Complete the following steps on the syslog-ng server:
Create an X.509 certificate for the syslog-ng server.
The subject_alt_name parameter (or the Common Name parameter if the subject_alt_name parameter is empty) of the server's certificate must contain the hostname or the IP address (as resolved from the syslog-ng clients and relays) of the server (for example, syslog-ng.example.com).
Alternatively, the Common Name or the subject_alt_name parameter can contain a generic hostname, for example, *.example.com.
Note that if the Common Name of the certificate contains a generic hostname, do not specify a specific hostname or an IP address in the subject_alt_name parameter.
Copy the certificate (for example, syslog-ng.cert) of the syslog-ng server to the syslog-ng server host, for example, into the /opt/syslog-ng/etc/syslog-ng/cert.d directory. The certificate must be a valid X.509 certificate in PEM format.
Copy the private key (for example, syslog-ng.key) matching the certificate of the syslog-ng server to the syslog-ng server host, for example, into the /opt/syslog-ng/etc/syslog-ng/key.d directory. The key must be in PEM format. If you want to use a password-protected key, see Password-protected keys.
Add a source statement to the syslog-ng configuration file that uses the tls( key-file(key_file_fullpathname) cert-file(cert_file_fullpathname) ) option and specify the key and certificate files. The source must use the source driver (network() or syslog()) matching the destination driver used by the syslog-ng client.
The following source receives log messages encrypted using TLS, arriving to the 1999/TCP port of any interface of the syslog-ng server.
source demo_tls_source { network(ip(0.0.0.0) port(1999) transport("tls") tls( key-file("/opt/syslog-ng/etc/syslog-ng/key.d/syslog-ng.key") cert-file("/opt/syslog-ng/etc/syslog-ng/cert.d/syslog-ng.cert") ) ); };
A similar source for receiving messages using the IETF-syslog protocol:
source demo_tls_syslog_source { syslog(ip(0.0.0.0) port(1999) transport("tls") tls( key-file("/opt/syslog-ng/etc/syslog-ng/key.d/syslog-ng.key") cert-file("/opt/syslog-ng/etc/syslog-ng/cert.d/syslog-ng.cert") ) ); };
Disable mutual authentication for the source by setting the following TLS option in the source statement: tls( peer-verify(optional-untrusted);
If you want to authenticate the clients, you have to configure mutual authentication. For details, see Mutual authentication using TLS.
For the details of the available tls() options, see TLS options.
The following source receives log messages encrypted using TLS, arriving to the 1999/TCP port of any interface of the syslog-ng server. The identity of the syslog-ng client is not verified.
source demo_tls_source { network( ip(0.0.0.0) port(1999) transport("tls") tls( key-file("/opt/syslog-ng/etc/syslog-ng/key.d/syslog-ng.key") cert-file("/opt/syslog-ng/etc/syslog-ng/cert.d/syslog-ng.cert") peer-verify(optional-untrusted) ) ); };
A similar source for receiving messages using the IETF-syslog protocol:
source demo_tls_syslog_source { syslog( ip(0.0.0.0) port(1999) transport("tls") tls( key-file("/opt/syslog-ng/etc/syslog-ng/key.d/syslog-ng.key") cert-file("/opt/syslog-ng/etc/syslog-ng/cert.d/syslog-ng.cert") peer-verify(optional-untrusted) ) ); };
|
Caution:
Do not forget to update the certificate and key files when they expire. |
This section describes how to configure mutual authentication between the syslog-ng server and the client. Configuring mutual authentication is similar to configuring TLS (for details, see Encrypting log messages with TLS), but the server verifies the identity of the client as well. Therefore, each client must have a certificate, and the server must have the certificate of the CA that issued the certificate of the clients. For the concepts of using TLS in syslog-ng, see Secure logging using TLS.
Complete the following steps on every syslog-ng client host. Examples are provided using both the legacy BSD-syslog protocol (using the network() driver) and the new IETF-syslog protocol standard (using the syslog() driver):
Create an X.509 certificate for the syslog-ng client.
Copy the certificate (for example, client_cert.pem) and the matching private key (for example, client.key) to the syslog-ng client host, for example, into the /opt/syslog-ng/etc/syslog-ng/cert.d directory. The certificate must be a valid X.509 certificate in PEM format. If you want to use a password-protected key, see Password-protected keys.
Copy the CA certificate of the Certificate Authority (for example, cacert.pem) that issued the certificate of the syslog-ng server (or the self-signed certificate of the syslog-ng server) to the syslog-ng client hosts, for example, into the /opt/syslog-ng/etc/syslog-ng/ca.d directory.
