立即与支持人员聊天
与支持团队交流

syslog-ng Premium Edition 7.0.32 - Administration Guide

Preface Introduction to syslog-ng The concepts of syslog-ng Installing syslog-ng PE The syslog-ng PE quick-start guide The syslog-ng PE configuration file Collecting log messages — sources and source drivers
How sources work default-network-drivers: Receive and parse common syslog messages internal: Collecting internal messages file: Collecting messages from text files google-pubsub: collecting messages from the Google Pub/Sub messaging service wildcard-file: Collecting messages from multiple text files linux-audit: Collecting messages from Linux audit logs mssql, oracle, sql: collecting messages from an SQL database network: Collecting messages using the RFC3164 protocol (network() driver) office365: Fetching logs from Office 365 osquery: Collect and parse osquery result logs pipe: Collecting messages from named pipes program: Receiving messages from external applications python: writing server-style Python sources python-fetcher: writing fetcher-style Python sources snmptrap: Read Net-SNMP traps syslog: Collecting messages using the IETF syslog protocol (syslog() driver) system: Collecting the system-specific log messages of a platform systemd-journal: Collecting messages from the systemd-journal system log storage systemd-syslog: Collecting systemd messages using a socket tcp, tcp6,udp, udp6: Collecting messages from remote hosts using the BSD syslog protocol udp-balancer: Receiving UDP messages at very high rate unix-stream, unix-dgram: Collecting messages from UNIX domain sockets windowsevent: Collecting Windows event logs
Sending and storing log messages — destinations and destination drivers
elasticsearch2>: Sending messages directly to Elasticsearch version 2.0 or higher (DEPRECATED) elasticsearch-http: Sending messages to Elasticsearch HTTP Event Collector file: Storing messages in plain-text files google_pubsub(): Sending logs to the Google Cloud Pub/Sub messaging service google_pubsub-managedaccount(): Sending logs to the Google Cloud Pub/Sub messaging service authenticated by Google Cloud managed service account hdfs: Storing messages on the Hadoop Distributed File System (HDFS) http: Posting messages over HTTP kafka(): Publishing messages to Apache Kafka (Java implementation) (DEPRECATED) kafka-c(): Publishing messages to Apache Kafka using the librdkafka client (C implementation) logstore: Storing messages in encrypted files mongodb: Storing messages in a MongoDB database network: Sending messages to a remote log server using the RFC3164 protocol (network() driver) pipe: Sending messages to named pipes program: Sending messages to external applications python: writing custom Python destinations sentinel(): Sending logs to the Microsoft Azure Sentinel cloud snmp: Sending SNMP traps smtp: Generating SMTP messages (email) from logs splunk-hec: Sending messages to Splunk HTTP Event Collector sql(): Storing messages in an SQL database stackdriver: Sending logs to the Google Stackdriver cloud syslog: Sending messages to a remote logserver using the IETF-syslog protocol syslog-ng(): Forward logs to another syslog-ng node tcp, tcp6, udp, udp6: Sending messages to a remote log server using the legacy BSD-syslog protocol (tcp(), udp() drivers) unix-stream, unix-dgram: Sending messages to UNIX domain sockets usertty: Sending messages to a user terminal — usertty() destination Client-side failover
Routing messages: log paths, flags, and filters Global options of syslog-ng PE TLS-encrypted message transfer Advanced Log Transport Protocol Reliability and minimizing the loss of log messages Manipulating messages parser: Parse and segment structured messages Processing message content with a pattern database Correlating log messages Enriching log messages with external data Monitoring statistics and metrics of syslog-ng Multithreading and scaling in syslog-ng PE Troubleshooting syslog-ng Best practices and examples The syslog-ng manual pages Glossary

Enterprise-wide message model (EWMM)

The following section describes the structure of log messages using the Enterprise-wide message model or EWMM message format.

The Enterprise-wide message model or EWMM allows you to deliver structured messages from the initial receiving syslog-ng component right up to the central log server, through any number of hops. It does not matter if you parse the messages on the client, on a relay, or on the central server, their structured results will be available where you store the messages. Optionally, you can also forward the original raw message as the first syslog-ng component in your infrastructure has received it, which is important if you want to forward a message for example, to a SIEM system. To make use of the enterprise-wide message model, you have to use the syslog-ng() destination on the sender side, and the default-network-drivers() source on the receiver side.

The following is a sample log message in EWMM format.

<13>1 2018-05-13T13:27:50.993+00:00 my-host @syslog-ng - - -
{"MESSAGE":"<34>Oct 11 22:14:15 mymachine su: 'su root' failed for username on
/dev/pts/8","HOST_FROM":"my-host","HOST":"my-host","FILE_NAME":"/tmp/in","._TAGS":".source.s_file"}

The message has the following parts:

  • The header of the complies with the RFC5424 message format, where the PROGRAM field is set to @syslog-ng, and the SDATA field is empty.

  • The MESSAGE part is in JSON format, and contains the actual message, as well as any name-value pairs that syslog-ng PE has attached to or extracted from the message. The ${._TAGS} field contains the identifier of the syslog-ng source that has originally received the message on the first syslog-ng node.

To send a message in EWMM format, you can use the syslog-ng() destination driver, or the format-ewmm() template function.

To receive a message in EWMM format, you can use the default-destination-drivers() source driver, or the ewmm-parser() parser.

Message representation in syslog-ng PE

When the syslog-ng PE application receives a message, it automatically parses the message. The syslog-ng PE application can automatically parse log messages that conform to the RFC3164 (BSD or legacy-syslog) or the RFC5424 (IETF-syslog) message formats. If syslog-ng PE cannot parse a message, it results in an error.

TIP: In case you need to relay messages that cannot be parsed without any modifications or changes, use the flags(no-parse) option in the source definition, and a template containing only the ${MSG} macro in the destination definition.

To parse non-syslog messages, for example, JSON, CSV, or other messages, you can use the built-in parsers of syslog-ng PE. For details, see parser: Parse and segment structured messages.

A parsed syslog message has the following parts:

  • Timestamps

    Two timestamps are associated with every message: one is the timestamp contained within the message (that is, when the sender sent the message), the other is the time when syslog-ng PE has actually received the message.

  • Severity

    The severity of the message.

  • Facility

    The facility that sent the message.

  • Tags

    Custom text labels added to the message that are mainly used for filtering. None of the current message transport protocols adds tags to the log messages. Tags can be added to the log message only within syslog-ng PE. The syslog-ng PE application automatically adds the id of the source as a tag to the incoming messages. Other tags can be added to the message by the pattern database, or using the tags() option of the source.

  • IP address of the sender

    The IP address of the host that sent the message. Note that the IP address of the sender is a hard macro and cannot be modified within syslog-ng PE but the associated hostname can be modified, for example, using rewrite rules.

  • Hard macros

    Hard macros contain data that is directly derived from the log message, for example, the ${MONTH} macro derives its value from the timestamp. The most important consideration with hard macros is that they are read-only, meaning they cannot be modified using rewrite rules or other means.

  • Soft macros

    Soft macros (sometimes also called name-value pairs) are either built-in macros automatically generated from the log message (for example, ${HOST}), or custom user-created macros generated by using the syslog-ng pattern database or a CSV-parser. The SDATA fields of RFC5424-formatted log messages become soft macros as well. In contrast with hard macros, soft macros are writable and can be modified within syslog-ng PE, for example, using rewrite rules.

    NOTE: It is also possible to set the value of built-in soft macros using parsers, for example, to set the ${HOST} macro from the message using a column of a CSV-parser.

    The data extracted from the log messages using named pattern parsers in the pattern database are also soft macros.

    TIP: For the list of hard and soft macros, see Hard versus soft macros.

Message size and encoding

Internally, syslog-ng PE represents every message as UTF-8. The maximal length of the log messages is limited by the log-msg-size() option: if a message is longer than this value, syslog-ng PE truncates the message at the location it reaches the log-msg-size() value, and discards the rest of the message.

When encoding is set in a source (using the encoding() option) and the message is longer (in bytes) than log-msg-size() in UTF-8 representation, syslog-ng PE splits the message at an undefined location (because the conversion between different encodings is not trivial).

Structuring macros, metadata, and other value-pairs

Available in syslog-ng PE 5.1 and later.

The syslog-ng PE application allows you to select and construct name-value pairs from any information already available about the log message, or extracted from the message itself. You can directly use this structured information, for example, in the following places:

When using value-pairs, there are three ways to specify which information (that is, macros or other name-value pairs) to include in the selection.

  • Select groups of macros using the scope() parameter, and optionally remove certain macros from the group using the exclude() parameter.

  • List specific macros to include using the key() parameter.

  • Define new name-value pairs to include using the pair() parameter.

These parameters are detailed in value-pairs().

Specifying data types in value-pairs

By default, syslog-ng PE handles every data as strings. However, certain destinations and data formats (for example, SQL, MongoDB, JSON) support other types of data as well, for example, numbers or dates. The syslog-ng PE application allows you to specify the data type in templates (this is also called type-hinting). If the destination driver supports data types, it converts the incoming data to the specified data type. For example, this allows you to store integer numbers as numbers in MongoDB, instead of strings.

Caution:

Hazard of data loss! If syslog-ng PE cannot convert the data into the specified type, an error occurs, and syslog-ng PE drops the message by default. To change how syslog-ng PE handles data-conversion errors, see on-error().

To use type-hinting, enclose the macro or template containing the data with the type: <datatype>("<macro>"), for example: int("$PID").

Currently the mongodb() destination and the format-json template function supports data types.

Example: Using type-hinting

The following example stores the MESSAGE, PID, DATE, and PROGRAM fields of a log message in a MongoDB database. The DATE and PID parts are stored as numbers instead of strings.

mongodb(
    value-pairs(
        pair("date", datetime("$UNIXTIME"))
        pair("pid", int64("$PID"))
        pair("program", "$PROGRAM"))
        pair("message", "$MESSAGE"))
    )
);

The following example formats the same fields into JSON.

$(format-json date=datetime("$UNIXTIME") pid=int64("$PID") program="$PROGRAM" message="$MESSAGE")

The syslog-ng PE application currently supports the following data-types.

  • boolean: Converts the data to a boolean value. Anything that begins with a t or 1 is converted to true, anything that begins with an f or 0 is converted to false.

  • datetime: Use it only with UNIX timestamps, anything else will likely result in an error. This means that currently you can use only the $UNIXTIME macro for this purpose.

  • double: A floating-point number.

  • literal: The data as a literal string, without adding any quotes or escape characters.

  • int or int32: 32-bit integer.

  • int64: 64-bit integer.

  • string: The data as a string.

value-pairs()

Type: parameter list of the value-pairs() option
Default:
empty string

Description: The value-pairs() option allows you to select specific information about a message easily using predefined macro groups. The selected information is represented as name-value pairs and can be used formatted to JSON format, or directly used in a mongodb() destination.

Example: Using the value-pairs() option

The following example selects every available information about the log message, except for the date-related macros (R_* and S_*), selects the .SDATA.meta.sequenceId macro, and defines a new value-pair called MSGHDR that contains the program name and PID of the application that sent the log message.

value-pairs(
    scope(nv_pairs core syslog all_macros selected_macros everything)
    exclude("R_*")
    exclude("S_*")
    key(".SDATA.meta.sequenceId")
    pair("MSGHDR" "$PROGRAM[$PID]: ")
)

The following example selects the same information as the previous example, but converts it into JSON format.

$(format-json --scope nv_pairs,core,syslog,all_macros,selected_macros,everything \
  --exclude R_* --exclude S_* --key .SDATA.meta.sequenceId \
  --pair MSGHDR="$PROGRAM[$PID]: ")

NOTE: Every macro is included in the selection only once, but redundant information may appear if multiple macros include the same information (for example, including several date-related macros in the selection).

The value-pairs() option has the following parameters. The parameters are evaluated in the following order:

  1. scope()

  2. exclude()

  3. key()

  4. pair()

exclude()

 

Type: Space-separated list of macros to remove from the selection created using the scope() option.
Default: empty string

Description: This option removes the specified macros from the selection. Use it to remove unneeded macros selected using the scope() parameter.

For example, the following example removes the SDATA macros from the selection.

value-pairs(
    scope(rfc5424 selected_macros)
    exclude(".SDATA*")
)

The name of the macro to remove can include wildcards (*, ?). Regular expressions are not supported.

key()

 

Type: Space-separated list of macros to be included in selection
Default: empty string

Description: This option selects the specified macros. The selected macros will be included as MACRONAME = MACROVALUE, that is using key("HOST") will result in HOST = $HOST. You can use wildcards (*, ?) to select multiple macros. For example:

value-pairs(
    scope(rfc3164)
    key("HOST")
)
value-pairs(
    scope(rfc3164)
    key("HOST", "PROGRAM")
)

 

omit-empty-values()

 

Type: flag
Default: N/A

Description: If this option is specified, syslog-ng PE does not include value-pairs with empty values in the output. For example: $(format-json --scope none --omit-empty-values) or

value-pairs(
    scope(rfc3164 selected-macros)
    omit-empty-values()
)

Available in syslog-ng PE version 7.0.14 and later.

