This procedure describes how to assign an alias IP address to a network interface on Linux platforms.

To assign an alias IP address to a network interface on Linux platforms

  1. Start a terminal console (for example, gnome-terminal, konsole, xterm, and so on).

  2. Issue the following command as root:

    ifconfig <ethX>:0 192.168.1.2

    where <ethX> is the ID of the network interface of the client, usually eth0 or eth1.

  3. Issue the ifconfig command. The <ethX>:0 interface appears in the output, having inet addr:192.168.1.2.

  4. Issue the ping -c 3 192.168.1.1 command to verify that syslog-ng Store Box (SSB) is accessible. A similar result is displayed:

    user@computer:~$ ping -c 3 192.168.1.1
            PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
            64 bytes from 192.168.1.1: icmp-seq=1 ttl=63 time=0.357 ms
            64 bytes from 192.168.1.1: icmp-seq=2 ttl=63 time=0.306 ms
            64 bytes from 192.168.1.1: icmp-seq=3 ttl=63 time=0.314 ms

            --- 192.168.1.1 ping statistics ---
            3 packets transmitted, 3 received, 0% packet loss, time 2013ms
            rtt min/avg/max/mdev = 0.306/0.325/0.357/0.030 ms