Issue the following command on the certificate: openssl x509 -noout -hash -in cacert.pem The result is a hash (for example, 6d2962a8), a series of alphanumeric characters based on the Distinguished Name of the certificate.
Issue the following command to create a symbolic link to the certificate that uses the hash returned by the previous command and the .0 suffix.
ln -s cacert.pem 6d2962a8.0
Add a destination statement to the syslog-ng configuration file that uses the tls( ca-dir(path_to_ca_directory) ) option and specify the directory using the CA certificate. The destination must use the network() or the syslog() destination driver, and the IP address and port parameters of the driver must point to the syslog-ng server. Include the client's certificate and private key in the tls() options.
The following destination encrypts the log messages using TLS and sends them to the 1999/TCP port of the syslog-ng server having the 10.1.2.3 IP address. The private key and the certificate file authenticating the client is also specified.
destination demo_tls_destination { network( "10.1.2.3" port(1999) transport("tls") tls( ca-dir("/opt/syslog-ng/etc/syslog-ng/ca.d") key-file("/opt/syslog-ng/etc/syslog-ng/key.d/client.key") cert-file("/opt/syslog-ng/etc/syslog-ng/cert.d/client_cert.pem") ) ); };
destination demo_tls_syslog_destination { syslog( "10.1.2.3" port(1999) transport("tls") tls( ca-dir("/opt/syslog-ng/etc/syslog-ng/ca.d") key-file("/opt/syslog-ng/etc/syslog-ng/key.d/client.key") cert-file("/opt/syslog-ng/etc/syslog-ng/cert.d/client_cert.pem") ) ); };
Include the destination created in Step 2 in a log statement.
|
Caution:
The encrypted connection between the server and the client fails if the Common Name or the subject_alt_name parameter of the server certificate does not the hostname or the IP address (as resolved from the syslog-ng clients and relays) of the server. Do not forget to update the certificate files when they expire. |
Complete the following steps on the syslog-ng server:
Copy the certificate (for example, syslog-ng.cert) of the syslog-ng server to the syslog-ng server host, for example, into the /opt/syslog-ng/etc/syslog-ng/cert.d directory. The certificate must be a valid X.509 certificate in PEM format.
Copy the CA certificate (for example, cacert.pem) of the Certificate Authority that issued the certificate of the syslog-ng clients to the syslog-ng server, for example, into the /opt/syslog-ng/etc/syslog-ng/ca.d directory.
Issue the following command on the certificate: openssl x509 -noout -hash -in cacert.pem The result is a hash (for example, 6d2962a8), a series of alphanumeric characters based on the Distinguished Name of the certificate.
Issue the following command to create a symbolic link to the certificate that uses the hash returned by the previous command and the .0 suffix.
ln -s cacert.pem 6d2962a8.0
Copy the private key (for example, syslog-ng.key) matching the certificate of the syslog-ng server to the syslog-ng server host, for example, into the /opt/syslog-ng/etc/syslog-ng/key.d directory. The key must be in PEM format. If you want to use a password-protected key, see Password-protected keys.
Add a source statement to the syslog-ng configuration file that uses the tls( key-file(key_file_fullpathname) cert-file(cert_file_fullpathname) ) option and specify the key and certificate files. The source must use the source driver (network() or syslog()) matching the destination driver used by the syslog-ng client. Also specify the directory storing the certificate of the CA that issued the client's certificate.
For the details of the available tls() options, see TLS options.
The following source receives log messages encrypted using TLS, arriving to the 1999/TCP port of any interface of the syslog-ng server.
source demo_tls_source { network( ip(0.0.0.0) port(1999) transport("tls") tls( key-file("/opt/syslog-ng/etc/syslog-ng/key.d/syslog-ng.key") cert-file("/opt/syslog-ng/etc/syslog-ng/cert.d/syslog-ng.cert") ca-dir("/opt/syslog-ng/etc/syslog-ng/ca.d") ) ); };
A similar source for receiving messages using the IETF-syslog protocol:
source demo_tls_syslog_source { syslog( ip(0.0.0.0) port(1999) transport("tls") tls( key-file("/opt/syslog-ng/etc/syslog-ng/key.d/syslog-ng.key") cert-file("/opt/syslog-ng/etc/syslog-ng/cert.d/syslog-ng.cert") ca-dir("/opt/syslog-ng/etc/syslog-ng/ca.d") ) ); };
|
Caution:
Do not forget to update the certificate and key files when they expire. |
© ALL RIGHTS RESERVED. Feedback 이용 약관 개인정보 보호정책 Cookie Preference Center