Tchater maintenant avec le support
Tchattez avec un ingénieur du support

Identity Manager 9.1.3 - Target System Synchronization Reference Guide

Target system synchronization with the Synchronization Editor Working with the Synchronization Editor Basics of target system synchronization Setting up synchronization
Starting the Synchronization Editor Creating a synchronization project Configuring synchronization
Setting up mappings Setting up synchronization workflows Connecting systems Editing the scope Using variables and variable sets Setting up start up configurations Setting up base objects
Overview of schema classes Customizing the synchronization configuration Checking the consistency of the synchronization configuration Activating the synchronization project Defining start up sequences
Running synchronization Synchronization analysis Setting up synchronization with default connectors Updating existing synchronization projects Script library for synchronization projects Additional information for experts Troubleshooting errors when connecting target systems Configuration parameters for target system synchronization Configuration file examples

Defining the editor for existing synchronization projects

To apply patches to existing synchronization projectsClosed, use the ShellPatchEditor. The definition part of this editor contains the following information:

Table 87: ShellPatchEditor editor definitions

Elements

Description

PatchesToApply

Comma-separated list of patch numbers for all patches that are to be applied.

Only patches that do not require any user input can be applied.

Keywords can be specified in order to apply all available patches.

  • AllFixes: Applies all patches for resoled issues.

  • AllFeatures: Applies all patches for new features.

Example: <Data Name="PatchesToApply" Display="Patches to apply" Type="System.String, mscorlib">AllFixes,AllFeatures</Data>

All dependent milestones will also be applied.

Synchronization Editor Command Line Interface

Once you have created a configuration file and have customizedClosed it accordingly, you can generate new synchronization projectsClosed or update existing synchronization projects with the Synchronization Editor Command Line InterfaceClosed. You can also opt to use the Synchronization Editor Module for Windows PowerShellClosed to do this. For more information, see Synchronization Editor Module for Windows PowerShell.

To create synchronization projects with the Synchronization Editor Command Line Interface

  1. Start a command line editor.

  2. Switch to the One Identity Manager installation directory.

  3. Run the Synchronization Editor Command Line Interface with the -V option and set the parameter values.

    SynchronizationEditor.CLI.exe --CreateShell {<Options>} <configuration file> {<Parameter>}

    NOTE: If the value of a parameter contains a space or special character, it must be enclosed in quotes.

    Example: SynchronizationEditor.CLI.exe --CreateShell -V /Workspace=D:\ActiveDirectoryProject.sews /SetParam SyncProject="Synchronization project for Active Directory domain XYZ"

  4. Enter values for the parameters requiring user input.

    • To enter an empty value, press ENTER.

    • To transfer the default value defined in the configuration file, click Esc.

  5. (Optional) Run the Synchronization Editor Command Line Interface with the option -R.

    This establishes a remote connection.

    Example: SynchronizationEditor.CLI.exe --CreateShell -R /Workspace=D:\ActiveDirectoryProject.sews

  6. If no error occur, run steps 3 and 4 with the -S option.

    If the synchronization project was created with a project templateClosed, the schemas are shrunk when saved.

To update synchronization projects with the Synchronization Editor Command Line Interface

  1. Start a command line editor.

  2. Switch to the One Identity Manager installation directory.

  3. Run the Synchronization Editor Command Line Interface with the -V option and set the parameter values.

    SynchronizationEditor.CLI.exe --PatchShell {<options>} <configuration file> {<parameter>}

    NOTE: If the value of a parameter contains a space or special character, it must be enclosed in quotes.

    Example: SynchronizationEditor.CLI.exe --PatchShell -V /Workspace=D:\ActiveDirectoryProject.sews /SetParam SyncProject="CCC-99D111DD1CF11111BCF11111E1111BE9" /SetParam Patches=AllFixes,Milestone_OneIM_8.0.2017.1104,VPR#12345,VPR#23456,VPR#34567

    • If the target system is accessed when the patch is applied and the connection parameters in the default variable set contain encrypted values, you will be prompted to enter the decrypted values. The names of the required parameters are displayed.

      TIP: Use these parameter names to add a parameter in the configuration file for each encrypted connection parameter. This allows values for the encrypted connection parameters to be passed to the Synchronization Editor Command Line Interface when it is called.

