Tchater maintenant avec le support
Tchattez avec un ingénieur du support

syslog-ng Premium Edition 7.0.34 - Administration Guide

Preface Introduction to syslog-ng The concepts of syslog-ng Installing syslog-ng PE The syslog-ng PE quick-start guide The syslog-ng PE configuration file Collecting log messages — sources and source drivers
How sources work default-network-drivers: Receive and parse common syslog messages internal: Collecting internal messages file: Collecting messages from text files google-pubsub: collecting messages from the Google Pub/Sub messaging service wildcard-file: Collecting messages from multiple text files linux-audit: Collecting messages from Linux audit logs mssql, oracle, sql: collecting messages from an SQL database network: Collecting messages using the RFC3164 protocol (network() driver) office365: Fetching logs from Office 365 osquery: Collect and parse osquery result logs pipe: Collecting messages from named pipes program: Receiving messages from external applications python: writing server-style Python sources python-fetcher: writing fetcher-style Python sources snmptrap: Read Net-SNMP traps syslog: Collecting messages using the IETF syslog protocol (syslog() driver) system: Collecting the system-specific log messages of a platform systemd-journal: Collecting messages from the systemd-journal system log storage systemd-syslog: Collecting systemd messages using a socket tcp, tcp6,udp, udp6: Collecting messages from remote hosts using the BSD syslog protocol udp-balancer: Receiving UDP messages at very high rate unix-stream, unix-dgram: Collecting messages from UNIX domain sockets windowsevent: Collecting Windows event logs
Sending and storing log messages — destinations and destination drivers
elasticsearch2>: Sending messages directly to Elasticsearch version 2.0 or higher (DEPRECATED) elasticsearch-http: Sending messages to Elasticsearch HTTP Event Collector file: Storing messages in plain-text files google_bigquery(): Sending logs to a Google BigQuery table google_bigquery_managedaccount(): Sending logs to a Google BigQuery table authenticated by Google Cloud managed service account google_pubsub(): Sending logs to the Google Cloud Pub/Sub messaging service google_pubsub-managedaccount(): Sending logs to the Google Cloud Pub/Sub messaging service authenticated by Google Cloud managed service account hdfs: Storing messages on the Hadoop Distributed File System (HDFS) http: Posting messages over HTTP kafka(): Publishing messages to Apache Kafka (Java implementation) (DEPRECATED) kafka-c(): Publishing messages to Apache Kafka using the librdkafka client (C implementation) logstore: Storing messages in encrypted files mongodb: Storing messages in a MongoDB database network: Sending messages to a remote log server using the RFC3164 protocol (network() driver) pipe: Sending messages to named pipes program: Sending messages to external applications python: writing custom Python destinations sentinel(): Sending logs to the Microsoft Azure Sentinel cloud snmp: Sending SNMP traps smtp: Generating SMTP messages (email) from logs splunk-hec: Sending messages to Splunk HTTP Event Collector sql(): Storing messages in an SQL database stackdriver: Sending logs to the Google Stackdriver cloud syslog: Sending messages to a remote logserver using the IETF-syslog protocol syslog-ng(): Forward logs to another syslog-ng node tcp, tcp6, udp, udp6: Sending messages to a remote log server using the legacy BSD-syslog protocol (tcp(), udp() drivers) unix-stream, unix-dgram: Sending messages to UNIX domain sockets usertty: Sending messages to a user terminal — usertty() destination Client-side failover
Routing messages: log paths, flags, and filters Global options of syslog-ng PE TLS-encrypted message transfer Advanced Log Transport Protocol Reliability and minimizing the loss of log messages Manipulating messages parser: Parse and segment structured messages Processing message content with a pattern database Correlating log messages Enriching log messages with external data Monitoring statistics and metrics of syslog-ng Multithreading and scaling in syslog-ng PE Troubleshooting syslog-ng Best practices and examples The syslog-ng manual pages Glossary

syslog-ng.8

Name

syslog-ng — syslog-ng system logger application

Synopsis

syslog-ng [options]

Description

This manual page is only an abstract, for the complete documentation of syslog-ng PE, see the syslog-ng PE Documentation page.

