The following describes how to perform four-eyes authorization on One Identity Safeguard for Privileged Sessions (SPS).
To perform four-eyes authorization on SPS
When a user initiates a connection from a client and four-eyes authorization is required for the connection, SPS will pause the connection.
|
NOTE:
Four-eyes authorization can be set separately for every channel. However, if a client of an existing connection opens a new channel that requires four-eyes authorization, every channel is paused until the authorization is completed. |
Login to SPS, and select Four-Eyes from the main menu. The list of connections waiting for authorization will be displayed.
Figure 252: Four-Eyes — Performing four-eyes authorization
|
NOTE:
Only those connections will be listed, where your usergroup has the Authorize or the Search&Authorize permissions. No other SPS privilege is required to access this page. |
Select the connection and click Accept to enable the connection, Reject to deny the connection, or Accept&Follow to enable it and monitor in real-time.
|
NOTE:
Following a session requires the following:
The Safeguard Desktop Player application replays the live streams in live mode. For details on how to monitor a connection in real-time using the Safeguard Desktop Player, see "Replay audit files in follow mode" in the Safeguard Desktop Player User Guide. |
Enter a note why the connection was accepted/rejected into the appearing dialog box. This description will be stored in the connection database together with other metadata about the connection.
Figure 253: Describing why a connection was accepted/rejected
If you have to terminate an ongoing connection for some reason, select Active Connections from the main menu. The list of ongoing connections will be displayed.
Figure 254: Active Connections — Displaying active connections
Select the connection to stop, and click Terminate.
|
NOTE:
When following a connection in the Safeguard Desktop Player application, the auditor can also terminate the connection from the Audit Player by clicking Terminate. |
Figure 255: Terminating a connection in Safeguard Desktop Player
Credential Stores offer a way to store user credentials (for example, passwords, private keys, certificates) and use them to log in to the target server, without the user having access to the credentials. That way, the users only have to perform gateway authentication on One Identity Safeguard for Privileged Sessions (SPS) with their usual password (or to an LDAP database), and if the user is allowed to access the target server, SPS automatically logs in using the Credential Store. For details on gateway authentication, see Configuring gateway authentication.
|
NOTE:
Keyboard-interactive authentication is not supported when using credential stores. |
Figure 256: Authenticating using Credential Stores
Credential Stores can be stored locally on SPS, or on a remote device. For remote Credential Stores, SPS integrates with external authentication and authorization systems using plugins.
To configure a local Credential Store, see Configuring local Credential Stores.
To configure a local, password-protected Credential Store, see Configuring password-protected Credential Stores.
To unlock a local, password-protected Credential Store, see Unlocking Credential Stores.
To configure a custom Credential Store plugin, see Using a custom Credential Store plugin to authenticate on the target hosts.
|
NOTE:
After performing a successful gateway authentication, if the credential store does not contain a password for the user, the user is prompted for the server-side password as a fallback. In case of authenticating to RDP servers using Network Level Authentication (NLA), the server-side password is prompted at the start of the connection. If there is no password in the credential store for the user and the server-side password is incorrect, the connection is terminated. |
The following describes how to configure a local Credential Store that stores the credentials used to login to the target host.
|
NOTE:
Users accessing connections that use Credential Stores to authenticate on the target server must authenticate on One Identity Safeguard for Privileged Sessions (SPS) using gateway authentication or an AA plugin. Therefore gateway authentication or an AA plugin must be configured for these connections. For details, see "Configuring gateway authentication" in the Administration Guide and "Integrating external authentication and authorization systems" in the Administration Guide. |
To configure a local Credential Store that stores the credentials used to login to the target host
Navigate to Policies > Credential Stores.
Click and enter a name for the Credential Store.
Select Local.
Select Encryption key > Built-in. That way the credentials will be encrypted with a built-in password, and the Credential Store is automatically accessible when SPS boots up. To use custom passwords to encrypt the Credential Store, see Configuring password-protected Credential Stores.
Figure 257: Policies > Credential Stores > Local — Configuring local Credential Stores
Add credentials to the Credential Store.
Click and enter the destination host and the username. For the destination host, you can use hostname, IP address, or subnet as well. To use the same credentials for every destination host, enter the 0.0.0.0/0 subnet. To use the credentials only on the hosts of a specific domain, enter *.domain. Note that:
Usernames are case sensitive.
To authenticate users of a Windows domain, enter the name of the domain into the Host field.
Use an IPv4 address.
Set the credentials. SPS will use these credentials to login to the destination host if the credential store is selected in a Connection policy. If more than one credential is specified to a host-username pair, SPS will attempt to use the credentials as the destination host requests it.
To add a password, click Passwords > , then enter the password corresponding to the username.
To upload a private key, click SSH Keys > > , then paste or upload a private key.
|
NOTE:
If the private key is protected by a passphrase, enter the passphrase. The passphrase is needed only once during the upload, it is not required for the later operation of the Credential Store. |
To generate a keypair on SPS click SSH Keys > > , set the length and type of the key, then click Generate. After that, click the fingerprint of the key to download the public part of the keypair. There is no way to download the private key from the SPS web interface.
|
NOTE:
One Identity recommends using 2048-bit RSA keys (or stronger). |
To upload a certificate and the corresponding private key, click X509 Keys > > , then paste or upload a certificate and the private key.
|
NOTE:
If the private key is protected by a passphrase, enter the passphrase. The passphrase is needed only once during the upload, it is not required for the later operation of the Credential Store. |
|
NOTE:
One Identity Safeguard for Privileged Sessions (SPS) accepts passwords that are not longer than 150 characters. The following special characters can be used: !"#$%&'()*+,-./:;<=>?@[\]^-`{|} |
Repeat the previous step to add further credentials to the username as necessary.
Repeat the previous step to add further hosts or usernames as necessary.
|
NOTE:
Credential Stores can be used together with usermapping policies to simplify the administration of users on the target hosts. For details, see Configuring usermapping policies. |
Click .
Navigate to the Connection policy where you want to use the Credential Store (for example, to SSH Control > Connections), select the Credential Store to use in the Credential Store field, then click .
|
NOTE:
The Connection Policy will ignore the settings for server-side authentication (set under Relayed authentication methods) if a Credential Store is used in the Connection Policy. |
Figure 258: <Protocol name> Control > Connections — Select a Credential Store to use
The following describes how to perform a gateway authentication to RDP servers using local Credential Store and Network Level Authentication (NLA).
To perform a gateway authentication to RDP servers using local Credential Store and NLA
Initiate the RDP connection.
Enter your gateway credentials during the gateway authentication. This can be web gateway authentication, or inband gateway authentication using RD Gateway.
Enter the following:
In the Username field, enter the domain name, the -AUTO suffix, and your username. For example, EXAMPLEDOMAIN-AUTO\Administrator.
|
NOTE:
The -AUTO suffix is the default value of the RDP Control > Settings > Autologon domain suffix option of One Identity Safeguard for Privileged Sessions (SPS). If your SPS administrator has changed this option, use the appropriate suffix instead of -AUTO. |
Enter your username (only the username, without the domain, for example, Administrator) into the Password field.
If the authentication is successful, the desktop of the remote server is displayed.
© 2024 One Identity LLC. ALL RIGHTS RESERVED. Feedback Terms of Use Privacy Cookie Preference Center