Tchater maintenant avec le support
Tchattez avec un ingénieur du support

One Identity Safeguard for Privileged Sessions 6.0.9 - REST API Reference Guide

Introduction Using the SPS REST API Basic settings User management and access control Managing SPS General connection settings HTTP connections Citrix ICA connections RDP connections SSH connections Telnet connections VNC connections Search, download, and index sessions Reporting Health and maintenance Advanced authentication and authorization Completing the Welcome Wizard using REST Enable and configure analytics using REST

Disable a configuration synchronization plugin

To disable a configuration synchronization plugin on the Central Management node, complete the following steps.

  1. Open a transaction.

    For details, see Open a transaction.

  2. To disable the plugin, replace /api/cluster/configuration_sync_plugin with:
    {
        "enabled": false
    }

    For example:

    curl -X POST -H "Content-Type: application/json" --cookie cookies https://<IP-address-of-Central-Management-node>/api/cluster/configuration_sync_plugin --data '{"enabled": false}'

    The following is a sample response received:

    {
        "plugin": {
            "key": null,
            "meta": {}
        }
    }
  3. Commit your changes.

    For details, see Commit a transaction.

General connection settings

Topics:

Channel policy

The channel policy lists the channels (for example, terminal session and SCP in SSH, Drawing, Clipboard in RDP) that can be used in a connection. The channel policy can further restrict access to each channel based on the IP address of the client or the server, a user list, user group, or a time policy. For example, all clients may access the servers defined in a connection via SSH terminal, but the channel policy may restrict SCP access only to a single client. The policies set in the channel policy are checked when the user attempts to open a particular channel type in the connection.

Channel policies are protocol specific. To list the available Channel policies for a protocol, use the following command.

curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/<http|ica|rdp|ssh|telnet|vnc>/channel_policies

The following sections detail the properties of Channel policy objects.

URL
GET https:<IP-address-of-SPS>/api/configuration/<http|ica|rdp|ssh|telnet|vnc>/channel_policies/<object-id>
Cookies
Cookie name Description Required Values
session_id Contains the authentication token of the user Required

The value of the session ID cookie received from the REST server in the authentication response, for example, a1f71d030e657634730b9e887cb59a5e56162860. For details on authentication, see Authenticate to the SPS REST API.

Note that this session ID refers to the connection between the REST client and the SPS REST API. It is not related to the sessions that SPS records (and which also have a session ID, but in a different format).

Sample request

The following command lists the properties of a specific RDP Channel policy object.

curl --cookie cookies -https:<IP-address-of-SPS>/api/configuration/<rdp>/channel_policies/<object-id>
Response

The following is a sample response received, showing the properties of Channel policy objects.

For details of the meta object, see Message format.

{
  "body": {
    "name": "terminal-only",
    "rules": [
      {
        "actions": {
          "audit": true,
          "content_policy": null,
          "four_eyes": false,
          "ids": false
        },
        "allowed_for": {
          "clients": [],
          "gateway_groups": [],
          "remote_groups": [],
          "servers": [],
          "time_policy": {
            "key": "-100",
            "meta": {
              "href": "/api/configuration/policies/time_policies/-100"
            }
          }
        },
        "channel": "#drawing"
      },
      {
        "actions": {
          "audit": true,
          "four_eyes": false,
          "ids": false
        },
        "allowed_for": {
          "clients": [],
          "gateway_groups": [],
          "remote_groups": [],
          "servers": [],
          "time_policy": {
            "key": "-100",
            "meta": {
              "href": "/api/configuration/policies/time_policies/-100"
            }
          }
        },
        "channel": "cliprdr"
      }
    ]
  }
}
Element Type Description
name string Top level element, the name of the object. This name is also displayed on the SPS web interface. It cannot contain whitespace.
rules list of JSON objects Top level element, contains the configuration properties of the object.
actions JSON object The actions that SPS performs for the channel, for example, recording the traffic into an audit trail.
allowed_for JSON object Specifies the access control rules of the channel, for example, permitted target IP addresses or usergroups.
channel string

The type of the channel. Note that channels are protocol specific, and different type of channels can have different parameters.

For example:

"channel": "#drawing",
Element Type Description
actions JSON object The list of actions to perform when the Content policy matches the analyzed traffic. All actions are boolean values (true or false)
audit boolean

Set to true to record the activities of the channel into audit trails. Possible values: true or false

content_policy JSON object

Specifies the Content policy to use in the channel, otherwise its value is null (which is the default). For details on Content policies, see Real-time content monitoring with Content Policies For example:

"content_policy": {
"key": "<object-id>",
}
four_eyes boolean

Set to true to require four-eyes authorization to access the channel. For details, see "Configuring four-eyes authorization" in the Administration Guide. Possible values: true or false

Element Type Description
allowed_for JSON object Specifies the access control rules of the channel.
clients list

To restrict the availability of the channel only to certain clients, list the IP address or network of the clients allowed to use this the channel. For IPv6 addresses, use the canonized format of the address. For example:

"clients": [
  "192.168.1.1/24",
  "2001:db8:85a3::8a2e:0:0/32"
                        
gateway_groups list

You can control channel access during gateway authentication with blacklists or whitelists of user groups. You can use local user lists on SPS, or LDAP groups.

To use this option, you must also configure web gateway authentication in the connection policy, or client-side gateway authentication back-end in the authentication policy.