The syslog-ng PE application is a flexible and highly scalable system logging application. Typically, syslog-ng PE is used to manage log messages and implement centralized logging, where the aim is to collect the log messages of several devices on a single, central log server. The different devices - called syslog-ng clients - all run syslog-ng PE, and collect the log messages from the various applications, files, and other sources. The clients send all important log messages to the remote syslog-ng PE server, where the server sorts and stores them.

Options
  • --caps

    Run syslog-ng PE process with the specified POSIX capability flags.

    • If the --no-caps option is not set, and the host supports CAP_SYSLOG, syslog-ng PE uses the following capabilities: cap_net_bind_service, cap_net_broadcast, cap_net_raw, cap_dac_read_search, cap_dac_override, cap_chown, cap_fowner=p cap_syslog=ep

    • If the --no-caps option is not set, and the host does not support CAP_SYSLOG, syslog-ng PE uses the following capabilities: cap_net_bind_service, cap_net_broadcast, cap_net_raw, cap_dac_read_search, cap_dac_override, cap_chown, cap_fowner=p cap_sys_admin=ep

    For example:

    /opt/syslog-ng/sbin/syslog-ng -Fv --caps cap_sys_admin,cap_chown,cap_dac_override,cap_net_bind_service,cap_fowner=pi

    Note that the capabilities are not case sensitive, the following command is also good: /opt/syslog-ng/sbin/syslog-ng -Fv --caps CAP_SYS_ADMIN,CAP_CHOWN,CAP_DAC_OVERRIDE,CAP_NET_BIND_SERVICE,CAP_FOWNER=pi

    For details on the capability flags, see the following man pages: >cap_from_text(3) and >capabilities(7)

  • --cfgfile <file> or -f <file>

    Use the specified configuration file.

  • --chroot <dir> or -C <dir>

    Change root to the specified directory. The configuration file is read after chrooting so, the configuration file must be available within the chroot. That way it is also possible to reload the syslog-ng configuration after chrooting. However, note that the --user and --groupoptions are resolved before chrooting.

  • --control <file> or -c <file>

    Set the location of the syslog-ng control socket. Default value: >/var/run/syslog-ng.ctl

  • --debug or -d

    Start syslog-ng PE in debug mode.

  • --default-modules

    A comma-separated list of the modules that are loaded automatically. Modules not loaded automatically can be loaded by including the @module <modulename> statement in the syslog-ng PE configuration file. Available only in syslog-ng PE version 4.1 and later.

  • --enable-core

    Enable syslog-ng PE to write core files in case of a crash to help support and debugging.

  • --fd-limit <number>

    Set the minimal number of required file descriptors (fd-s). This sets how many files syslog-ng PE can keep open simultaneously. Default value: 4096. Note that this does not override the global ulimit setting of the host.

  • --foreground or -F

    Do not daemonize, run in the foreground. When running in the foreground, syslog-ng PE starts from the current directory ($CWD) so it can create core files (normally, syslog-ng PE starts from >$PREFIX/var).

  • --group <group> or -g <group>

    Switch to the specified group after initializing the configuration file.

  • --help or -h

    Display a brief help message.

  • --module-registry

    Display the list and description of the available modules. Note that not all of these modules are loaded automatically, only the ones specified in the --default-modules option. Available only in syslog-ng PE 4 F1 and later.

  • --no-caps

    Run syslog-ng PE as root, without capability-support. This is the default behavior. On Linux, it is possible to run syslog-ng PE as non-root with capability-support if syslog-ng PE was compiled with the --enable-linux-caps option enabled. (Run syslog-ng --version to display the list of enabled build parameters.)

    To run syslog-ng PE with specific capabilities, use the --caps option.

  • --persist-file <persist-file> or -R <persist-file>

    Set the path and name of the syslog-ng.persist file where the persistent options and data are stored.

  • --pidfile <pidfile> or -p <pidfile>

    Set path to the PID file where the pid of the main process is stored.

  • --preprocess-into <output-file>

    After processing the configuration file and resolving included files and variables, write the resulting configuration into the specified output file. Available only in syslog-ng PE 4 F1 and later.

  • --process-mode <mode>

    Sets how to run syslog-ng PE: in the foreground (mainly used for debugging), in the background as a daemon, or in safe-background mode. By default, syslog-ng runs in safe-background mode. This mode creates a supervisor process called supervising syslog-ng, that restarts syslog-ng PE if it crashes.

  • --stderr or -e

    Log internal messages of syslog-ng PE to stderr. Mainly used for debugging purposes in conjunction with the --foreground option. If not specified, syslog-ng PE will log such messages to its internal source.

  • --syntax-only or -s

    Verify that the configuration file is syntactically correct and exit.

  • --user <user> or -u <user>

    Switch to the specified user after initializing the configuration file (and optionally chrooting). Note that it is not possible to reload the syslog-ng configuration if the specified user has no privilege to create the >/dev/log file.

  • --verbose or -v

    Enable verbose logging used to troubleshoot syslog-ng PE.

  • --version or -V

    Display version number and compilation information, and also the list and short description of the available modules. For detailed description of the available modules, see the --module-registry option. Note that not all of these modules are loaded automatically, only the ones specified in the --default-modulesoption.

  • --worker-threads

    Sets the number of worker threads syslog-ng PE can use, including the main syslog-ng PE thread. Note that certain operations in syslog-ng PE can use threads that are not limited by this option. This setting has effect only when syslog-ng PE is running in multithreaded mode. Available only in syslog-ng PE 4 F1 and later. See The syslog-ng PE 7 Administrator Guide for details.

Setting default command-line options

You can set default settings for syslog-ng PE — syslog-ng PE will always run with these default command-line parameters. You can specify your default settings in the following files:

  • >/etc/default/syslog-ng

  • >/etc/sysconfig/syslog-ng (only for RedHat platforms)

  • >$SYSLOGNG_PREFIX/etc/default/syslog-ng, where $SYSLOGNG_PREFIX is the installation directory of syslog-ng PE. For version 4.0, this is >/opt/syslog-ng

During startup, syslog-ng PE will automatically use the settings from these files if they exist. You can set the following options:

  • MAXWAIT

    The number of seconds the init script will wait for syslog-ng PE to shut down properly. If the syslog-ng PE process does not shut down during this period, it is terminated with a SIGKILL signal. Increase this value if you have lots of separate disk-buffer files (for example, to 60 seconds).

  • SYSLOGNG_OPTIONS

    A string of additional command-line options for the syslog-ng PE daemon.

Files

>/opt/syslog-ng/

>/opt/syslog-ng/etc/syslog-ng.conf

See also

The syslog-ng.conf manual page

NOTE: For the detailed documentation of syslog-ng PE see syslog-ng PE Documentation page.

If you experience any problems or need help with syslog-ng PE, visit the syslog-ng mailing list.

For news and notifications about syslog-ng PE, visit the syslog-ng blogs.

syslog-ng.conf.5

Name

syslog-ng.conf — syslog-ng configuration file

Synopsis

syslog-ng.conf

Description

This manual page is only an abstract, for the complete documentation of syslog-ng PE, see the syslog-ng PE Documentation page.

The syslog-ng PE application is a flexible and highly scalable system logging application. Typically, syslog-ng PE is used to manage log messages and implement centralized logging, where the aim is to collect the log messages of several devices on a single, central log server. The different devices - called syslog-ng clients - all run syslog-ng PE, and collect the log messages from the various applications, files, and other sources. The clients send all important log messages to the remote syslog-ng PE server, where the server sorts and stores them.

Basic concepts of syslog-ng PE

The syslog-ng PE application reads incoming messages and forwards them to the selected destinations. The syslog-ng PE application can receive messages from files, remote hosts, and other sources.

Log messages enter syslog-ng PE in one of the defined sources, and are sent to one or more destinations.

Sources and destinations are independent objects, log paths define what syslog-ng PE does with a message, connecting the sources to the destinations. A log path consists of one or more sources and one or more destinations: messages arriving from a source are sent to every destination listed in the log path. A log path defined in syslog-ng PE is called a log statement.

Optionally, log paths can include filters. Filters are rules that select only certain messages, for example, selecting only messages sent by a specific application. If a log path includes filters, syslog-ng PE sends only the messages satisfying the filter rules to the destinations set in the log path.

Other optional elements that can appear in log statements are parsers and rewriting rules. Parsers segment messages into different fields to help processing the messages, while rewrite rules modify the messages by adding, replacing, or removing parts of the messages.

Configuring syslog-ng PE
  • The main body of the configuration file consists of object definitions sources, destinations, logpaths define which log message are received and where they are sent. All identifiers, option names and attributes, and any other strings used in the syslog-ng PE configuration file are case sensitive. Object definitions (also called statements) have the following syntax:

    type-of-the-object identifier-of-the-object {<parameters>};
    • Type of the object: One of source, destination, log, filter, parser, rewrite rule, or template.

      Identifier of the object: A unique name identifying the object. When using a reserved word as an identifier, enclose the identifier in quotation marks ("").

      All identifiers, attributes, and any other strings used in the syslog-ng PE configuration file are case sensitive.

      TIP: Use identifiers that refer to the type of the object they identify. For example, prefix source objects with s_, destinations with d_, and so on.

      NOTE:

      Repeating a definition of an object (that is, defining the same object with the same id more than once) is not allowed, unless you use the @define allow-config-dups 1 definition in the configuration file.

    • Parameters: The parameters of the object, enclosed in braces {parameters}.

    • Semicolon: Object definitions end with a semicolon (;).

    For example, the following line defines a source and calls it s_internal.

    source s_internal { internal(); };

    The object can be later referenced in other statements using its ID, for example, the previous source is used as a parameter of the following log statement:

    log { source(s_internal); destination(d_file); };
  • The parameters and options within a statement are similar to function calls of the C programming language: the name of the option followed by a list of its parameters enclosed within brackets and terminated with a semicolon.

    option(parameter1, parameter2); option2(parameter1, parameter2);

    For example, the file() driver in the following source statement has three options: the filename (/var/log/apache/access.log), follow-freq(), and flags(). The follow-freq() option also has a parameter, while the flags() option has two parameters.

    source s_tail { file("/var/log/apache/access.log"
        follow-freq(1) flags(no-parse, validate-utf8)); };

    Objects may have required and optional parameters. Required parameters are positional, meaning that they must be specified in a defined order. Optional parameters can be specified in any order using the option(value) format. If a parameter (optional or required) is not specified, its default value is used. The parameters and their default values are listed in the reference section of the particular object.

    Example: Using required and optional parameters

    The unix-stream() source driver has a single required argument: the name of the socket to listen on. Optional parameters follow the socket name in any order, so the following source definitions have the same effect:

    source s_demo_stream1 {
            unix-stream("<path-to-socket>" max-connections(10) group(log)); };
    source s_demo_stream2 {
            unix-stream("<path-to-socket>" group(log) max-connections(10)); };
  • Some options are global options, or can be set globally, for example, whether syslog-ng PE should use DNS resolution to resolve IP addresses.

    options { use-dns(no); };
  • Objects can be used before definition.

  • Objects can be defined inline as well. This is useful if you use the object only once (for example, a filter).

  • To add comments to the configuration file, start a line with # and write your comments. These lines are ignored by syslog-ng PE.

                  # Comment: This is a stream source
    source s_demo_stream {
            unix-stream("<path-to-socket>" max-connections(10) group(log)); };

The syntax of log statements is as follows:

log {
    source(s1); source(s2); ...
    optional_element(filter1|parser1|rewrite1);
    optional_element(filter2|parser2|rewrite2);
    ...
    destination(d1); destination(d2); ...
    flags(flag1[, flag2...]);
};

The following log statement sends all messages arriving to the localhost to a remote server.

source s_localhost { network(ip(127.0.0.1) port(1999)); };
destination d_tcp { network("10.1.2.3" port(1999) localport(999)); };
log { source(s_localhost); destination(d_tcp); };

The syslog-ng PE application has a number of global options governing DNS usage, the timestamp format used, and other general points. Each option may have parameters, similarly to driver specifications. To set global options add an option statement to the syslog-ng PE configuration file using the following syntax:

        options { option1(params); option2(params); ... };
Example: Using global options

To disable domain name resolving, add the following line to the syslog-ng PE configuration file:

options { use-dns(no); };

The sources, destinations, and filters available in syslog-ng PE are listed below. For details, see the syslog-ng PE Documentation page.

Table: Source drivers available in syslog-ng PE
Name Description
file() Opens the specified file and reads messages.
internal() Messages generated internally in syslog-ng PE.
network() Receives messages from remote hosts using the BSD-syslog protocol over IPv4 and IPv6. Supports the TCP, UDP, and TLS network protocols.
pipe() Opens the specified named pipe and reads messages.
program() Opens the specified application and reads messages from its standard output.
sun-stream(), sun-streams() Opens the specified STREAMS device on Solaris systems and reads incoming messages.
syslog() Listens for incoming messages using the new IETF-standard syslog protocol.
system() Automatically detects which platform syslog-ng PE is running on, and collects the native log messages of that platform.
systemd-journal() Collects messages directly from the journal of platforms that use systemd.
systemd-syslog() Collects messages from the journal using a socket on platforms that use systemd.
unix-dgram() Opens the specified unix socket in SOCK_DGRAM mode and listens for incoming messages.
unix-stream() Opens the specified unix socket in SOCK_STREAM mode and listens for incoming messages.
windowsevent() Reads messages from the Windows Event Collector tool.
Table: Destination drivers available in syslog-ng PE
Name Description
elasticsearch2 Sends messages to an Elasticsearch server. The elasticsearch2 driver supports Elasticsearch version 2 and newer.
file() Writes messages to the specified file.
hdfs() Sends messages into a file on a Hadoop Distributed File System (HDFS) or MapR-FS node.
http() Sends messages over the HTTP protocol.
kafka() Publishes log messages to the Apache Kafka message bus, where subscribers can access them.
logstore() Writes messages securely into encrypted, compressed, and timestamped binary files.
mongodb() Sends messages to a MongoDB database.
network() Sends messages to a remote host using the BSD-syslog protocol over IPv4 and IPv6. Supports the TCP, UDP, and TLS network protocols.
pipe() Writes messages to the specified named pipe.
program() Forks and launches the specified program, and sends messages to its standard input.
smtp() Sends email messages to the specified recipients.
Splunk Forward your log messages to Splunk.
sql() Sends messages into an SQL database. In addition to the standard syslog-ng packages, the sql() destination requires database-specific packages to be installed.
syslog() Sends messages to the specified remote host using the IETF-syslog protocol. The IETF standard supports message transport using the UDP, TCP, and TLS networking protocols.
unix-dgram() Sends messages to the specified unix socket in SOCK_DGRAM style (BSD).
unix-stream() Sends messages to the specified unix socket in SOCK_STREAM style (Linux).
usertty() Sends messages to the terminal of the specified user, if the user is logged in.
Table: Filter functions available in syslog-ng PE
Name Description
facility() Filter messages based on the sending facility.
filter() Call another filter function.
host() Filter messages based on the sending host.
inlist() File-based whitelisting and blacklisting.
level() or priority() Filter messages based on their priority.
match() Use a regular expression to filter messages based on a specified header or content field.
message() Use a regular expression to filter messages based on their content.
netmask() Filter messages based on the IP address of the sending host.
program() Filter messages based on the sending application.
source() Select messages of the specified syslog-ng PE source statement.
tags() Select messages having the specified tag.
Files

/opt/syslog-ng/

/opt/syslog-ng/etc/syslog-ng.conf

See also

The syslog-ng manual page

NOTE: For the detailed documentation of syslog-ng PE see syslog-ng PE Documentation page.

If you experience any problems or need help with syslog-ng PE, visit the syslog-ng mailing list.

For news and notifications about syslog-ng PE, visit the syslog-ng blogs.

Glossary

Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation