• |
SA Server must be configured in Quest ESSO, as explained in Section 9.1 Configuring Quest ESSO for SA Server Management. |
• |
If you have authenticated with a smart card, you must be a "Smart card manager" (this right is granted at card assignation time, in the Administration tab) to perform the task described in this section. |
1. |
2. |
Fill-in the SA Server tab with the instruction given in the following "SA Server" Tab Description section. This tab allows you to register the device as a SA Server device and to link the selected user to this device. |
3. |
Click OK. |
• |
Associated user area |
• |
If the SA Server is configured in "Full DB", you must fill-in the Password and Confirm password fields for the selected user. |
• |
• |
• |
Device ID field |
• |
Validate check box |
• |
Check box selected: the SA Server is updated with the information entered in the tab when you click the OK button, the link between the device and the user is established in SA Server. |
• |
Check box cleared: the SA Server is not updated with the information entered in the tab when you click the OK button, no link is established between the device and the user in SA Server. You can do the assignation later on: see Link User/Remove Use in 9.2.4 Managing the Link Between User and SA Server Device. |
• |
• |
If the Initialize option is set: the device state becomes "Initialized". If a user was linked to this device, the link is removed. |
• |
• |
If the Initialize option is set: the device state becomes "Initialized". If a user was linked to this device, the link is removed. |
© 2021 One Identity LLC. ALL RIGHTS RESERVED. Feedback Terms of Use Privacy