      The parameter names must conform to the following naming convention: Decryption_DefaultVariableSet_<variable name>.

      Example of a parameter definition: <Parameter Name="Decryption_DefaultVariableSet_Password" Display="Password of target system user" IsQueryParameter="False"</Parameter>

      Example of a command line call: SynchronizationEditor.CLI.exe --PatchShell -V /Workspace=D:\ActiveDirectoryProject.sews /SetParam SyncProject="CCC-99D111DD1CF11111BCF11111E1111BE9" /SetParam Patches=AllFixes /SetParam Decryption_DefaultVariableSet_Password="A123-z987"

  4. Enter values for the parameters requiring user input.

    • To enter an empty value, press ENTER.

    • To transfer the default value defined in the configuration file, click Esc.

  5. (Optional) Run the Synchronization Editor Command Line Interface with the option -R.

    This establishes a remote connection.

    Example: SynchronizationEditor.CLI.exe --PatchShell -R /Workspace=D:\ActiveDirectoryProject.sews

  6. If no error occur, run steps 3 and 4 with the -S option.

    If the synchronization project was created with a project template, the schemas are shrunk when saved.

TIP: Run the SynchronizationEditor.CLI.exe without additional input to view help for the Synchronization Editor Command Line Interface.

Table 88: Synchronization Editor Command Line Interface commands

Command

Description

--CreateShell

Creates a new synchronization project using the data from the defined workspace.

Short form: --CS

--PatchShell

Applies patches to an existing synchronization project.

Short form: --PS

Table 89: Synchronization Editor Command Line Interface options

Option

Description

-?|H

Displays help.

-Q

No alert before running irreversible actions.

-V

The Synchronization Editor Command Line Interface is run in verbose mode. Use this option for debugging.

-S

Saves the new synchronization project in the database. If this option is not given, creating the synchronization project is simulated.

-N

Defines whether the Synchronization Editor Command Line Interface opens in non-interactive mode. This may cause requests for parameter input to fail.

Missing encrypted values are also queried in non-interactive mode.

-R

Establishes the connection to the target system over a remote service connection.

Use a remote connection if it is not possible to directly access the target system from the workstation where the Synchronization Editor is installed.

Table 90: Parameter declaration

Parameters

Description

/Workspace

Full or relative path of the configuration file.

/SetParam

Sets the value of the parameter defined in the configuration file. Overwrites default values.

Format: Parameter name=value

Pay attention to the upper and lower case characters in the parameter name.

If a value contains a space or special character, it must be enclosed in quotes. Multiple parameters are declared individually: /SetParam ParamName1=Value1 /SetParam ParamName2=Value2

Synchronization Editor Module for Windows PowerShell

Once you have created a configuration file and have customizedClosed it accordingly, you can generate new synchronization projectsClosed or update existing synchronization projects with the Synchronization Editor Module for Windows PowerShellClosed. You can also opt to use the Synchronization Editor Command Line InterfaceClosed to do this. For more information, see Synchronization Editor Command Line Interface.

To create synchronization projects with the Synchronization Editor ModuleClosed for Windows PowerShell

  1. Start Windows PowerShell.

  2. Switch to the One Identity Manager installation directory.

  3. Load the Synchronization Editor Module for Windows PowerShell.

    Import-Module .\VI.Projector.Editor.PowerShell.dll

  4. Run the New-ProjectorShell CmdLet and set the value for the parameter.

    New-ProjectorShell -Workspace <configuration file> {option} {parameter}

    Example: New-ProjectorShell -Workspace D:\ActiveDirectoryProject.sews -WorkspaceParameter @{SyncProject="Synchronization Project for Active Directory Domain XYZ"}

    NOTE: Mandatory parameter are queried one at a time if you run the CmdLet without additional input.

  5. Enter values for the parameters requiring user input.

    • To enter an empty value, press ENTER.

  6. (Optional) Run the New-ProjectorShell CmdLet with the -Remote option.

    This establishes a remote connection.

    Example: New-ProjectorShell -Workspace D:\ActiveDirectoryProject.sews -Remote

  7. If no error occur, run steps 3 and 4 with the -SaveToDatabase option.

    If the synchronization project was created with a project templateClosed, the schemas are shrunk when saved.

To update synchronization projects with the Synchronization Editor Module for Windows PowerShell

  1. Start Windows PowerShell.

  2. Switch to the One Identity Manager installation directory.

  3. Load the Synchronization Editor Module for Windows PowerShell.

    Import-Module .\VI.Projector.Editor.PowerShell.dll

  4. Run the Update-ProjectorShell CmdLet and set the value for the parameter.

    Update-ProjectorShell -Workspace <configuration_file> {option} {parameters}

    Example: Update-ProjectorShell -Workspace D:\ActiveDirectoryProject.sews -WorkspaceParameter @{SyncProject="CCC-99D111DD1CF11111BCF11111E1111BE9";Patches="AllFixes,Milestone_OneIM_8.0.2017.1104,VPR#12345,VPR#23456,VPR#34567"}

    NOTE: Mandatory parameter are queried one at a time if you run the CmdLet without additional input.

    • If the target system is accessed when the patch is applied and the connection parameters in the default variable set contain encrypted values, you will be prompted to enter the decrypted values. The names of the required parameters are displayed.

      TIP: Use these parameter names to add a parameter in the configuration file for each encrypted connection parameter. This allows values for the encrypted connection parameters to be passed to the CmdLet when it is called.

      The parameter names must conform to the following naming convention: Decryption_DefaultVariableSet_<variable name>.

      Example of a parameter definition: <Parameter Name="Decryption_DefaultVariableSet_Password" Display="Password of target system user" IsQueryParameter="False"</Parameter>

      Example of a command line call: Update-ProjectorShell -Workspace D:\ActiveDirectoryProject.sews -WorkspaceParameter @{SyncProject="CCC-99D111DD1CF11111BCF11111E1111BE9";Patches="AllFixes";Decryption_DefaultVariableSet_Password="A123-z987"}

  5. Enter values for the parameters requiring user input.

    • To enter an empty value, press ENTER.

  6. (Optional) Run the Update-ProjectorShell CmdLet with the -Remote option.

    This establishes a remote connection.

    Example: Update-ProjectorShell -Workspace D:\ActiveDirectoryProject.sews -Remote

  7. If no error occur, run steps 3 and 4 with the -SaveToDatabase option.

    If the synchronization project was created with a project template, the schemas are shrunk when saved.

Table 91: Synchronization Editor Module for Windows PowerShell CmdLets

CmdLet

Description

New-ProjectorShell

Creates a new synchronization project using the data from the defined workspace.

Update-ProjectorShell

Applies patches to an existing synchronization project.

Table 92: Options

Option

Description

-?

Displays help.

-Workspace

Full or relative path of the configuration file.

-SaveToDatabase

Saves the new synchronization project in the database. If this option is not given, creating the synchronization project is simulated.

-WorkspaceParameter

Sets the value of the parameter defined in the configuration file. Overwrites default values.

Format: @{Parameter name="value"}

Multiple parameters are separated with semicolons: -WorkspaceParameter @{ParamName1="Value1";ParamName2="Value2"}

-Remote

Establishes the connection to the target system over a remote service connection.

Use a remote connection if it is not possible to directly access the target system from the workstation where the Synchronization Editor is installed.

Maintaining the data store

You set the maintenanceClosed mode in the start up configuration. Depending on the mode, maintenance of the data store is done after each synchronizationClosed whereby One Identity Manager attempts to clean up unresolved references. The contents of the data store can also be displayed in the Synchronization EditorClosed and you can start maintenance manually. In this case, you decide if you want to run maintenance directly on the workstation that the Synchronization Editor was started on, or if it should be run by the One Identity Manager ServiceClosed.

If the One Identity Manager connection is in expert mode, you also see the Data store view.

To display the contents of the data store

  1. Select the Configuration > One Identity Manager connection category.

  2. Open the Data store view.

    In the overview pane you can see the data store contents.

To start maintenance manually

  1. In the Data store view, click Perform maintenance.

  2. To allow maintenance to be run by the One Identity Manager Service, click Yes.

    - OR -

    To run maintenance on the current workstation, click No.

Related topics
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation