Chat now with support
Chat with Support

syslog-ng Open Source Edition 3.38 - Administration Guide

Preface Introduction to syslog-ng The concepts of syslog-ng Installing syslog-ng The syslog-ng OSE quick-start guide The syslog-ng OSE configuration file source: Read, receive, and collect log messages
How sources work default-network-drivers: Receive and parse common syslog messages internal: Collecting internal messages file: Collecting messages from text files wildcard-file: Collecting messages from multiple text files kubernetes: Collecting and parsing the Kubernetes CRI (Container Runtime Interface) format linux-audit: Collecting messages from Linux audit logs mqtt: receiving messages from an MQTT broker network: Collecting messages using the RFC3164 protocol (network() driver) nodejs: Receiving JSON messages from nodejs applications mbox: Converting local email messages to log messages osquery: Collect and parse osquery result logs pipe: Collecting messages from named pipes pacct: Collecting process accounting logs on Linux program: Receiving messages from external applications python: writing server-style Python sources python-fetcher: writing fetcher-style Python sources snmptrap: Read Net-SNMP traps sun-streams: Collecting messages on Sun Solaris syslog: Collecting messages using the IETF syslog protocol (syslog() driver) system: Collecting the system-specific log messages of a platform systemd-journal: Collecting messages from the systemd-journal system log storage systemd-syslog: Collecting systemd messages using a socket tcp, tcp6, udp, udp6: Collecting messages from remote hosts using the BSD syslog protocol— OBSOLETE unix-stream, unix-dgram: Collecting messages from UNIX domain sockets stdin: Collecting messages from the standard input stream
destination: Forward, send, and store log messages
amqp: Publishing messages using AMQP collectd: sending metrics to collectd discord: Sending alerts and notifications to Discord elasticsearch2: Sending messages directly to Elasticsearch version 2.0 or higher (DEPRECATED) elasticsearch-http: Sending messages to Elasticsearch HTTP Bulk API file: Storing messages in plain-text files graphite: Sending metrics to Graphite Sending logs to Graylog hdfs: Storing messages on the Hadoop Distributed File System (HDFS) Posting messages over HTTP http: Posting messages over HTTP without Java kafka: Publishing messages to Apache Kafka (Java implementation) kafka-c(): Publishing messages to Apache Kafka using the librdkafka client (C implementation) loggly: Using Loggly logmatic: Using Logmatic.io mongodb(): Storing messages in a MongoDB database mqtt() destination: sending messages from a local network to an MQTT broker network: Sending messages to a remote log server using the RFC3164 protocol (network() driver) osquery: Sending log messages to osquery's syslog table pipe: Sending messages to named pipes program: Sending messages to external applications pseudofile() python: writing custom Python destinations redis: Storing name-value pairs in Redis riemann: Monitoring your data with Riemann slack: Sending alerts and notifications to a Slack channel smtp: Generating SMTP messages (email) from logs snmp: Sending SNMP traps Splunk: Sending log messages to Splunk sql: Storing messages in an SQL database stomp: Publishing messages using STOMP Sumo Logic destinations: sumologic-http() and sumologic-syslog() syslog: Sending messages to a remote logserver using the IETF-syslog protocol syslog-ng(): Forward logs to another syslog-ng node tcp, tcp6, udp, udp6: Sending messages to a remote log server using the legacy BSD-syslog protocol (tcp(), udp() drivers) Telegram: Sending messages to Telegram unix-stream, unix-dgram: Sending messages to UNIX domain sockets usertty: Sending messages to a user terminal: usertty() destination Write your own custom destination in Java or Python Client-side failover
log: Filter and route log messages using log paths, flags, and filters Global options of syslog-ng OSE TLS-encrypted message transfer template and rewrite: Format, modify, and manipulate log messages parser: Parse and segment structured messages
Parsing syslog messages Parsing messages with comma-separated and similar values Parsing key=value pairs JSON parser XML parser Parsing dates and timestamps Python parser Parsing tags Apache access log parser Linux audit parser Cisco parser Parsing enterprise-wide message model (EWMM) messages iptables parser Netskope parser panos-parser(): parsing PAN-OS log messages Sudo parser MariaDB parser Websense parser Fortigate parser Check Point Log Exporter parser Regular expression (regexp) parser db-parser: Process message content with a pattern database (patterndb)
Correlating log messages Enriching log messages with external data Statistics of syslog-ng Multithreading and scaling in syslog-ng OSE Troubleshooting syslog-ng Best practices and examples The syslog-ng manual pages Creative Commons Attribution Non-commercial No Derivatives (by-nc-nd) License The syslog-ng Open Source Edition Documentation License Glossary

Proxy Protocol: configuration and output examples

This section provides information about enabling Proxy Protocol support in your network() source options, and an example configuration and output to illustrate how the Proxy Protocol method works in syslog-ng Open Source Edition (syslog-ng OSE).

For more information about the working mechanism of the Proxy Protocol, see The working mechanism behind the Proxy Protocol.

Enabling Proxy Protocol support for your network() source options

Unless you enable Proxy Protocol support for your network() source, syslog-ng OSE identifies every connection that is connected to the load balancers identically by default, regardless of the source IP or the source protocol.

To enable Proxy Protocol for your network() source, set the transport() parameter of your network() source to proxied-tcp or proxied-tls-passthrough, depending on your preference and configuration.

proxied-tls can be used in complex MITM (man in the middle) configurations, where the proxy header is sent encrypted within the same TLS session as the proxied messages.

When you enable Proxy Protocol support for your network() source, you can use the following configuration example with your syslog-ng OSE application.

Configuration

The following code sample illustrates how you can use the Proxy Protocol in your syslog-ng OSE configuration (using the transport() parameter set to proxied-tls-passthrough).

@version: 3.35

source s_tcp_pp {
  network (
    port(6666)
    transport("proxied-tls-passthrough")
    tls(
        key-file("/certs/certs/server/server.rsa")
        cert-file("/certs/certs/server/server.crt")
        ca-dir("/certs/certs/CA")
        peer-verify("required-trusted")
    )
  );
};

destination d_file {
  file("/var/log/proxy-proto.log" template("$(format-json --scope nv-pairs)\n"));
};

log {
  source(s_tcp_pp);
  destination(d_file);
};

With this configuration, the Proxy Protocol method will perform injecting the information of the original connection into the forwarded TCP session, based on the working mechanism described in The working mechanism behind the Proxy Protocol.

The following example illustrates how the parsed macros will appear in the output.

Example: Output for the PROXY TCP4 192.168.1.1 10.10.0.1 1111 2222 input header

With the PROXY TCP4 192.168.1.1 10.10.0.1 1111 2222 input header, the output looks like this:

{"SOURCE":"s_tcp_pp","PROXIED_SRCPORT":"1111","PROXIED_SRCIP":"192.168.1.1","PROXIED_IP_VERSION":"4","PROXIED_DSTPORT":"2222","PROXIED_DSTIP":"10.10.0.1","PROGRAM":"TestMsg","MESSAGE":"","LEGACY_MSGHDR":"TestMsg","HOST_FROM":"localhost","HOST":"localhost"}

Note that the macros that syslog-ng OSE adds to the message appear in the output.

nodejs: Receiving JSON messages from nodejs applications

Using the nodejs() driver, syslog-ng OSE can receive application logs directly from nodejs applications that use the widespread Winston logging API. The syslog-ng OSE application automatically adds the .nodejs.winston. prefix to the name of the fields the extracted from the message.

To use the nodejs() driver, the scl.conf file must be included in your syslog-ng OSE configuration:

@include "scl.conf"

The nodejs() driver is actually a reusable configuration snippet configured to receive log messages using the network() driver, and process its JSON contents. For details on using or writing such configuration snippets, see Reusing configuration blocks. You can find the source of the nodejs configuration snippet on GitHub.

Example: Using the nodejs() driver

The following example uses the default settings of the driver, listening for messages on port 9003 of every IP address of the syslog-ng OSE host.

@include "scl.conf"
source apps { nodejs(); };

The following example listens only on IP address 192.168.1.1, port 9999.

@include "scl.conf"
source apps {
    nodejs(
        localip(192.168.1.1)
        port(9999)
    )
};

NOTE: For details on the parameters of the nodejs() driver, see nodejs() source options.

nodejs() source options

The nodejs() driver has the following options.

hook-commands()

Description: This option makes it possible to execute external programs when the relevant driver is initialized or torn down. The hook-commands() can be used with all source and destination drivers with the exception of the usertty() and internal() drivers.

NOTE: The syslog-ng OSE application must be able to start and restart the external program, and have the necessary permissions to do so. For example, if your host is running AppArmor or SELinux, you might have to modify your AppArmor or SELinux configuration to enable syslog-ng OSE to execute external applications.

Using the hook-commands() when syslog-ng OSE starts or stops

To execute an external program when syslog-ng OSE starts or stops, use the following options:

startup()
Type: string
Default: N/A

Description: Defines the external program that is executed as syslog-ng OSE starts.

shutdown()
Type: string
Default: N/A

Description: Defines the external program that is executed as syslog-ng OSE stops.

Using the hook-commands() when syslog-ng OSE reloads

To execute an external program when the syslog-ng OSE configuration is initiated or torn down, for example, on startup/shutdown or during a syslog-ng OSE reload, use the following options:

setup()
Type: string
Default: N/A

Description: Defines an external program that is executed when the syslog-ng OSE configuration is initiated, for example, on startup or during a syslog-ng OSE reload.

teardown()
Type: string
Default: N/A

Description: Defines an external program that is executed when the syslog-ng OSE configuration is stopped or torn down, for example, on shutdown or during a syslog-ng OSE reload.

Example: Using the hook-commands() with a network source

In the following example, the hook-commands() is used with the network() driver and it opens an iptables port automatically as syslog-ng OSE is started/stopped.

The assumption in this example is that the LOGCHAIN chain is part of a larger ruleset that routes traffic to it. Whenever the syslog-ng OSE created rule is there, packets can flow, otherwise the port is closed.

source {
   network(transport(udp)
	hook-commands(
          startup("iptables -I LOGCHAIN 1 -p udp --dport 514 -j ACCEPT")
          shutdown("iptables -D LOGCHAIN 1")
        )
     );
};
ip() or localip()
Type: string
Default: 0.0.0.0

Description: The IP address to bind to. By default, syslog-ng OSE listens on every available interface. Note that this is not the address where messages are accepted from.

If you specify a multicast bind address and use the udp transport, syslog-ng OSE automatically joins the necessary multicast group. TCP does not support multicasting.

port() or localport()
Type: number
Default: 9003

Description: The port number to bind to.

mbox: Converting local email messages to log messages

Using the mbox() driver, syslog-ng OSE can read email messages from local mbox files, and convert them to multiline log messages.

This driver has only one required option, the filename of the mbox file. To use the mbox() driver, the scl.conf file must be included in your syslog-ng OSE configuration:

@include "scl.conf"

The mbox() driver is actually a reusable configuration snippet configured to read log messages using the file() driver. For details on using or writing such configuration snippets, see Reusing configuration blocks. You can find the source of the configuration snippet on GitHub.

Example: Using the mbox() driver

The following example reads the emails of the root user on the syslog-ng OSE host.

@include "scl.conf"
source root-mbox {
    mbox("/var/spool/mail/root");
};
Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating