The Safeguard for Privileged Passwords Appliance is built specifically for use only with the Safeguard for Privileged Passwords privileged management software that is already installed and ready for immediate use. It comes hardened to ensure the system is secure at the hardware, operating system, and software levels.
The following two tables list the One Identity Safeguard for Privileged Passwords 3000 Appliance and 2000 Appliance specifications and power requirements.
Table 2: 3000 Appliance: Feature specifications
| Processor |
Intel Xeon E3-1275v6 3.8 GHz |
| # of Processors |
1 |
| # of Cores per Processor |
4 cores (8 threads) |
| L2/L3 Cache |
8MB L3 Cache |
| Chipset |
Intel C236 Chipset |
| DIMMs |
Unbuffered ECC UDIMM DDR4 2400MHz |
| RAM |
32 GB |
| Internal HD Controller |
LSI MegaRAID SAS 9361-4i Single |
| Disk Hard Drive |
4 x Seagate 7E2000 2TB SAS 512E |
| Availability |
TPM 2.0, EEC Memory, Redundant PSU |
| I/O Slots |
x16 PCIe 3.0, x8 PCIe 3.0 |
| RAID |
RAID10 |
| NIC/LOM |
4 port - dual GbE LAN with Intel i210-AT |
| Power Supplies |
Redundant, 700W, Auto Ranging (100v~240V), ACPI compatible |
| Fans |
1 Supermicro SNK-P0046P and 2 Micron 16GB 2666MHz 2R ECC Unb Z01B Dual Label |
| Chassis |
1U Rack |
|
Dimensions
(HxWxD) |
43 x 437.0 x 597.0 (mm)
1.7 x 17.2 x 23.5 (in) |
| Weight |
Max: 37 lbs (16.78 Kg) |
Table 3: 2000 Appliance: Feature specifications
| Processor |
Intel Xeon E3-1275v5 3.60 GHz |
| # of Processors |
1 |
| # of Cores per Processor |
4 |
| L2/L3 Cache |
4 x 256KB L2, 8MB L3 SmartCache |
| Chipset |
Intel C236 Chipset |
| DIMMs |
DDR4-2400 ECC Unbuffered DIMMs |
| RAM |
32GB |
| Internal HD Controller |
LSI MegaRAID SAS 9391-4i 12Gbps SAS3 |
| Disk |
4 x Seagate EC2.5 1TB SAS 512e |
| Availability |
TPM 2.0, EEC Memory, Redundant PSU |
| I/O Slots |
x16 PCIe 3.0, x8 PCIe 3.0 |
| RAID |
RAID10 |
| NIC/LOM |
3 x Intel i210-AT GbE |
| Power Supplies |
Redundant, 700W, Auto Ranging (100v~240V), ACPI compatible |
| Fans |
4 x 40mm Counter-rotating, Non-hot-swappable |
| Chassis |
1U Rack |
|
Dimensions
(HxWxD) |
43 x 437.0 x 597.0 (mm)
1.7 x 17.2 x 23.5 (in) |
| Weight |
Max: 46 lbs (20.9 Kg) |
| Miscellaneous |
FIPS Compliant Chassis |
Table 4: 3000 Appliance and 2000 Appliance: Power requirements
| Input Voltage |
100-240 Vac |
| Frequency |
50-60Hz |
| Power Consumption (Watts) |
170.9 |
| BTU |
583 |
Safeguard for Privileged Passwords is also available as a virtual appliance and from the cloud.
For details see:
One Identity Safeguard for Privileged Passwords has several graphical user interfaces that allow you to manage access requests, approvals, and reviews for your managed accounts and systems:
- The Windows desktop client consists of an end-user view and administrator view. The fully featured desktop client exposes all of the functionality of Safeguard based on the role of the authenticated user.
- The web client is functionally similar to the desktop client end-user view and useful for requestors, reviewers, and approvers. Many administration functions are available as well.
- The web management console displays whenever you connect to the virtual appliance and is used for first time configuration.
When setting up a virtual environment, carefully consider the configuration aspects such as CPU, memory availability, I/O subsystem, and network infrastructure to ensure the virtual layer has the necessary resources available. See One Identity's Product Support Policies for more information on environment virtualization.
Ensure that your system meets the minimum hardware and software requirements for these clients.
If a Safeguard Sessions Appliance is joined to Safeguard for Privileged Passwords, session recording is handled via Safeguard for Privileged Session. The join is initiated from Safeguard for Privileged Sessions. For details about the join steps and issue resolution, see the One Identity Safeguard for Privileged Sessions Administration Guide.
Bandwidth
It is recommended that connection, including overhead, is faster than 10 megabits per second inter-site bandwidth with a one-way latency of less than 500 milliseconds. If you are using traffic shaping, you must allow sufficient bandwidth and priority to port 655 UDP/TCP in the shaping profile. These numbers are offered as a guideline only in that other factors could require additional network tuning. These factors include but are not limited to: jitter, packet loss, response time, usage, and network saturation. If there are any further questions, please check with your Network Administration team.
The desktop client is a native Windows application suitable for use on end-user machines. You install the desktop client by means of an MSI package that you can download from the appliance web client portal. You do not need administrator privileges to install One Identity Safeguard for Privileged Passwords.
NOTE: PuTTY is used to launch the SSH client for SSH session requests and is included in the install. The desktop client looks for any user-installed PuTTY in the following locations:
- Any reference to putty in the PATH environment variable
- c:/Program Files/Putty
- c:/Program Files(x86)/Putty
- c:/Putty
If PuTTY is not found, the desktop client uses the version of PuTTY that it installed at:
<user-home-dir>/AppData/Local/Safeguard/putty.
If the user later installs PuTTY in any of the locations above, the desktop client uses that version which ensures the user has the latest version of PuTTY.
Table 5: Desktop client requirements
| Technology |
Microsoft .NET Framework 4.6 (or later) |
| Windows platforms |
64-bit editions of:
- Windows 7
- Windows 8.1
- Windows 10
- Windows Server 2008 R2
- Windows Server 2012
- Windows Server 2012 R2
- Windows Server 2016
If the appliance setting, TLS 1.2 Only is enabled, (Administrative Tools | Settings | Appliance | Appliance Information), ensure the desktop client also has TLS 1.2 enabled. If the client has an earlier version of TLS enabled, you will be locked out of the client and will not be able to connect to Safeguard for Privileged Passwords.
Considerations:
- Internet Explorer security must be set to use TLS 1.0 or higher. Ensure the proper "Use TLS" setting is enabled on the Advanced tab of the Internet Options dialog (In Internet Explorer, go to Tools | Internet Options | Advanced tab).
- To use FIDO2 two-factor authentication, you will need a web browser that supports the WebAuthn standard.
|
|
Desktop Player |
See One Identity Safeguard for Privileged Sessions [version] Safeguard Desktop Player User Guide available at: One Identity Safeguard for Privileged Sessions - Technical Documentation, User Guide. |
