サポートと今すぐチャット
サポートとのチャット

Identity Manager 9.1 - Attestation Administration Guide

Attestation and recertification
One Identity Manager users for attestation Attestation base data Attestation types Attestation procedure Attestation schedules Compliance frameworks Chief approval team Attestation policy owners Standard reasons for attestation Attestation policies Sample attestation Grouping attestation policies Custom mail templates for notifications Suspending attestation
Approval processes for attestation cases
Approval policies for attestations Approval workflow for attestations Selecting attestors Setting up multi-factor authentication for attestation Prevent attestation by employee awaiting attestation Phases of attestation Attestation by peer group analysis Managing attestation cases
Attestation sequence Default attestation and withdrawal of entitlements User attestation and recertification Certifying new roles and organizations Mitigating controls Setting up attestation in a separate database Configuration parameters for attestation

Disabling adaptive cards

Adaptive cards that are not used can be disabled.

To disable an adaptive card

  1. In the Manager, select the Attestation > Basic configuration data > Adaptive cards category.

  2. Select the adaptive card in the result list.

  3. Select the Change main data task.

  4. Set Disabled.

  5. Save the changes.
Related topics

Default attestation and withdrawal of entitlements

One Identity Manager provide various default attestation procedures for different data situations and default attestation procedures.

Data situations for default attestations:

  • System entitlements owned by an employee

  • System entitlements assigned to system entitlements

  • System entitlements assigned to hierarchical roles

  • System roles assigned to an employee

  • Company resources assigned to system roles

  • System roles assigned to hierarchical roles

  • Business and application role memberships

  • Employee main data of a new One Identity Manager user

  • Employee main data of an existing One Identity Manager user

The attestation polices required for attesting employee main data are also supplied by default. You can also use the default supplied attestation policies without modifying them. The prerequisites and the attestation sequence for employee data are described in User attestation and recertification.

You can set up attestation policies easily in the Web Portal using default attestation procedures for other data situations. You can also use the default attestation policies supplied without customizing them. Furthermore, you can configure how to deal with denied attestations that are based on these default attestation procedures. If your specific data situation allows, denied entitlements can be withdrawn by One Identity Manager following the attestation.

To withdraw denied entitlements automatically

  1. In the Designer, set the QER | Attestation | AutoRemovalScope configuration parameter and the configuration subparameters.

  2. If the entitlements were obtained through IT Shop, specify whether these requests should be unsubscribed or canceled. To do this, set the QER | Attestation | AutoRemovalScope | PWOMethodName configuration parameter and select a value.

    • Abort: Requests are canceled. In this case, they do not go through a cancellation workflow. The requested entitlements are withdrawn without additional checks.

    • Unsubscribe: Requests are unsubscribed. They go through the cancellation workflow defined in the approval policies. Withdrawal of the entitlement can thus be subjected to an additional check.

      If the cancellation is denied, the entitlement is not withdrawn even though the attestation has been denied.

    If the configuration parameter is not set, the requests are canceled.

IMPORTANT: If role memberships or system roles are withdrawn from an employee they lose the unapproved entitlement. They also lose all other company resources inherited through this role. These may be other system entitlements or account definitions. If necessary, system entitlements are withdrawn and company resources are deleted from the employee.

Check whether your data situation allows automatic withdrawal of entitlements before you enable configuration parameters under QER | Attestation | AutoRemovalScope.

Automatic removal of entitlements is triggered by an additional approval step with the EX approval procedure in the default approval workflows.

Attestation sequence with subsequence withdrawal of denied entitlements:

  1. Attestation is carried out using a default attestation procedure.

  2. The attestor denies attestation. The approval step is not granted approval and approval is passed on the next approval level with the EX approval procedure.

  3. The approval step triggers the AUTOREMOVE event. This runs the VI_Attestation_AttestationCase_AutoRemoveMembership process.

  4. The process runs the VI_AttestationCase_RemoveMembership script. This removes the affected entitlement depending on which configuration parameters are set.

  5. The script sets the approval step status to Denied. This means the entire attestation case is finally denied.

  6. Tasks to recalculate inheritance are entered in the DBQueue.

Detailed information about this topic

Attesting system entitlements

Installed modules: Target System Base Module

If you attest memberships in system entitlements, you can use the QER | Attestation | AutoRemovalScope | GroupMembership configuration parameter to configure automatic removal of system entitlements. After attestation approval has been denied, One Identity Manager checks which type of assignment was used for the user account to become a member in the system entitlement.

Table 42: Effect of configuration parameters when attestation denied

Configuration parameter

Effect when set

QER | Attestation | AutoRemovalScope | GroupMembership | RemoveDirect

Direct membership of the user account in the system entitlement, is removed.

QER | Attestation | AutoRemovalScope | GroupMembership | RemovePrimaryRole

If membership in the system entitlement was inherited through a primary role, the role is withdrawn from the employee.

This removes all indirect assignments obtained by the employee through this role.

QER | Attestation | AutoRemovalScope | GroupMembership | RemoveRequestedRole

If membership of the system entitlement was inherited through a requested role, the role request is canceled or unsubscribed.

This removes all indirect assignments obtained by the employee through this role.

Set the desired behavior in the QER | Attestation | AutoRemovalScope | PWOMethodName configuration parameter. For more information, see Default attestation and withdrawal of entitlements.

QER | Attestation | AutoRemovalScope | GroupMembership | RemoveDelegatedRole

If membership in the system entitlement was inherited through a delegated role, delegation of this role is canceled or unsubscribed.

This removes all indirect assignments obtained by the employee through this role.

Set the desired behavior in the QER | Attestation | AutoRemovalScope | PWOMethodName configuration parameter. For more information, see Default attestation and withdrawal of entitlements.

QER | Attestation | AutoRemovalScope | GroupMembership | RemoveRequested

If membership of the system entitlement was requested through the IT Shop, the request is canceled or unsubscribed.

Set the desired behavior in the QER | Attestation | AutoRemovalScope | PWOMethodName configuration parameter. For more information, see Default attestation and withdrawal of entitlements.

QER | Attestation | AutoRemovalScope | GroupMembership | RemoveSystemRole

System roles incorporating the system entitlements are withdrawn from the employee.

This removes all indirect assignments obtained by the employee through this system role.

This configuration parameter is only available if the System Roles Module is installed.

QER | Attestation | AutoRemovalScope | GroupMembership | RemoveDirectRole

If membership in the system entitlement was inherited through a secondary role (organization or business role), the employee's membership is removed from this role.

This removes all indirect assignments obtained by the employee through this role.

QER | Attestation | AutoRemovalScope | GroupMembership | RemoveDynamicRole

If membership in the system entitlement was inherited through a dynamic role, the employee is excluded from the dynamic role.

This removes all indirect assignments obtained by the employee through this role.

If you attest assignments to system entitlements, you can use the QER | Attestation | AutoRemovalScope | UNSGroupInUNSGroup configuration parameter to configure automatic removal of system entitlements.

Table 43: Effect of configuration parameters when attestation denied

Configuration parameter

Effect when set

QER | Attestation | AutoRemovalScope | UNSGroupInUNSGroup | RemoveDirect

Assignment of the system entitlement to a system entitlement is removed.

If you attest system entitlement assignments to hierarchical roles, you can use the following configuration parameters to configure automatic removal of system entitlements.

Table 44: Effect of configuration parameters when attestation denied

Configuration parameter

Effect when set

QER | Attestation | AutoRemovalScope | DepartmentHasUNSGroup | RemoveDirect

The assignment of the system entitlement to a department is removed.

Therefore the system entitlement is removed from all employees that inherit assignments from this department.

QER | Attestation | AutoRemovalScope | ProfitCenterHasUNSGroup | RemoveDirect

The assignment of the system entitlement to a cost center is removed.

Therefore the system entitlement is removed from all employees that inherit assignments from this cost center.

QER | Attestation | AutoRemovalScope | LocalityHasUNSGroup | RemoveDirect

The assignment of the system entitlement to a location is removed.

Therefore the system entitlement is removed from all employees that inherit assignments from this location.

QER | Attestation | AutoRemovalScope | OrgHasUNSGroup | RemoveDirect

The assignment of a system entitlement to a business role is removed.

Therefore the system entitlement is removed from all employees that inherit assignments from this business role.

System role attestation

Installed modules: System Roles Module

If you attest memberships in system roles, you can use the QER | Attestation | AutoRemovalScope | ESetAssignment configuration parameter to configure the automatic removal of system roles. After attestation approval has been denied, One Identity Manager checks which type of assignment was used for the user account to become a member in the system role.

Table 45: Effect of configuration parameters when attestation denied

Configuration parameter

Effect when set

QER | Attestation | AutoRemovalScope | ESetAssignment | RemoveDirect

Direct membership in the system role is removed.

This removes all indirect assignments obtained by the employee through this system role.

QER | Attestation | AutoRemovalScope | ESetAssignment | RemovePrimaryRole

If the system role was inherited through a primary role, the role is withdrawn.

This removes all indirect assignments obtained by the employee through this role.

QER | Attestation | AutoRemovalScope | ESetAssignment | RemoveRequestedRole

If the system role was inherited through a requested role, the role request is canceled or unsubscribed.

This removes all indirect assignments obtained by the employee through this role.

Set the desired behavior in the QER | Attestation | AutoRemovalScope | PWOMethodName configuration parameter. For more information, see Default attestation and withdrawal of entitlements.

QER | Attestation | AutoRemovalScope | ESetAssignment | RemoveDelegatedRole

If the system role was inherited through a delegated role, the delegation of this role is canceled or unsubscribed.

This removes all indirect assignments obtained by the employee through this role.

Set the desired behavior in the QER | Attestation | AutoRemovalScope | PWOMethodName configuration parameter. For more information, see Default attestation and withdrawal of entitlements.

QER | Attestation | AutoRemovalScope | ESetAssignment | RemoveRequested

If the system role was requested through the IT Shop, the request is canceled or unsubscribed.

This removes all indirect assignments obtained by the employee through this system role.

Set the desired behavior in the QER | Attestation | AutoRemovalScope | PWOMethodName configuration parameter. For more information, see Default attestation and withdrawal of entitlements.

QER | Attestation | AutoRemovalScope | ESetAssignment | RemoveDirectRole

If the system role was inherited through a secondary role (organization or business role), the employee's membership is removed from this role.

This removes all indirect assignments obtained by the employee through this role.

QER | Attestation | AutoRemovalScope | ESetAssignment | RemoveDynamicRole

If the system role was inherited through a dynamic role, the employee is excluded from the dynamic role.

This removes all indirect assignments obtained by the employee through this role.

If you attest assignments to system roles, you can use the QER | Attestation | AutoRemovalScope | ESetHasEntitlement configuration parameter to configure automatic removal of assignments.

Table 46: Effect of configuration parameters when attestation denied

Configuration parameter

Effect when set

QER | Attestation | AutoRemovalScope | ESetHasEntitlement | RemoveDirect

Assignment of the company resource to a system role is removed.

If you attest system role assignments to hierarchical roles, you can use the following configuration parameters to configure automatic removal of system roles.

Table 47: Effect of configuration parameters when attestation denied

Configuration parameter

Effect when set

QER | Attestation | AutoRemovalScope | DepartmentHasESet | RemoveDirect

The assignment of the system role to a department is removed.

Therefore the system role is removed from all employees that inherit assignments from this department.

QER | Attestation | AutoRemovalScope | ProfitCenterHasESet | RemoveDirect

The assignment of the system role to a cost center is removed.

Therefore the system role is removed from all employees that inherit assignments from this cost center.

QER | Attestation | AutoRemovalScope | LocalityHasESet | RemoveDirect

The assignment of the system role to a location is removed.

Therefore the system role is removed from all employees that inherit assignments from this location.

QER | Attestation | AutoRemovalScope | OrgHasESet | RemoveDirect

The assignment of the system role to a business role is removed.

Therefore the system role is removed from all employees that inherit assignments from this business role.

関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択