Converse agora com nosso suporte
Chat com o suporte

One Identity Safeguard for Privileged Passwords 6.0.10 LTS - Administration Guide

Introduction System requirements and versions Using API and PowerShell tools Using the virtual appliance and web management console Cloud deployment considerations Setting up Safeguard for Privileged Passwords for the first time Using the web client Getting started with the desktop client Using the desktop client Search box Privileged access requests Toolbox Accounts Account Groups Assets Asset Groups Discovery Entitlements Partitions Settings
Access Request settings Appliance settings Asset Management settings Backup and Retention settings Certificate settings Cluster settings External Integration settings Messaging settings Profile settings Safeguard Access settings
Users User Groups Disaster recovery and clusters Administrator permissions Preparing systems for management Troubleshooting Frequently asked questions Appendix A: Safeguard ports Appendix B: SPP 2.7 or later migration guidance Appendix C: SPP and SPS join guidance Appendix D: Regular Expressions SPP glossary

Licensing

It is the responsibility of the Appliance Administrator to manage the Safeguard for Privileged Passwords licenses. For more information, see License: hardware, virtual, expiration.To avoid disruptions in the use of Safeguard for Privileged Passwords, the Appliance Administrator must configure the SMTP server, and define email templates for the License Expired and the License Expiring Soon event types. This ensures you will be notified of an approaching expiration date. For more information, see Enabling email notifications.

To enter licensing information when you first log in

The first time you log in as the Appliance Administrator, you are prompted to add one or more licenses. The Success dialog displays when a license is added.

On the virtual appliance, the license is added as part of Initial Setup. For more information, see Setting up the virtual appliance.

To add new licenses from Settings

  1. Go to Licensing:
    • (web client): Click  Settings on the left. The Settings: Appliance page displays. Click Licensing .
    • (desktop client): Navigate to Administrative Tools | Settings | Appliance | Licensing.
  2. Click to upload a new license file.
  3. Browse to select the license file.

    Once you add a license, you will see the current license information and a link that allows you to update the license.

These tasks can also be performed from Licensing:

  • To add another module license, click Add License and complete the information.
  • To delete a license, select the license, then click Delete.

(desktop client) To update a module license

  1. Navigate to Administrative Tools | Settings | Appliance | Licensing.
  2. Select Update License in the lower left corner of a module's licensing information pane.
  3. Browse to select the license file. Select Open.

Lights Out Management (BMC)

The Lights Out Management feature allows you to remotely manage the power state and serial console to Safeguard for Privileged Passwords using the baseboard management controller (BMC). When a LAN interface is configured, this allows the Appliance Administrator to power on an appliance remotely or to interact with the Recovery Kiosk.

It is the responsibility of the Appliance Administrator to enable and configure the Lights Out Management feature. When Lights Out Management is enabled, the Appliance Administrator can set or change the password and modify the network information for the baseboard management console (BMC). When disabled, Safeguard for Privileged Passwords immediately resets the password to a random value and resets the network settings to default values.

IMPORTANT: This feature requires a LAN interface to be enabled and configured. One Identity Safeguard for Privileged Passwords's BMC supports the following LAN interfaces to provide this functionality:

  • SSH
  • IPMI v2
  • Web
  • Serial over Lan

It is strongly recommended that the LAN interface only be enabled in trusted environments.

To enable Lights Out Management

  1. Access Lights Out Management in one of two ways:
  2. Click the Enable Lights Out Management toggle to enable or disable this feature. Set toggle on or toggle off.
  3. Once enabled, enter the following information about the BMC:
    1. IP address: The IPv4 address of the host machine.
    2. Netmask: The network mask IPv4 address.
    3. Default Gateway: The default gateway IPv4 address.
  4. Click the Set BMC Admin Password button to set the password for the host machine.

    Maximum password length: 20 characters.

    NOTE: If this feature was previously enabled, you will see an Update BMC Admin Password button instead. Optionally, click the Update BMC Admin Password button to reset the password for the host machine.

  5. Click OK to save the settings on the host machine.

NOTE: Once Lights Out Management is enabled in Safeguard for Privileged Passwords, you can access the BMC via a web interface or by using SSH to connect to the IPMI port to remotely manage the power state and serial console to Safeguard for Privileged Passwords. The default user for accessing the BMC is ADMIN.

Network Diagnostics

Safeguard for Privileged Passwords makes these diagnostic tests available for the Appliance Administrator and Operations Administrator.

NOTE: When you run these diagnostic tests, they are run on the appliance.

Navigate to Administrative Tools | Settings | Appliance |Network Diagnostics.

Table 113: Appliance Tests
Test Description
Ping To verify network connectivity and response time between the appliance to the specified host.
NS Lookup To obtain DNS details of the specified host in relation to the appliance.
Trace Route To obtain route information; traceroute determines the paths packets take from one IP address to another.
Telnet

To test TCP/IP connectivity between the appliance and specified host.

Show Routes To retrieve routing table information.
Related Topics

Troubleshooting

Frequently asked questions

Ping

Use the ping test to verify network connectivity and response time between the Safeguard for Privileged Passwords Appliance and the specified host.

Navigate to Administrative Tools | Settings | Appliance |Diagnostics.

Table 114: Ping diagnostic test settings
Property Description

Ping through

Select the network interface to issue the diagnostic command:

  • Network (X0): To ping the primary interface.

IP or Hostname

Enter the remote host's IP address or Hostname.

Ping

Click Ping to run the test.

The test results display in the Output window.

More Settings

Select More Settings to configure these additional (optional) options:

  • Resolve IP addresses to hostnames
  • Number of echo requests to send
  • Send buffer size
  • Set 'don't fragment' flag in packet (IPv4 only)
  • Time to live
  • Type of serve
  • Record route for count hops (IPv4 only)
  • Time stamp for count hops (IPv4 only)
  • Timeout in milliseconds to wait for each reply
Documentos relacionados

The document was helpful.

Selecione a classificação

I easily found the information I needed.

Selecione a classificação