 

pair()

 

Type: name value pairs in "<NAME>" "<VALUE>" format
Default: empty string

Description: This option defines a new name-value pair to be included in the message. The value part can include macros, templates, and template functions as well. For example:

 

The following sample selects every value-pair that begins with .cee., deletes this prefix by cutting 4 characters from the names, and adds a new prefix (events.).

value-pairs(
    key(".cee.*"
        rekey(
            shift(4)
            add-prefix("events.")
        )
    )
)

The rekey() option can be used with the format-json template-function as well, using the following syntax:

$(format-json --rekey .cee.* --add-prefix events.)

 

rekey()

 

Type: <pattern-to-select-names>, <list of transformations>
Default: empty string

Description: This option allows you to manipulate and modify the name of the value-pairs. You can define transformations, which are are applied to the selected name-value pairs. The first parameter of the rekey() option is a glob pattern that selects the name-value pairs to modify. If you omit the pattern, the transformations are applied to every key of the scope. For details on globs, see glob.

  • If rekey() is used within a key() option, the name-value pairs specified in the glob of the key() option are transformed.

  • If rekey() is used outside the key() option, every name-value pair of the scope() is transformed.

The following transformations are available:

  • add-prefix("<my-prefix>")
  • Adds the specified prefix to every name. For example, rekey( add-prefix("my-prefix."))

  • replace-prefix("<prefix-to-replace>", "<new-prefix>")
  • Replaces a substring at the beginning of the key with another string. Only prefixes can be replaced. For example, replace-prefix(".class", ",patterndb") changes the beginning tag .class to .patterndb

  • shift("<number>")
  • Cuts the specified number of characters from the beginning of the name.

Example:
Table 5: Using the rekey() option
scope()

Type: space-separated list of macro groups to include in selection
Default: empty string

Description: This option selects predefined groups of macros. The following groups are available:

  • nv-pairs: Every soft macro (name-value pair) associated with the message, except the ones that start with a dot (.) character. Macros starting with a dot character are generated within syslog-ng PE and are not originally part of the message, therefore are not included in this group.

  • dot-nv-pairs: Every soft macro (name-value pair) associated with the message which starts with a dot (.) character. For example, .classifier.rule_id and .sdata.*. Macros starting with a dot character are generated within syslog-ng PE and are not originally part of the message.

  • all-nv-pairs: Include every soft macro (name-value pair). Equivalent to using both nv-pairs and dot-nv-pairs.

  • rfc3164: The macros that correspond to the RFC3164 (legacy or BSD-syslog) message format: $FACILITY, $PRIORITY, $HOST, $PROGRAM, $PID, $MESSAGE, and $DATE.

  • rfc5424: The macros that correspond to the RFC5424 (IETF-syslog) message format: $FACILITY, $PRIORITY, $HOST, $PROGRAM, $PID, $MESSAGE, $MSGID, $R_DATE, and the metadata from the structured-data (SDATA) part of RFC5424-formatted messages, that is, every macro that starts with .SDATA..

    The rfc5424 group also has the following alias: syslog-proto. Note that the value of $R_DATE will be listed under the DATE key.

    The rfc5424 group does not contain any metadata about the message, only information that was present in the original message. To include the most commonly used metadata (for example, the $SOURCEIP macro), use the selected-macros group instead.

  • all-macros: Include every hard macro. This group is mainly useful for debugging, as it contains redundant information (for example, the date-related macros include the date-related information several times in various formats).

  • selected-macros: Include the macros of the rfc3164 groups, and the most commonly used metadata about the log message: the $TAGS, $SOURCEIP, and $SEQNUM macros.

  • sdata: The metadata from the structured-data (SDATA) part of RFC5424-formatted messages, that is, every macro that starts with .SDATA.

  • everything: Include every hard and soft macros. This group is mainly useful for debugging, as it contains redundant information (for example, the date-related macros include the date-related information several times in various formats).

For example:

value-pairs(
    scope(rfc3164 selected-macros)
)
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级