pane you can run the following maintenance and diagnostic tasks against the selected appliance.

To fix more serious issues with a cluster, you can perform additional operations depending on the state of the cluster members. Some such operations include:

About Offline Workflow Mode

To ensure password and SSH key consistency and individual accountability for privileged accounts, when an appliance loses consensus in the cluster, access requests are disabled. In the event of an extended network partition, the Appliance Administrator can either automatically or manually place an appliance in Offline Workflow Mode to run access request workflow on that appliance in isolation from the rest of the cluster. When the network issues are resolved and connectivity is reestablished, the Appliance Administrator can either automatically or manually resume online operations to merge audit logs, drop any in-flight access requests, and return the appliance to full participation in the cluster.

Offline workflow considerations
  • In Offline Workflow Mode, an appliance functions apart from the other members of the cluster. Users can request passwords and sessions.
  • Settings for Offline Workflow are set on an individual appliance.
  • Suspend/Restore account does not work in Offline Workflow mode.

Passwords and SSH keys in Offline Workflow Mode

  • In Offline Workflow Mode, the appliance is enabled to request, approve, and release passwords, SSH key, and sessions without a quorum, using cached policy data.

  • In Offline Workflow Mode, when policy requires change after check-in, the requirement is bypassed to allow for subsequent check out. In this case, a Access Request Password or SSH Key Reset By-passed Event is generated, stating: An access request subsequent check out is available as password [or SSH key] reset was by-passed.

  • Password and SSH key changes will be rescheduled and will possibly complete when network connectivity is restored even while the appliance is in Offline Workflow Mode.

  • Users may still request a password or SSH key from the primary or another replica on the cluster with consensus; password and SSH key check and changes works as usual. The result is that passwords or SSH keys may get out of sync on the appliance running Offline Workflow Mode. This is expected behavior and the password and SSH key will remain out of sync until the partition is healed.

  • On a network partition where one or more appliances are in Offline Workflow Mode, it is possible for two individuals to have the same password and SSH key at the same time. Tying actions back to a single responsible individual is not possible. It will still be possible to identify each person that had access to the password and SSH key at the time.

Policies in Offline Workflow Mode

  • Policy will be enforced as it existed at the time the appliance, now in Offline Workflow Mode, lost network connectivity to the rest of the cluster.

  • Policy requiring a password and SSH key change after check-in is bypassed and subsequent check-out from the appliance in Offline Workflow Mode is allowed.

  • Policy is Read-only. Therefore, update and delete configuration operations are not allowed on the appliance in Offline Workflow Mode.

  • Policy changes are only allowed if directed at an online primary within the cluster. Policy changes on the online primary do not affect the appliance in Offline Workflow Mode. Once the offline workflow appliance has resumed online operations the policy changes will be distributed.

Work flow in Offline Workflow Mode

  • Regular workflow approval rules apply.
  • Time-based constraints and emergency access apply.
  • For the few minutes the appliance is switching to or from Offline Workflow Mode, Application to Application and any command line password or SSH key-fetching operations will be suspended.

  • Platform tasks (including Suspend and Restore Accounts) are disabled in Offline Workflow Mode.

User experience: Enable Offline Workflow Mode

Users that are requesting a password and SSH key in Safeguard are returned to the Home page. Password and SSH key requests prior to the switch to Offline Workflow Mode are not displayed.

  • When the switch to Offline Workflow Mode starts, this message displays: Safeguard is switching to Offline Workflow Mode. Please wait until this process is complete before proceeding with any current work. The bottom of the Home page displays this information: (Switching to Offline Workflow Mode...) and Disconnected. If the user clicks Refresh, the banner is replaced with: The service is unavailable.
  • When the switch to Offline Workflow Mode is complete, a banner with this information is displayed: Safeguard is currently in Offline Workflow Mode. Previous access requests are temporarily unavailable. You may submit new requests to continue working in Offline Workflow Mode. The bottom of the Home page displays these messages: (Offline Workflow Mode) and the connection status: Connecting then Connected.

Administrators can view the workflow status on the Cluster View pane where a message like this displays: Offline Workflow Enabled (This appliance is running access workflow in isolation from the cluster.) For more information, see Cluster Management.

User experience: Resume Online Operations

When the switch to Resume Online Operations has begun, this message displays: Safeguard is returning to normal operations. Please wait until this process is complete before proceeding with any current work. The bottom of the Home page displays this information: (Returning to normal operations) and Disconnected.

Once online operations are restored, the bottom of the Home page displays this information: Connected.

Notifications

  • The Appliance Administrator is notified when an appliance has lost consensus (quorum) via the ApplianceStateChangedEvent.

    • A primary will change from Online to PrimaryNoQuorum.
    • A replica will change from Online to one of the following:
      • ReplicaNoQuorum (connected to primary, does not have quorum)

      • ReplicaDisconnected (disconnected from primary, does not have quorum)

      • ReplicaWithQuorum (disconnected from primary, has quorum)

      For more information, see Appliance states.

  • The following events can be configured for email notifications and are written to the audit log:

    • ClusterPrimaryQuorumLostEvent

    • ClusterPrimaryQuorumRestoredEvent

    • ClusterReplicaQuorumLostEvent

    • ClusterReplicaQuorumRestoredEvent

  • All access request notifications are still generated.

  • The Notification service identifies whether access workflow is available on an appliance via the IsPasswordRequestAvailable, IsSSHKeyRequsteAvailable, and IsSessionsRequestAvailable properties. The following API endpoint can be used to make this determination:

    https://<hostname or IP>/service/notification/v3/Status/Availability

Audit logs in Offline Workflow Mode

  • Prior to network connectivity being restored, everything that happens on the appliance running in Offline Workflow Mode is only audited on that appliance.

  • The audit logs merge when network connectivity is restored between the offline member and any other member in the cluster, even while in Offline Workflow Mode.
  • The audit data on any cluster member operating in Offline Workflow Mode will be lost unless the appliance is returned to the cluster using the resume online operations steps.
  • All cluster members that were capable of processing access and session requests must have network connectivity restored to the remainder of the cluster to ensure the cluster wide audit history is maintained.

Avoid modifications to the cluster configuration

  • It is recommended that no changes to cluster membership are made while an appliance is in Offline Workflow Mode. The online operations must be automatically or manually resumed before adding or removing other nodes to ensure the appliance can seamlessly reintegrate with the cluster.

    The Appliance Administrator is advised to resume the online operations as soon as possible for individual password or SSH key accountability, policy adherence, and audit integrity.

Cluster patching is not allowed

During a cluster patch, Offline Workflow Mode cannot be triggered manually or automatically on any of the clustered appliances.

Considerations to resume online operations

  • The network partition must be corrected before resuming online operations with full functionality.

  • You can resume online operations of an appliance in Offline Workflow Mode without a quorum. To resume online operations, it is highly recommended that network connectivity is restored between a majority of the cluster members, including the member in Offline Workflow Mode.

  • When resuming online operations, any access requests that are in flight on the appliance that is running in Offline Workflow Mode will be dropped.

  • While it is possible to resume online operations if the appliance is not connected, making access requests will no longer be available.

Automatic versus manual workflow

Manually control Offline Workflow Mode

The Appliance Administrator can manually control Offline Workflow Mode using the following steps. Manual intervention is possible when automatic Offline Workflow Mode is enabled. For more information, see Offline Workflow (automatic).

To manually enable Offline Workflow Mode

  1. Go to Cluster Management:

    • web client: Navigate to Cluster > Cluster Management. 
  2. In the cluster view (left pane) of the offline appliance, click the member of the cluster that is offline.

  3. In the appliance details and cluster health pane (right pane), review the errors and warnings to verify the appliance has lost consensus.

  4. On the offline appliance, click Enable Offline Workflow. (This option is only available when the appliance has lost consensus with the cluster.)

    A message like the following displays:

    This appliance will run access workflow in isolation from the cluster to work around loss of consensus with the cluster. Users will be able to request, approve and release passwords, SSH key, and sessions via this appliance using cached data. When connectivity is restored, you should resume online operations to reintegrate this appliance with the cluster and merge audit logs.

    Type 'Enable Offline Workflow' in the box below to confirm.

    See KB263580 for more information.

  5. In the dialog, type Enable Offline Workflow and click Enter. The appliance is in Offline Workflow Mode and enters maintenance. In the Activity Center, the Event for the appliance goes from Enable Offline Workflow Started to Enable Offline Workflow Completed.
  6. You can verify that new requests are enabled and view the following health checks on the Cluster Management window:
    • If there is communication to the other members in the cluster, while connected to the member in Offline Worflow mode, a message like this displays at the top of the messages: Cluster connectivity detected. When communication is reestablished, you can manually resume online operations to the appliance.
    • A warning icon displays next to an appliance in Offline Workflow Mode. An error icon is displayed if viewed from any other member in the cluster if the member is unable to communicate with the member in Offline Workflow Mode. At any time, you can click Check Health to update the information.
    • A warning message like the following will display: Request Workflow: Access workflow on this appliance is operating in offline isolation from the cluster. This warning will persist until online operations are resumed by an Appliance Administrator.

To manually resume online operations

Before resuming online operations, see Considerations to resume online operations.

  1. Go to Cluster Management:

    • web client: Navigate to Cluster > Cluster Management. 
  2. In the cluster view (left pane), click the member of the cluster that is offline.

  3. On the appliance in Offline Workflow Mode, click Resume Online Operations. (This operation is only available when the appliance is in Offline Workflow Mode.)

    A message like the following displays:

    The appliance will be reconfigured for online operations. The appliance will attempt to reintegrate with the cluster and merge audit logs. Refer to the to the Admin Guide for more information.

    Type 'Resume Online Operations' in the box below to confirm.

  4. In the dialog, type in Resume Online Operations and click Enter.
  5. When maintenance is complete, click Restart. The appliance is returned to Maintenance mode.
  6. You can verify health checks on the Cluster Management window. If a warning icon still displays next to the appliance, select the appliance and click Check Health to rerun the cluster health check and display the most up-to-date health information.
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation