Unable to login to the PAR Interface via the Network Port
WORKAROUND
1. Isolate the problem by connecting to the network Port via a cross cable directly.
2. Login to the parconfig interface, https://192.168.1.105:8443/parconfig/
Click on the Remote Access menu.
Is the Remote Configuration Access set to Enabled ?
3.For TPAM 2.1
Change the Network IP to 192.168.0.245/24
Change the Firewall IP to 192.168.0.246/24
Save the setting and verify the IP Address is updated. Retest connectivity with the CrossCable to Network Port.
This test serves to isolate a possible routing issue within the appliance itself when the console port and Network port is on the same subnet
© 2024 One Identity LLC. ALL RIGHTS RESERVED. Terms of Use Privacy Cookie Preference Center