It is the responsibility of the Operations Administrator or the Appliance Administrator to monitor the status of the appliance.

To go to Appliance Information:

  • web client: Navigate to Appliance > Appliance Information.

To refresh:

  • web client: Select the number of seconds to refresh in Refresh every 30 seconds . A refresh is started immediately when the value is changed and the next refresh is scheduled based on the selected value.

The following information displays.

Table 6: Appliance properties
Property Description
Appliance Name

The name of the appliance.
The Appliance Administrator can modify the name. Click Edit to enable the Appliance Name text box. Enter a new appliance name and click Save.

Host DNS Suffix

The host DNS suffix name.

The Appliance Administrator can modify the name. Click Edit to enable the Host DNS Suffix text box. Enter a new name and click Save.

Host

 The appliance network server IP address.
Appliance Version The version of the SPP Appliance.
Uptime The amount of time (hours and minutes) the appliance has been running.

Last Boot Date

The last date the appliance was booted up.

General tab information

Disk is a graphical display of the amount of used and free disk space. When the disk usage is over 80%, the log reflects: DiskUsageWarningEvent.

Table 7: General tab
Property Description
Manufacturer The system manufacturer.
Model The system model.
Bios Description The system bios description.
Bios Serial Number The system's bios serial number.
Serial Number The media access control address (MAC address) assigned to the network interface for communications.
Ship Date The appliance ship date.
Processor The processor information.
Virtual Memory The virtual memory allocation.
Physical Memory

The physical memory allocation.

TLS 1.2 only

Click this toggle to disable earlier versions of the Transport Layer Security (TLS) protocol and use only TLS v1.2.

NOTE: You must reboot your appliance after enabling TLS 1.2 only.

web client: enabled and disabled

Performance tab
Table 8: Performance tab
Property Description

Total CPU and Core_n

Displays the CPU information and the performance utilization of your appliance.
Memory Displays the memory usage of your appliance; what is currently in use and what is free.

Disk Space

Displays the disk space used and free.