Chatee ahora con Soporte
Chat con el soporte

Identity Manager 9.1 - Release Notes

Supported data systems

This section lists the data systems supported by One Identity Manager connectors in this version.

Table 37: Supported data systems

Connector

Supported data systems

Connectors for delimited text files

Any delimited text files.

Connector for relational databases

Any relational databases supporting ADO.NET.

NOTE: Additional installation of an ADO.NET data provider from a third party may be necessary. Ask Microsoft or the relational database producer.

Gerneric LDAP connector

Any LDAP directory server conforming to version 3. The LDAP connector requires the directory server to be RFC conform. Specifically, to conform to the standards RFC 4514 (Lightweight Directory Access Protocol (LDAP): String Representation of Distinguished Names) and RFC 4512 (Lightweight Directory Access Protocol (LDAP): Directory Information Models).

NOTE: Other schema and provisioning process adjustments can be made depending on the schema.

Web service connector

Any SOAP web service providing wsdl.

NOTE: You can use the web service wizard to generate the configuration to write data to the web service. You require additional scripts for reading and synchronizing data used by the web service connector's methods.

Active Directory connector

Active Directory shipped with Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 and Windows Server 2022.

Microsoft Exchange connector

  • Microsoft Exchange 2013 with cumulative update 23

  • Microsoft Exchange 2016

  • Microsoft Exchange 2019 with cumulative update 1

  • Microsoft Exchange hybrid environments

SharePoint connector

  • SharePoint 2013

  • SharePoint 2016

  • SharePoint 2019

  • SharePoint Server Subscription Edition

SAP R/3 connector

  • SAP Web Application Server 6.40

  • SAP NetWeaver Application Server 7.00, 7.01, 7.02, 7.10, 7.11, 7.20, 7.31, 7.40, 7.40 SR 2, 7.41, 7.50, 7.51, 7.52, 7.54, and 7.69

  • SAP ECC 5.0 and 6.0

  • SAP S/4HANA On-Premise-Edition

Unix connector

Supports the most common Unix and Linux derivatives. For more information, see the specifications for One Identity Safeguard Authentication Services.

Domino connector

  • IBM Domino Server versions 8, 9, and 10

  • HCL Domino Server versions 11 and 12

  • IBM Notes Client 8.5.3 and 10.0

  • HCL Notes Client versions 11.0.1 and 12.0

    The 64-bit variant of Notes Client 12.0.1 is currently not supported.

Generic database connector

  • SQL Server

  • Oracle Database

  • SQLite

  • MySQL

  • DB2 (LUW)

  • CData ADO.NET Provider

  • SAP HANA

  • PostgreSQL

Mainframe connector

  • RACF

  • IBM i

  • CA Top Secret

  • CA ACF2

Windows PowerShell connector

  • Windows PowerShell version 3 or later

Active Roles connector

  • Active Roles 7.4.1, 7.4.3, 7.4.4, 7.4.5, 7.5, 7.5.2, 7.5.3, and 7.6

Azure Active Directory connector

  • Microsoft Azure Active Directory

    NOTE: Synchronization of Azure Active Directory tenants in national cloud deployments with the Azure Active Directory connector is not supported.

    This affects:

    • Microsoft Cloud for US Government (L5)

    • Microsoft Cloud Germany

    • Azure Active Directory and Microsoft 365 operated by 21Vianet in China

    For more information, see https://support.oneidentity.com/KB/312379.

  • Microsoft Teams

SCIM connector

Cloud applications, which recognize the System for Cross-domain Identity Management (SCIM) specification in version 2.0. They must conform to RCF 7643 (System for Cross-domain Identity Management: Core Schema) and RFC 7644 (System for Cross-domain Identity Management: Protocol).

Exchange Online connector

  • Microsoft Exchange Online

Google Workspace connector

  • Google Workspace

Oracle E-Business Suite connector

  • Oracle E-Business Suite versions 12.1, 12.2, and 12.2.10

SharePoint Online connector

  • Microsoft SharePoint Online

One Identity Safeguard connector
  • One Identity Safeguard versions 6.0, 6.7, 6.13, and 7.0

Product licensing

Use of this software is governed by the Software Transaction Agreement found at http://www.oneidentity.com/legal/sta.aspx and the SaaS Addendum at http://www.oneidentity.com/legal/saas-addendum.aspx. This software does not require an activation or license key to operate.

Upgrade and installation instructions

To install One Identity Manager 9.1 for the first time, follow the installation instructions in the One Identity Manager Installation Guide. For detailed instructions about updating, see the One Identity Manager Installation Guide.

IMPORTANT: Note the Advice for updating One Identity Manager.

Advice for updating One Identity Manager

Advice for updating One Identity Manager

  • One Identity Manager 9.1 is a further development of version 8.2.1. All official releases of version 9.0 without cumulative updates, 8.2.1, 8.1.5 or older can be upgraded to version 9.1. Updating newer versions can lead to a downgrade.

  • Test changes in a test system before you load a migration package into a production system. Use a copy of the production database for testing.

  • Ensure that the administrative system user, who is going to compile the database, has a password before you update the One Identity Manager database to version 9.1. Otherwise the schema update cannot be completed successfully.

  • For One Identity Manager databases on SQL Servers, it is recommended, on performance grounds, that you set the database to the Simple recovery model for the duration of the schema update.

  • During the update of a One Identity Manager database version 8.0.x to version 9.1, different columns that were already semantically defined as mandatory fields become physical mandatory fields.

    During the schema update with the Configuration Wizard, errors may occur due to inconsistent data. The update quits with an error message.

    <table>.<column> must not be null

    Cannot insert the value NULL into column '<column>', table '<table>'; column does not allow nulls.

    UPDATE fails

    Check and correct data consistency before updating a One Identity Manager database. In the add-on for the Configuration Module on the installation medium, a test script (\SDK\SQLSamples\MSSQL2K\30374.sql) is provided. In case it fails, correct the data and restart the update.

  • One Identity Manager uses In-Memory OLTP ((Online Transactional Processing) for memory optimized data access. The database server must support Extreme Transaction Processing (XTP). If XTP is not enabled, the installation or update will not start. Check whether the SQL Server property Supports Extreme Transaction Processing (IsXTPSupported) is set to True.

    The following prerequisites must be fulfilled to create memory-optimized tables:

    • A database file with the file type Filestream data must exist.

    • A memory-optimized data filegroup must exist.

    The Configuration Wizard checks whether these prerequisites are fulfilled before the One Identity Manager database can be installed or updated. The Configuration Wizard offers repair methods for creating the database file and database group.

  • During the update, calculation tasks are queued in the database. These are processed by the DBQueue Processor. Processing calculation tasks may take some time depending on the amount of data and system performance.

    This is particularly the case if you save large amounts of historical data in the One Identity Manager database, such as change data or data from process handling.

    Therefore, ensure that you have configured an appropriate procedure for archiving the data before you update the database. For more information about archiving data, see the One Identity Manager Data Archiving Administration Guide.

  • For the period of the update, the database is set to single user mode. Close all existing connections to the database before starting the schema update.

  • You may experience problems activating single-user mode when using database mirroring.

  • During installation of a new One Identity Manager database with version 9.1 or while updating a One Identity Manager database from version 8.0.x to version 9.1, you can specify whether you want to work with granular permissions at server and database level. The Configuration Wizard then creates SQL Server logins and database users with the necessary permissions for administrative user, configuration users and end users. For more detailed information about permissions, see the One Identity Manager Installation Guide.

    After updating One Identity Manager, change the connection parameters. This affects, for example, the connection data for the database (DialogDatabase), the One Identity Manager Service, the application server, the administration and configuration tools, the web applications and web services as well as the connection data in synchronization projects.

    NOTE: If you want to switch to the granular permissions concept when you upgrade from version 8.0.x to version 9.1, use an installation user with permissions for this permissions concept. For more detailed information about permissions, see the One Identity Manager Installation Guide.

    If you want to switch to granular permissions when you update from 8.1.x, contact support. To access the Support Portal, go to https://support.oneidentity.com/identity-manager/.

  • To successfully compile HTML applications with the Configuration Wizard, you must download packages from the NPM repository. Ensure that the workstation running the Configuration Wizard can establish a connection to the website https://registry.npmjs.org.

    Alternatively, it is possible to download the packages from a proxy server and make them available manually. For more information, see the knowledge article https://support.oneidentity.com/kb/266000.

  • After the update has completed, the database switches automatically to multi-user mode. If this is not possible, you receive a message in which you can manually switch to multi-user mode.

  • Once this version has been installed, users that need to access the REST API in the application server require the Enables access to the REST API on the application server (AppServer_API) function. Assign this program function to the users. For more information, see the One Identity Manager Authorization and Authentication Guide.

Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación