syslog-ng Premium Edition 7.0.31 - Administration Guide

@module mod-java @include "scl.conf" destination d_mapr { hdfs( client-lib-dir("/opt/syslog-ng/lib/syslog-ng/java-modules/:/opt/mapr/lib/") hdfs-uri("maprfs://10.140.32.80") hdfs-file("/user/log/logfile.txt") ); };

destination d_hdfs { hdfs( client-lib-dir("/hdfs-libs/lib") hdfs-uri("hdfs://hdp-kerberos.syslog-ng.example:8020") kerberos-keytab-file("/opt/syslog-ng/etc/hdfs.headless.keytab") kerberos-principal("hdfs-hdpkerberos@MYREALM") hdfs-file("/var/hdfs/test.log") ); };

The hdfs destination stores the log messages in files on the Hadoop Distributed File System (HDFS). The hdfs destination has the following options.

The following options are required: hdfs-file(), hdfs-uri(). Note that to use hdfs, you must add the following lines to the beginning of your syslog-ng PE configuration:

@module mod-java
@include "scl.conf"

client-lib-dir()

Type:	string
Default:	The syslog-ng PE module directory: /opt/syslog-ng/lib/syslog-ng/java-modules/

Description: The list of the paths where the required Java classes are located. For example, class-path("/opt/syslog-ng/lib/syslog-ng/java-modules/:/opt/my-java-libraries/libs/"). If you set this option multiple times in your syslog-ng PE configuration (for example, because you have multiple Java-based destinations), syslog-ng PE will merge every available paths to a single list.

For the hdfs destination, include the path to the directory where you copied the required libraries (see Prerequisites), for example, client-lib-dir("/opt/syslog-ng/lib/syslog-ng/java-modules/:/opt/hadoop/libs/").

disk-buffer()

Description: This option enables putting outgoing messages into the disk-buffer file of the destination to avoid message loss in case of a system failure on the destination side. It has the following options:

dir()

Type:

string

Default:

N/A

Description: Defines the folder where the disk-buffer files are stored.

Note that changing the value the dir() option will not move or copy existing files from the old directory to the new one.

Caution:

When creating a new dir() option for a disk-buffer file, or modifying an existing one, make sure you delete the persist file.

syslog-ng PE creates disk-buffer files based on the path recorded in the persist file. Therefore, if the persist file is not deleted after modifying the dir() option, then following a restart, syslog-ng PE will look for or create disk-buffer files in their old location. To ensure that syslog-ng PE uses the new dir() setting, the persist file must not contain any information about the destinations which the disk-buffer file in question belongs to.

disk-buf-size()
Type:	number [bytes]
Default:
Description: This is a required option. The maximum size of the disk-buffer file in bytes. The minimum value is 1048576 bytes. If you set a smaller value, the minimum value will be used automatically. It replaces the old log-disk-fifo-size() option.

mem-buf-length()
Type:	number [messages]
Default:	10000
Description: Use this option if the option reliable() is set to no. This option contains the number of messages stored in overflow queue. It replaces the old log-fifo-size() option. It inherits the value of the global log-fifo-size() option if provided. If it is not provided, the default value is 10000 messages. Note that this option will be ignored if the option reliable() is set to yes.

mem-buf-size()
Type:	number [bytes]
Default:	163840000
Description: Use this option if the option reliable() is set to yes. This option contains the size of the messages in bytes that is used in the memory part of the disk-buffer file. It replaces the old log-fifo-size() option. It does not inherit the value of the global log-fifo-size() option, even if it is provided. Note that this option will be ignored if the option reliable() is set to no.

quot-size()
Type:	number [messages]
Default:	1000
Description: The number of messages stored in the output buffer of the destination. Note that if you change the value of this option and the disk-buffer file already exists, the change will take effect when the disk-buffer file becomes empty.

reliable()

Type:

yes|no

Default:

Description: If set to yes, syslog-ng PE cannot lose logs in case of reload/restart, unreachable destination or syslog-ng PE crash. This solution provides a slower, but reliable disk-buffer option. It is created and initialized at startup and gradually grows as new messages arrive. If set to no, the normal disk-buffer option will be used. This provides a faster, but less reliable disk-buffer option.

Caution: Hazard of data loss!

If you change the value of reliable() option when there are messages in the disk-buffer file, the messages stored in the disk-buffer file will be lost.

truncate-size-ratio()

Type:

number (for percentage) between 0 and 1

Default:

0.1 (10%)

Description: Limits the truncation of the disk-buffer file. Truncating the disk-buffer file can slow down disk I/O operations, but it saves disk space. As a result, syslog-ng PE only truncates the file if the possible disk gain is more than truncate-size-ratio() times disk-buf-size().

Caution:

One Identity recommends that you do not modify the value of the truncate-size-ratio() option unless you are fully aware of the potential performance implications.

Example: Examples for using disk-buffer()

In the following case, reliable disk-buffer() is used.

destination d_demo {
    network("127.0.0.1"
        port(3333)
        disk-buffer(
            mem-buf-size(10000)
            disk-buf-size(2000000)
            reliable(yes)
            dir("/tmp/disk-buffer")
        )
    );
};

In the following case normal disk-buffer() is used.

destination d_demo {
    network("127.0.0.1"
        port(3333)
        disk-buffer(
            mem-buf-length(10000)
            disk-buf-size(2000000)
            reliable(no)
            dir("/tmp/disk-buffer")
        )
    );
};

frac-digits()

Type:	number
Default:	0

Description: The syslog-ng PE application can store fractions of a second in the timestamps according to the ISO8601 format. The frac-digits() parameter specifies the number of digits stored. The digits storing the fractions are padded by zeros if the original timestamp of the message specifies only seconds. Fractions can always be stored for the time the message was received.

NOTE: The syslog-ng PE application can add the fractions to non-ISO8601 timestamps as well.

NOTE: As syslog-ng PE is precise up to the microsecond, when the frac-digits() option is set to a value higher than 6, syslog-ng PE will truncate the fraction seconds in the timestamps after 6 digits.

hdfs-append-enabled()

Type:	true \| false
Default:	false

Description: When hdfs-append-enabled is set to true, syslog-ng PE will append new data to the end of an already existing HDFS file. Note that in this case, archiving is automatically disabled, and syslog-ng PE will ignore the hdfs-archive-dir option.

When hdfs-append-enabled is set to false, the syslog-ng PE application always creates a new file if the previous has been closed. In that case, appending data to existing files is not supported.

When you choose to write data into an existing file, syslog-ng PE does not extend the filename with a UUID suffix because there is no need to open a new file (a new unique ID would mean opening a new file and writing data into that).

Caution:

Before enabling the hdfs-append-enabled option, ensure that your HDFS server supports the append operation and that it is enabled. Otherwise syslog-ng PE will not be able to append data into an existing file, resulting in an error log.

hdfs-archive-dir()

Type:	string
Default:	N/A

Description: The path where syslog-ng PE will move the closed log files. If syslog-ng PE cannot move the file for some reason (for example, syslog-ng PE cannot connect to the HDFS NameNode), the file remains at its original location. For example, hdfs-archive-dir("/usr/hdfs/archive/").

NOTE: When hdfs-append-enabled is set to true, archiving is automatically disabled, and syslog-ng PE will ignore the hdfs-archive-dir option.

hdfs-file()

Type:	string
Default:	N/A

Description: The path and name of the log file. For example, hdfs-file("/usr/hdfs/mylogfile.txt"). syslog-ng PE checks if the path to the logfile exists. If a directory does not exist syslog-ng PE automatically creates it.

hdfs-file() supports the usage of macros. This means that syslog-ng PE can create files on HDFS dynamically, using macros in the file (or directory) name.

NOTE: When a filename resolved from the macros contains a character that HDFS does not support, syslog-ng PE will not be able to create the file. Make sure that you use macros that do not contain unsupported characters.

Example: Using macros in filenames

In the following example, a /var/testdb_working_dir/$DAY-$HOUR.txt file will be created (with a UUID suffix):

destination d_hdfs_9bf3ff45341643c69bf46bfff940372a {
    hdfs(
        client-lib-dir(/hdfs-libs)
        hdfs-uri("hdfs://hdp2.syslog-ng.example:8020")
        hdfs_file("/var/testdb_working_dir/$DAY-$HOUR.txt")
    );
};

As an example, if it is the 31st day of the month and it is 12 o'clock, then the name of the file will be 31-12.txt.

hdfs-max-filename-length()

Type:	number
Default:	255

Description: The maximum length of the filename. This filename (including the UUID that syslog-ng PE appends to it) cannot be longer than what the file system permits. If the filename is longer than the value of hdfs-max-filename-length, syslog-ng PE will automatically truncate the filename. For example, hdfs-max-filename-length("255").

hdfs-resources()

Type:	string
Default:	N/A

Description: The list of Hadoop resources to load, separated by semicolons. For example, hdfs-resources("/home/user/hadoop/core-site.xml;/home/user/hadoop/hdfs-site.xml").

hdfs-uri()

Type:	string
Default:	N/A

Description: The URI of the HDFS NameNode is in hdfs://IPaddress:port or hdfs://hostname:port format. When using MapR-FS, the URI of the MapR-FS NameNode is in maprfs://IPaddress or maprfs://hostname format, for example: maprfs://10.140.32.80. The IP address of the node can be IPv4 or IPv6. For example, hdfs-uri("hdfs://10.140.32.80:8020"). The IPv6 address must be enclosed in square brackets ([]) as specified by RFC 2732, for example, hdfs-uri("hdfs://[FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]:8020").

jvm-options()

Type:	list
Default:	N/A

Description: Specify the Java Virtual Machine (JVM) settings of your Java destination from the syslog-ng PE configuration file.

For example:

jvm-options("-Xss1M -XX:+TraceClassLoading")

You can set this option only as a global option, by adding it to the options statement of the syslog-ng configuration file.

kerberos-keytab-file()

Type:	string
Default:	N/A

Description: The path to the Kerberos keytab file that you received from your Kerberos administrator. For example, kerberos-keytab-file("/opt/syslog-ng/etc/hdfs.headless.keytab"). This option is needed only if you want to authenticate using Kerberos in Hadoop. You also have to set the hdfs-option-kerberos-principal() option. For details on the using Kerberos authentication with the hdfs() destination, see Kerberos authentication with syslog-ng hdfs() destination.

destination d_hdfs {
    hdfs(
        client-lib-dir("/hdfs-libs/lib")
        hdfs-uri("hdfs://hdp-kerberos.syslog-ng.example:8020")
        kerberos-keytab-file("/opt/syslog-ng/etc/hdfs.headless.keytab")
        kerberos-principal("hdfs-hdpkerberos@MYREALM")
        hdfs-file("/var/hdfs/test.log")
    );
};

Available in syslog-ng PE version 7.0.3 and later.

kerberos-principal()

Type:	string
Default:	N/A

Description: The Kerberos principal you want to authenticate with. For example, kerberos-principal("hdfs-user@MYREALM"). This option is needed only if you want to authenticate using Kerberos in Hadoop. You also have to set the hdfs-option-kerberos-keytab-file() option. For details on the using Kerberos authentication with the hdfs() destination, see Kerberos authentication with syslog-ng hdfs() destination.

destination d_hdfs {
    hdfs(
        client-lib-dir("/hdfs-libs/lib")
        hdfs-uri("hdfs://hdp-kerberos.syslog-ng.example:8020")
        kerberos-keytab-file("/opt/syslog-ng/etc/hdfs.headless.keytab")
        kerberos-principal("hdfs-hdpkerberos@MYREALM")
        hdfs-file("/var/hdfs/test.log")
    );
};

Available in syslog-ng PE version 7.0.3 and later.

log-fifo-size()

Type:	number
Default:	Use global setting.

Description: The number of messages that the output queue can store.

on-error()

Accepted values:

drop-message|drop-property|fallback-to-string|

silently-drop-message|silently-drop-property|silently-fallback-to-string

Default:

Use the global setting (which defaults to drop-message)

Description: Controls what happens when type-casting fails and syslog-ng PE cannot convert some data to the specified type. By default, syslog-ng PE drops the entire message and logs the error. Currently the value-pairs() option uses the settings of on-error().

drop-message: Drop the entire message and log an error message to the internal() source. This is the default behavior of syslog-ng PE.
drop-property: Omit the affected property (macro, template, or message-field) from the log message and log an error message to the internal() source.
fallback-to-string: Convert the property to string and log an error message to the internal() source.
silently-drop-message: Drop the entire message silently, without logging the error.
silently-drop-property: Omit the affected property (macro, template, or message-field) silently, without logging the error.
silently-fallback-to-string: Convert the property to string silently, without logging the error.

retries()

Type:	number [of attempts]
Default:	3

Description: The number of times syslog-ng PE attempts to send a message to this destination. If syslog-ng PE could not send a message, it will try again until the number of attempts reaches retries(), then drops the message.

template()

Type:	string
Default:	A format conforming to the default logfile format.

Description: Specifies a template defining the logformat to be used in the destination. Macros are described in Macros of syslog-ng PE. Please note that for network destinations it might not be appropriate to change the template as it changes the on-wire format of the syslog protocol which might not be tolerated by stock syslog receivers (like syslogd or syslog-ng itself). For network destinations make sure the receiver can cope with the custom format defined.

throttle()

Type:	number
Default:	0

Description: Sets the maximum number of messages sent to the destination per second. Use this output-rate-limiting functionality only when using the disk-buffer option as well to avoid the risk of losing messages. Specifying 0 or a lower value sets the output limit to unlimited.

time-reap()

Accepted values:	number (seconds)
Default:	0 (disabled)

Description: The time to wait in seconds before an idle destination file is closed. Note that if hdfs-archive-dir option is set and time-reap expires, archiving is triggered for the affected file.

time-zone()

Type:	name of the timezone, or the timezone offset
Default:	unspecified

Description: Convert timestamps to the timezone specified by this option. If this option is not set, then the original timezone information in the message is used. Converting the timezone changes the values of all date-related macros derived from the timestamp, for example, HOUR. For the complete list of such macros, see Date-related macros.

The timezone can be specified as using the name of the (for example, time-zone("Europe/Budapest")), or as the timezone offset in +/-HH:MM format (for example, +01:00). On Linux and UNIX platforms, the valid timezone names are listed under the /usr/share/zoneinfo directory.

ts-format()

Type:	rfc3164, bsd, rfc3339, iso
Default:	rfc3164

Description: Override the global timestamp format (set in the global ts-format() parameter) for the specific destination. For details, see ts-format().

syslog-ng Premium Edition 7.0.31 - Administration Guide

How syslog-ng PE interacts with HDFS

Storing messages with MapR-FS

Example: Storing logfiles with MapR-FS

Kerberos authentication with syslog-ng hdfs() destination

Prerequisites

HDFS destination options

client-lib-dir()

disk-buffer()

Example: Examples for using disk-buffer()

frac-digits()

hdfs-append-enabled()

hdfs-archive-dir()

hdfs-file()

Example: Using macros in filenames

hdfs-max-filename-length()

hdfs-resources()

hdfs-uri()

jvm-options()

kerberos-keytab-file()

kerberos-principal()

log-fifo-size()

on-error()

retries()

template()

throttle()

time-reap()

time-zone()

ts-format()

Seleccione su producto:

Con el fin de ofrecerle un mejor servicio, complete el campo Motivo del chat:

Soluciones recomendadas para su problema

syslog-ng Premium Edition 7.0.31 - Administration Guide

How syslog-ng PE interacts with HDFS

Storing messages with MapR-FS

Example: Storing logfiles with MapR-FS

Kerberos authentication with syslog-ng hdfs() destination

Prerequisites

HDFS destination options

client-lib-dir()

disk-buffer()

Example: Examples for using disk-buffer()

frac-digits()

hdfs-append-enabled()

hdfs-archive-dir()

hdfs-file()

Example: Using macros in filenames

hdfs-max-filename-length()

hdfs-resources()

hdfs-uri()

jvm-options()

kerberos-keytab-file()

kerberos-principal()

log-fifo-size()

on-error()

retries()

template()

throttle()

time-reap()

time-zone()

ts-format()