In some cases, uploading large files over HTTP is not possible. In such cases, you can update the firmware using SSH.
|
|
Caution:
The recommended way to update the firmware is using the One Identity Safeguard for Privileged Sessions (SPS) web interface (see Upgrading One Identity Safeguard for Privileged Sessions (SPS)). Update the SPS firmware using SSH is only if you cannot update the firmware using the web interface. Note that updating using SSH may be removed from later versions of SPS. |
To update the firmware using SSH
-
Download the firmware file to your computer.
-
Log in to SPS remotely using SSH, and select Shells > Core shell from the console menu.
-
Copy the firmware to the SPS host, for example, into the /root/ directory.
If you are copying the firmware to SPS using SCP and you issue the copy command on the client side and not within the core firmware, the root directory of the core firmware is: /mnt/firmware/root
-
Install the firmware: /opt/scb/bin/firmwarectl install <path-to-firmware>
This command installs the firmware into the first empty slot, and returns the value of the slot where the firmware has been installed.
-
Check if you can upgrade to the new firmware, and resolve any errors before continuing: /opt/scb/bin/firmwarectl precheck <slot-number-of-the-firmware>
In the returned values, "exitcode": 0 means that the precheck has finished without any errors. "exitcode": 1 means that errors have occurred, and the contents of "output": [] gives you a clue as to what is causing the problem.
-
Activate the new firmware: /opt/scb/bin/firmwarectl activate <slot-number-of-the-firmware>
Using the /opt/scb/bin/firmwarectl list command, you can check whether activation has been successful. In the returned values, look for your slot number and the value of "active":, it should say true. For example:
...
"slot": 3,
"precheck": true,
"active": true,
"boot_link": "mnt/boot-firmware/slot3",
"core_link": "mnt/firmware/slot3",
"branch": "5.6",
"version": "5.6.0a",
"current": false,
...
-
Reboot SPS: xcbclient self xcb_do_reboot
-
If the upgrade is successful, delete any unused firmware: /opt/scb/bin/firmwarectl delete <slot-number-of-unused-firmware>
-
Delete the firmware file you uploaded to SPS, it is not needed anymore: rm -fv /root/<firmware-file-you-uploaded>
For manual archiving, or to migrate it to another One Identity Safeguard for Privileged Sessions (SPS) unit, you can export/import the configuration of SPSfrom the console using the /opt/scb/bin/configbundle.py script.
NOTE: You must run the /opt/scb/bin/configbundle.py script using the root user.
NOTE: The configuration of your SPS may contain sensitive information. Make sure you delete any configuration export files that are not needed anymore.
To export/import the configuration of SPS from the console
-
Run the following command to export the configuration of your SPS:
/opt/scb/bin/configbundle.py create --bundle /<my destination folder>/bundle.tar.gz
Where:
-
/opt/scb/bin/configbundle.py: The script you execute to export the configuration.
-
create: The option that lets you export a configuration.
-
--bundle: The option used to specify the bundle file.
-
/<my destination folder>/bundle.tar.gz: The path to the file where you wish to export the configuration.
Replace <my destination folder> with the name of the folder where you wish to store the exported configuration.
-
Run the following command to import the configuration of your SPS:
/opt/scb/bin/configbundle.py import --bundle /<my destination folder>/bundle.tar.gz
Where:
-
/opt/scb/bin/configbundle.py: The script you execute to import the configuration.
-
import: The option that lets you import a configuration.
-
--bundle: The option used to specify the bundle file.
-
/<my destination folder>/bundle.tar.gz: The path to the file from which you wish to import the configuration.
Replace <my destination folder> with the name of the folder where your configuration export file is stored.
If you need to switch from an One Identity Safeguard for Privileged Sessions (SPS) instance to another SPS instance, for example, your SPS appliance is old and you want to switch it to a new one, you can use the console menu to copy all data between SPS instances.
You can perform data migration between SPS instances having different versions. Data migration has the same version requirements as upgrade. For more information about upgrading, see Upgrading One Identity Safeguard for Privileged Sessions (SPS).
To copy all data and switch to the new SPS instance
-
From the console menu, select Data migration between SPS instances.
-
To initiate a preliminary copying of all the data from the source SPS to the target SPS without stopping the data traffic on the source SPS, select Copy-only of all data to a new SPS instance (Optional).
This step is optional but recommended to decrease production downtime caused by data and role migration. You can perform this step several times if required, for example, if the volume of your daily traffic is high.
Skip this step only if a possible downtime due to having no preliminary copy is not an issue.
-
When you are ready to make the final switch to the new SPS instance, select Copy and switch to the new SPS instance (Required).
This process stops the data traffic on the source SPS, then copies all data from the source SPS to the target SPS. The target SPS also acquires the IP address of the source SPS.
When sealed mode is enabled, the following settings are automatically applied:
-
One Identity Safeguard for Privileged Sessions (SPS) cannot be accessed remotely via SSH for maintenance.
-
The root password of SPS cannot be changed in sealed mode.
-
It is not possible to upload or delete plugins in sealed mode.
-
Sealed mode can be disabled only from the local console. For details, see Disabling sealed mode.
Enabling sealed mode
To enable sealed mode, use one of the following methods:
-
Select the Sealed mode option during the Welcome Wizard.
-
Select Basic Settings > System > Sealed mode > Activate sealed mode on the SPS web interface.
-
Log in to SPS as root using SSH or the local console, and select Sealed mode > Enable from the console menu.
