Tchater maintenant avec le support
Tchattez avec un ingénieur du support

One Identity Safeguard for Privileged Passwords 7.0.2 LTS - Release Notes

Supported platforms

Safeguard for Privileged Passwords supports a variety of platforms, including custom platforms.

Safeguard for Privileged Passwords tested platforms

The following table lists the platforms and versions that have been tested for Safeguard for Privileged Passwords (SPP). Additional assets may be added to Safeguard for Privileged Passwords. If you do not see a particular platform listed when adding an asset, use the Other, Other Managed, Other Directory, or Linux selection on the Management tab of the Asset dialog.

SPP linked to SPS: Sessions platforms

CAUTION: When linking your One Identity Safeguard for Privileged Sessions (SPS) deployment to your One Identity Safeguard for Privileged Passwords (SPP) deployment, ensure that the SPS and SPP versions match exactly, and keep the versions synchronized during an upgrade. For example, you can only link SPS version 6.6 to SPP version 6.6, and if you upgrade SPS to version 6.7, you must also upgrade SPP to 6.7.

Make sure that you do not mix Long Term Supported (LTS) and feature releases. For example, do not link an SPS version 6.0.1 to an SPP version 6.1.

When Safeguard for Privileged Passwords (SPP) is linked with a Safeguard for Privileged Sessions (SPS) appliance, platforms are supported that use one of these protocols:

  • SPP 2.8 or lower: RDP, SSH
  • SPP 2.9 or higher: RDP, SSH, or Telnet

Some platforms may support more than one protocol. For example, a Linux (or Linux variation) platform supports both SSH and Telnet protocols.

Table 4: Supported platforms: Assets that can be managed
Platform Name Tested Versions

Supports SPP

Supports SPS Access

ACF2 - Mainframe

ACF2 - Mainframe LDAP r14 zSeries

ACF2 - Mainframe LDAP r15 zSeries

True

True

ACF2 - Mainframe LDAP

ACF2 - Mainframe LDAP r14 zSeries

ACF2 - Mainframe LDAP r15 zSeries

True

False

Active Directory

Active Directory

True

False

AIX

AIX 7.1

AIX 7.2

AIX 7.3

True

True

Amazon Linux

Amazon Linux 2

Amazon Linux 2022

Amazon Linux Other

True

True

Amazon Web Services

Amazon Web Services 1

True

False

CentOS Linux

CentOS Linux 7

CentOS Linux 8

True

True

Check Point GAiA (SSH)

Check Point GAiA (SSH) R76

Check Point GAiA (SSH) R77

Check Point GAiA (SSH) R80.30

True

True

Cisco ASA

Cisco ASA 7.X

Cisco ASA 8.X

Cisco ASA 9.X

True

True

Cisco IOS (510)

Cisco IOS 12.X

Cisco IOS 15.X

Cisco IOS 16.X

True

True

Cisco ISE

Cisco ISE 2.7

Cisco ISE 3

True

False

Cisco ISE CLI

Cisco ISE CLI 2.7

Cisco ISE CLI 3

True

True

Cisco NX-OS

Cisco NX-OS 9.3(7)

Cisco NX-OS 9.3(7a)

True

True

Debian GNU/Linux

Debian GNU/Linux 9

Debian GNU/Linux 10

Debian GNU/Linux 11

True

True

Dell iDRAC

Dell iDRAC 7

Dell iDRAC 8

Dell iDRAC 9

True

True

eDirectory LDAP

eDirectory LDAP 9.0

True

False

ESXi

ESXi 7.0

ESXi 8.0

True

False

F5 Big-IP

F5 Big-IP 12.1.2

F5 Big-IP 13.0

F5 Big-IP 14.0

F5 Big-IP 15.0

True

True

Fedora

Fedora 36

Fedora 37

True

True

Fortinet FortiOS

Fortinet FortiOS 5.2

Fortinet FortiOS 5.6

Fortinet FortiOS 6.0

Fortinet FortiOS 6.2

Fortinet FortiOS 7.0

True

True

FreeBSD

FreeBSD 12

FreeBSD 13

True

True

HP iLO

HP iLO 2

HP iLO 3

HP iLO 4

HP iLO 5

True

True

HP iLO MP

HP iLO MP 2

HP iLO MP 3

True

True

HP-UX

HP-UX 11iv3 (B.11.31)

True

True

IBM i

IBM i 7.3

IBM i 7.4

True

True

Junos - Juniper Networks

Junos - Juniper Networks 19

Junos - Juniper Networks 20

Junos - Juniper Networks 21

Junos - Juniper Networks 22

True

True

LDAP

OpenLDAP 2.4

True

False

Linux

 