For example:

"gateway_groups": ["group1", "group2"],

To configure local user lists, see User lists.

remote_groups list

You can control channel access during authentication to the remote server with blacklists or whitelists of user groups. You can use local user lists on SPS, or LDAP groups.

For example:

"remote_groups": ["group1", "group2"],

To configure local user lists, see User lists.

servers list

To restrict the availability of the channel only to certain servers, list the IP address or network of the servers that your clients are allowed to access using this the channel. For IPv6 addresses, use the canonized format of the address. For example:

"servers": [
  "192.168.1.1/24",
  "2001:db8:85a3::8a2e:0:0/32"
                        
time_policy JSON object

Specifies the Time policy to use in the channel. If you do not want to restrict access, use the default 7x24 policy-100. For details on Time policies, see Time policy. For example:

"time_policy": {
  "key": "-100",
}

Policies

List of endpoints for configuring policies and settings that can be referenced when configuring connections.

URL
GET https://<IP-address-of-SPS>/api/configuration/policies
Cookies
Cookie name Description Required Values
session_id Contains the authentication token of the user Required

The value of the session ID cookie received from the REST server in the authentication response, for example, a1f71d030e657634730b9e887cb59a5e56162860. For details on authentication, see Authenticate to the SPS REST API.

Note that this session ID refers to the connection between the REST client and the SPS REST API. It is not related to the sessions that SPS records (and which also have a session ID, but in a different format).

Sample request

The following command lists the available endpoints.

curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/policies
Response

The following is a sample response received when listing the available configuration endpoints.

For details of the meta object, see Message format.

{
  "items": [
    {
      "key": "aa_plugin_instances",
      "meta": {
        "href": "/api/configuration/policies/aa_plugin_instances"
      }
    },
    {
      "key": "analytics",
      "meta": {
        "href": "/api/configuration/policies/analytics"
      }
    },
    {
      "key": "archive_cleanup_policies",
      "meta": {
        "href": "/api/configuration/policies/archive_cleanup_policies"
      }
    },
    {
      "key": "audit_policies",
      "meta": {
        "href": "/api/configuration/policies/audit_policies"
      }
    },
    {
      "key": "backup_policies",
      "meta": {
        "href": "/api/configuration/policies/backup_policies"
      }
    },
    {
      "key": "content_policies",
      "meta": {
        "href": "/api/configuration/policies/content_policies"
      }
    },
    {
      "key": "credentialstores",
      "meta": {
        "href": "/api/configuration/policies/credentialstores"
      }
    },
    {
      "key": "indexing",
      "meta": {
        "href": "/api/configuration/policies/indexing"
      }
    },
    {
      "key": "ldap_servers",
      "meta": {
        "href": "/api/configuration/policies/ldap_servers"
      }
    },
    {
      "key": "signing_cas",
      "meta": {
        "href": "/api/configuration/policies/signing_cas"
      }
    },
    {
      "key": "time_policies",
      "meta": {
        "href": "/api/configuration/policies/time_policies"
      }
    },
    {
      "key": "trusted_ca_lists",
      "meta": {
        "href": "/api/configuration/policies/trusted_ca_lists"
      }
    },
    {
      "key": "user_databases",
      "meta": {
        "href": "/api/configuration/policies/user_databases"
      }
    },
    {
      "key": "userlists",
      "meta": {
        "href": "/api/configuration/policies/userlists"
      }
    },
    {
      "key": "usermapping_policies",
      "meta": {
        "href": "/api/configuration/policies/usermapping_policies"
      }
    }
  ],
  "meta": {
    "first": "/api/configuration/aaa",
    "href": "/api/configuration/policies",
    "last": "/api/configuration/x509",
    "next": "/api/configuration/private_keys",
    "parent": "/api/configuration",
    "previous": "/api/configuration/plugins",
    "transaction": "/api/transaction"
  }
}
Endpoint Description
aa_plugin_instances Authentication and Authorization plugin policies
analytics Analytics.
archive_cleanup_policies Archive/Cleanup policies.
audit_policies Audit trail encryption, timestamping, and signing.
backup_policies Backup policies.
content_policies Actions for detected commands, screen content, credit card information, and window titles.
credentialstores Local and external credential stores.
indexing Languages for Optical Character Recognition (OCR).
ldap_servers LDAP servers.
signing_cas

Signing CAs for generating the server-side certificates on the fly. You can use such CAs in SSL-encrypted RDP sessions, RDP sessions that use Network Level Authentication (CredSSP), or SSH connections that use X.509-based authentication.

To configure signing for audit trails, use the audit_policies endpoint.

time_policies Time policies.
trusted_ca_lists Trusted Certificate Authorities (CAs), and options for restricting the accepted certificates.
user_databases Local User Databases are available for RDP, SSH and Telnet protocols, and can be used to authenticate the clients to credentials (passwords, public keys, and certificates) that are locally available on SPS.
userlists Local white- or blacklists of usernames that allow fine-control over who can access a connection or a channel.
usermapping_policies Usermapping policies describe who can use a specific username to access the remote server.
Status and error codes

The following table lists the typical status and error codes for this request. For a complete list of error codes, see Application level error codes.

Code Description Notes
401 Unauthenticated The requested resource cannot be retrieved because the client is not authenticated and the resource requires authorization to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
401 AuthenticationFailure Authenticating the user with the given credentials has failed.
404 NotFound The requested object does not exist.
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation