This subcommand displays on-screen help. If another subcommand is given as an argument, help for that subcommand will be displayed.
Syntax
help <subcommand>
In this example, the general help section will be displayed.
pmgit help
In this example, the help for enable subcommand will be displayed.
pmgit help enable
pmjoin_plugin -h | --help [-abioqv]
[-d <variable>=<value>] [<policy_server_host>] [-bv] -u
[--accept] [--batch] [--define <variable>=<value>] [--interactive]
[--io-plugin-only][--pipestdin][--verbose] <policy_server_host> ...
[--batch] [--verbose] -unjoin -N policy_name [--policyname policy_name]
Run the pmjoin_plugin command after installing the Sudo Plugin package (qpm-plugin) on a remote host to allow it to communicate with the servers in the policy group.
pmjoin_plugin has the following options.
| Option | Description |
|---|---|
| -a | --accept | Accepts the End User License Agreement (EULA), /opt/quest/qpm4u/pqm4u_eula.txt. |
| -b | --batch | Runss in batch mode, does not use colors or require user input. |
| -d <variable>=<value> | --define <variable>=<value> | Specifies a variable for the pm.settings file and its associated value. |
| -h | --help | Displays usage information. |
| -i | --interactive | Runs in interactive mode, prompting for configuration parameters instead of using the default values. |
| -o | --io-plugin-only | Configures only the I/O logging plugin (io_plugin) without the use of the Sudo Plugin (policy_plugin) . |
| -q | --pipestdin | Pipes password to stdin if password is required. |
| -u | --unjoin | Unjoins a Sudo Plugin host from the policy server. |
|
-N policy_name | --policyname policy_name |
Use policy_name as the name of the policy instead of the default. This option is used to specify the name of the policy that the server should use when making policy decisions. |
|
-v | --verbose |
Displays verbose output while configuring the host. |
pmkey -v
-a <keyfile>
[ [-l | -r | -i <keyfile>]
[-p <passphrase>] [-f]]Use the pmkey command to generate and install configurable certificates.
In order for a policy evaluation request to run, keys must be installed on all hosts involved in the request. The keyfile must be owned by root and have permissions set so only root can read or write the keyfile.
pmkey has the following options.
| Option | Description |
|---|---|
| -a <keyfile> | Creates an authentication certificate. |
| -i <keyfile> | Installs an authentication certificate. |
| -l |
Creates and installs a local authentication certificate to this file: /etc/opt/quest/qpm4u/.qpm4u/.keyfiles/key_localhost This is equivalent to running the following two commands:
|
| -f | Forces the operation. For example:
|
| -p <passphrase> |
Passes the passphrase on the command line for the -a or -l option. If not specified, pmkey prompts the user for a passphrase. |
| -r |
Installs all remote keys that have been copied to this directory: /etc/opt/quest/qpm4u/.qpm4u/.keyfiles/key_<hostname> This provides a quick way to install multiple remote keys. |
| -v | Displays the Safeguard version and exits. |
The following command generates a new certificate, and puts it into the specified file:
pmkey -a <filename>
The following command installs the newly generated certificate from the specified file:
pmkey -i <filename>
pmlicense -h
[-c]
-v [-c]
-v <xmlfile> [-c]
-l|-x <xmlfile> [-c] [-f] [-e]
-u [s|f][-c][-d m|y][-o <outfile>][-s d|h][-t u|p|k]
-r [e]The pmlicense command allows you to display current license information, update a license (an expired one or a temporary one before it expires) or create a new one. If you do not supply an option, then pmlicense displays a summary of the combined licenses configured on this host.
pmlicense has the following options.
| Option | Description |
|---|---|
| -c | Displays output in CSV, rather than human-readable format. |
| -d | Filters a license report; restricting the date to either:
|
| -e | Does not forward the license change to the other servers in the group. |
| -f | Does not prompt for confirmation in interactive mode. |
| -h | Displays usage. |
| -l <xmlfile> |
Configures the selected XML license file, and forwards it to the other servers in the policy group. This option must be run as the root user or a member of the pmpolicy group. |
| -o <outfile> | Sends report output to selected file rather than to the default. For csv output, the default is file: /tmp/pmlicense_report_<uid>.txt; for human-readable output, the default is stdout. |
| -r | Regenerates and configures the default trial license, removing any configured commercial licenses, and forwards this change to the other servers in the policy group. |
| -s | Sort the report data by either:
|
| -t | Filters license report by client type:
|
| -u | Displays the current license utilization on the master policy server:
|
| -v | If you do not provide a file argument, it displays the details of the currently configured license. If you provide a file argument, it verifies the selected XML license file and displays the license details. |
| -x <xmlfile> |
Configures the selected XML license file. This option is deprecated, use the "-l" option instead. |
License data is updated periodically by the pmloadcheck daemon. See pmloadcheck for details.
To display current license status information, enter the following:
# pmlicense
Safeguard displays the current license information, noting the status of the license. The output will be similar to the following:
*** One Identity Safeguard *** *** Privilege Manager for Unix VERSION 6.n.n (nnn) *** *** CHECKING LICENSE ON HOSTNAME:<host>, IP address: <IP> *** SUMMARY OF ALL LICENSES CURRENTLY INSTALLED *** *License Type PERMANENT *Commercial/Freeware License COMMERCIAL *Expiration Date NEVER *Max QPM4U Client Licenses 1000 *Max Sudo Policy Plugin Licenses 0 *Max Sudo Keystroke Plugin Licenses 0 *Authorization Policy Type permitted ALL *Total QPM4U Client Licenses In Use 2 *Total Sudo Policy Plugins Licenses in Use 0 *Total Sudo Keystroke Plugins Licenses in Use 0 *** LICENSE DETAILS FOR PRODUCT:QPM4U *License Version 1.0 *Licensed to company Testing *Licensed Product QPM4U(1) *License Type PERMANENT *Commercial/Freeware License COMMERCIAL *License Status VALID *License Key PSXG-GPRH-PIGF-QDYV *License tied to IP Address NO *License Creation Date Tue Feb 08 2012 *Expiration Date NEVER *Number of Hosts 1000
To update or create a new a license, enter the following at the command line:
pmlicense -l <xmldoc>
Safeguard displays the current license information, noting the status of the license, and then validates the information in the selected .xml file, for example:
*** One Identity Safeguard for Sudo *** *** Safeguard for Sudo VERSION 7.n.n (nnn) *** *** CHECKING LICENSE ON HOSTNAME:<host>, IP address:<IP> *** *** SUMMARY OF ALL LICENSES CURRENTLY INSTALLED *** *License Type PERMANENT *Commercial/Freeware License COMMERCIAL *Expiration Date NEVER *Max QPM4U Client Licenses 1000 *Max Sudo Policy Plugin Licenses 0 *Max Sudo Keystroke Plugin Licenses 0 *Authorization Policy Type permitted ALL *Total QPM4U Client Licenses In Use 2 *Total Sudo Policy Plugins Licenses in Use 0 *Total Sudo Keystroke Plugins Licenses in Use 0 *** Validating license file: <xmldoc> *** *** LICENSE DETAILS FOR PRODUCT:QPM4U *License Version 1.0 *Licensed to company Testing *Licensed Product QPM4U(1) *License Type PERMANENT *Commercial/Freeware License COMMERCIAL *License Status VALID *License Key PNFT-FDIO-YSLX-JBBH *License tied to IP Address NO *License Creation Date Tue Feb 08 2012 *Expiration Date NEVER *Number of Hosts 100 *** The selected license file (<xmldoc>) contains a valid license *** Would you like to install the new license? y Type y to update the current license. Archiving current license… [OK] *** Successfully installed new license ***
© 2024 One Identity LLC. ALL RIGHTS RESERVED. Terms of Use Privacy Cookie Preference Center