True

True

macOS

macOS 11

macOS 12

macOS 13

True

True

MongoDB

MongoDB 4.2

MongoDB 4.4

MongoDB 5.0

MongoDB 6.0

True

False

MySQL

MySQL 5.7

MySQL 8.0

True

False

Oracle

Oracle 19c

Oracle 21c

True

False

Oracle Linux (OL)

Oracle Linux (OL) 7

Oracle Linux (OL) 8

Oracle Linux (OL) 9

True

True

Other

 

False

False

Other Directory

 

True

False

Other Managed

 

True

False

PAN-OS

PAN-OS 9.1

PAN-OS 10.1

PAN-OS 10.2

True

True

PostgreSQL

PostgreSQL 11

PostgreSQL 12

PostgreSQL 13

PostgreSQL 14

PostgreSQL 15

True

False

RACF - Mainframe

RACF - Mainframe z/OS V2.1 Security Server zSeries

RACF - Mainframe z/OS V2.2 Security Server zSeries

RACF - Mainframe z/OS V2.3 Security Server zSeries

True

True

RACF - RACF - Mainframe LDAP

RACF - Mainframe LDAP z/OS V2.1 Security Server zSeries

RACF - RACF - Mainframe LDAP z/OS V2.2 Security Server zSeries

RACF - RACF - Mainframe LDAP z/OS V2.3 Security Server zSeries

True

False

Red Hat Enterprise Linux (RHEL)

Red Hat Enterprise Linux (RHEL) 7

Red Hat Enterprise Linux (RHEL) 8

Red Hat Enterprise Linux (RHEL) 9

True

True

Red Hat Directory Server

Red Hat Directory Server 11

True

False

SAP HANA

SAP HANA

SAP HANA 2

True

False

SAP Netweaver Application Server

SAP Netweaver Application Server 7.3

SAP Netweaver Application Server 7.4

SAP Netweaver Application Server 7.5

True

False

Solaris

Solaris 10

Solaris 11.3

Solaris 11.4

True

True

SonicOS

SonicOS 6.5

SonicOS 7

SonicOSX 7

True

False

SonicWALL SMA or CMS

SonicWALL SMA or CMS 11.3.0

True

False

SQL Server

SQL Server 2012

SQL Server 2014

SQL Server 2016

SQL Server 2017

SQL Server 2019

SQL Server 2022

True

False

SUSE Linux Enterprise Server (SLES)

SUSE Linux Enterprise Server (SLES) 12

SUSE Linux Enterprise Server (SLES) 15

True

True

Sybase (Adaptive Server Enterprise)

Sybase (Adaptive Server Enterprise) 15.7

Sybase (Adaptive Server Enterprise) 16

Sybase (Adaptive Server Enterprise) 17

True

False

Top Secret - Mainframe

Top Secret - Mainframe r14 zSeries

Top Secret - Mainframe r15 zSeries

Top Secret - Mainframe r16 zSeries

True

False

Top Secret - Mainframe LDAP

Top Secret - Mainframe LDAP r14

Top Secret - Mainframe LDAP r15

Top Secret - Mainframe LDAP r16

True

True

Ubuntu

Ubuntu 18.04 LTS

Ubuntu 22.04 LTS

Ubuntu 22.10

True

True

Windows Desktop

Windows Desktop (SSH)

Windows Desktop (WinRM)

Windows Server

Windows Server (SSH)

Windows Server (WinRM)

Windows (SSH) 10

Windows (SSH) 11

Windows (SSH) Server 2012

Windows (SSH) Server 2012 R2

Windows (SSH) Server 2016

Windows (SSH) Server 2019

Windows (SSH) Server 2022

Windows 10

Windows 11

Windows Server 2012

Windows Server 2012 R2

Windows Server 2016

Windows Server 2019

Windows Server 2022

True

True

Table 5: Supported platforms: Directories that can be searched
Platform Name Platform Version

Microsoft Active Directory

Windows 2008+ DFL/FFL

LDAP

2.4

For all supported platforms, it is assume that you are applying the latest updates. For unpatched versions of supported platforms, Support will investigate and assist on a case by case basis but it may be necessary for you to upgrade the platform or use SPP's custom platform feature.

Custom platforms

The following example platform scripts are available:

  • Custom HTTP
  • Linux SSH
  • Telnet
  • TN3270 transports are available

For more information, see Custom Platforms and Creating a custom platform script in the Safeguard for Privileged Passwords Administration Guide.

Sample custom platform scripts and command details are available at the following links available from the Safeguard Custom Platform Home wiki on GitHub:

CAUTION: Example scripts are provided for information only. Updates, error checking, and testing are required before using them in production. Safeguard for Privileged Passwords checks to ensure the values match the type of the property that include a string, boolean, integer, or password (which is called secret in the API scripts). Safeguard for Privileged Passwords cannot check the validity or system impact of values entered for custom platforms.

Long Term Support (LTS) and Feature Releases

Releases use the following version designations:

  • Long Term Support (LTS) Releases: The first digit identifies the release and the second is a zero (for example, 6.0 LTS).
  • Maintenance LTS Releases: A third digit is added followed by LTS (for example, 6.0.6 LTS).
  • Feature Releases: The Feature Releases version numbers are two digits (for example, 6.6).

Customers choose between two paths for receiving releases: Long Term Support (LTS) Release or Feature Release. See the following table for details.

Table 6: Comparison of Long Term Support (LTS) Release and Feature Release
  Long Term Support (LTS) Release Feature Release
General Release

Scope: Includes new features, resolved issues and security updates

Versioning: The first digit identifies the LTS and the second digit is a 0 (for example, 6.0 LTS, 7.0 LTS, and so on).

Scope: Includes the latest features, resolved issues, and other updates, such as security patches for the OS

Versioning: The first digit identifies the LTS and the second digit is a number identifying the Feature Release (for example, 6.6, 6.7, and so on).

Maintenance Release

Scope: Includes critical resolved issues

Versioning: A third digit designates the maintenance LTS Release (for example, 6.0.6 LTS).

Scope: Includes highly critical resolved issues

Versioning: A third digit designates the maintenance Feature Release (for example, 6.6.1).

Release and support details can be found at Product Life Cycle.

CAUTION: Downgrading from the latest Feature Release, even to an LTS release, voids support for SPP.

One Identity strongly recommends always installing the latest revision of the release path you use (Long Term Support path or Feature Release path).

Moving between LTS and Feature Release versions

You can move from an LTS version (for example, 6.0.7 LTS) to the same feature version (6.7) and then patch to a later feature version. After that, you can patch from the minimum version for the patch, typically N-3. If you move from an LTS version to a feature version, you will receive a warning like the following which informs you that you will only be able to apply a Feature Release until the next LTS Release:

Warning: You are patching to a Feature Release from an LTS Release. If you apply this update, you will not be able to upgrade to a non-Feature Release until the next LTS major release version is available. See the Administration Guide for details.

You cannot move from a Feature Release to LTS Release. For example, you cannot move from 6.7 to 6.0.7 LTS. You have to keep upgrading with each new Feature Release until the next LTS Release version is published. For this example, you would wait until 7.0 LTS is available.

Patching

You can only patch from a major version. For example, if you have version 6.6 and want to patch to 7.7, you must patch to 7.0 LTS and then apply 7.7.

An LTS major version of Safeguard for Privileged Passwords (SPP) will only work with the same LTS major version of Safeguard for Privileged Sessions (SPS). For the best experience, it is recommended you use the latest supported version.

Appliance specifications

The Safeguard for Privileged Passwords Appliance is built specifically for use only with the Safeguard for Privileged Passwords privileged management software that is already installed and ready for immediate use. It comes hardened to ensure the system is secure at the hardware, operating system, and software levels.

The following two tables list the Safeguard for Privileged Passwords 4000 Appliance, 3000 Appliance and 2000 Appliance specifications and power requirements.

Table 7: 4000 Appliance: Feature specifications
4000 Appliance Feature / Specification
Processor Intel Xeon 4310T 2.3 GHz
# of Processors 1
# of Cores per Processor 10 cores (20 threads)
L2/L3 Cache 15 MB Cache
Chipset Intel C621A Chipset
DIMMs ECC DDR4-2667
RAM 64 GB
Internal HD Controller Supermicro AOC-S3908L-H8iR-16DD
Disk Hard Drive 4 x Seagate Exos 7E10 2TB SAS 512e
Availability TPM 2.0, EEC Memory, Redundant PSU
I/O Slots 2x PCIe 4.0 x16 FHHL 1x PCIe 4.0 x16 HHHL
RAID RAID10
NIC/LOM Broadcom P210TP - 2 x 10G BASE-T Broadcom P210P - 2 x 10G SFP+
Power Supplies Redundant, 500W/600W, Auto Ranging (100v~240V), RoHS and REACH compliant
Fans 6 Supermicro FAN-0141L
Chassis 1U Rack

Dimensions

(HxWxD)

43 x 437.0 x 650.0 (mm)

1.7 x 17.2 x 25.6 (in)

Weight Max: 37 lbs (16.78 Kg)
Table 8: 3000 Appliance: Feature specifications
3000 Appliance Feature / Specification
Processor Intel Xeon E3-1275v6 3.8 GHz
# of Processors 1
# of Cores per Processor 4 cores (8 threads)
L2/L3 Cache 8MB L3 Cache
Chipset Intel C236 Chipset
DIMMs

Unbuffered ECC UDIMM DDR4 2400MHz

RAM 32 GB
Internal HD Controller LSI MegaRAID SAS 9361-4i Single
Disk Hard Drive 4 x Seagate 7E2000 2TB SAS 512E
Availability TPM 2.0, EEC Memory, Redundant PSU
I/O Slots x16 PCIe 3.0, x8 PCIe 3.0
RAID RAID10
NIC/LOM 4 port - dual GbE LAN with Intel i210-AT
Power Supplies

Redundant, 700W, Auto Ranging (100v~240V), ACPI compatible

Fans 1 Supermicro SNK-P0046P and 2 Micron 16GB 2666MHz 2R ECC Unb Z01B Dual Label
Chassis 1U Rack

Dimensions

(HxWxD)

43 x 437.0 x 597.0 (mm)

1.7 x 17.2 x 23.5 (in)

Weight Max: 37 lbs (16.78 Kg)
Table 9: 2000 Appliance: Feature specifications
2000 Appliance Feature / Specification
Processor Intel Xeon E3-1275v5 3.60 GHz
# of Processors 1
# of Cores per Processor 4
L2/L3 Cache 4 x 256KB L2, 8MB L3 SmartCache
Chipset Intel C236 Chipset
DIMMs DDR4-2400 ECC Unbuffered DIMMs
RAM 32GB
Internal HD Controller LSI MegaRAID SAS 9391-4i 12Gbps SAS3
Disk 4 x Seagate EC2.5 1TB SAS 512e
Availability TPM 2.0, EEC Memory, Redundant PSU
I/O Slots x16 PCIe 3.0, x8 PCIe 3.0
RAID RAID10
NIC/LOM 3 x Intel i210-AT GbE
Power Supplies Redundant, 700W, Auto Ranging (100v~240V), ACPI compatible
Fans 4 x 40mm Counter-rotating, Non-hot-swappable
Chassis 1U Rack

Dimensions

(HxWxD)

43 x 437.0 x 597.0 (mm)

1.7 x 17.2 x 23.5 (in)

Weight Max: 46 lbs (20.9 Kg)
Miscellaneous FIPS Compliant Chassis
Table 10: 4000 Appliance, 3000 Appliance and 2000 Appliance: Power requirements
Input Voltage 100-240 Vac
Frequency 50-60Hz
Power Consumption (Watts) 170.9
BTU 583

Safeguard for Privileged Passwords is also available as a virtual appliance and from the cloud.

Appliance LCD and controls

The front panel of the Safeguard for Privileged Passwords 4000 Appliance, 3000 Appliance and 2000 Appliance contain the following controls for powering on, powering off, and scrolling through the LCD display.

  • Green check mark button: Use the Green check mark button to start the appliance. Press the Green check mark button for NO more than one second to power on the appliance.

    Caution: Once the Safeguard for Privileged Passwords Appliance is booted, DO NOT press and hold the Green check mark button. Holding this button for four or more seconds will cold reset the power of the appliance and may result in damage.
  • Red X button: Use the Red X button to shut down the appliance. Press and hold the Red X button for four seconds until the LCD displays POWER OFF.

    Caution: Once the Safeguard for Privileged Passwords Appliance is booted, DO NOT press and hold the Red X button for more than 13 seconds. This will hard power off the appliance and may result in damage.
  • Down, up, left, and right arrow buttons: When the appliance is running, the LCD home screen displays: Safeguard for Privileged Passwords <version number>. Use the arrow buttons to scroll through the following details:
    • Serial: <appliance serial number>
    • X0: <appliance IP address>
    • MGMT: <management IP address>
    • MGMT MAC: <media access control address>
    • IPMI: <IP address for IPMI>
Table 11: Appliance LCD and controls
Control Description

Green check mark button

Use the Green check mark button to start the appliance. Press the Green check mark button for NO MORE THAN one second to power on the appliance.

Caution: Once the Safeguard for Privileged Passwords Appliance is booted, DO NOT press and hold the Green check mark button. Holding this button for four or more seconds will cold reset the power of the appliance and may result in damage.

Red X button

Use the Red X button to shut down the appliance. Press and hold the Red X button for four seconds until the LCD displays POWER OFF.

Caution: Once the Safeguard for Privileged Passwords Appliance is booted, DO NOT press and hold the Red X button for more than 13 seconds. This will hard power off the appliance and may result in damage.
Down, up, left, and right arrow buttons

When the appliance is running, the LCD home screen displays:

  • Safeguard for Privileged Passwords <version number>

Use the arrow buttons to scroll through the following details:

  • Serial: <appliance serial number>
  • X0: <appliance IP address>
  • MGMT: <management IP address>
  • MGMT MAC: <media access control address>
  • IPMI: <IP address for IPMI>
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation