Restituisci
-
Titolo
Upgrading an HA cluster from version 5.X.X to 6.X -
Descrizione
Upgrading an HA cluster from 5.x.x to 6.x in two steps (5.x>6.0.x>6.x) there is a possibility that after a takeover neither appliance will come up. -
Causa
After upgrading a HA cluster to SPS version 6.0.0 on the Basic Settings -> High availability page the Current Boot firmware version of the Slave node shows the previous version instead of 6.0.The actual running firmware is the "Active" firmware which is 6.0.0. The "Current" firmware is the one which would be started during the next reboot.
This is a known issue in version 6.0.0 and 6.1.0. The reason is the symbolic link of the "Current" firmware is not updated during the upgrade process.
-
Risoluzione
In order to avoid this situation, follow the guide below.
1., Upgrade from 5.x.x to 6.0.x.
2., Once the upgrade is done, do a manual takeover to the Slave node.
3., Upgrade to 6.x.
4., Do another takeover.
Once this is done, the issue should not be encountered.
If there are any questions, please open an SR at https://support.oneidentity.com/