Network Level Authentication (NLA) with domain membership
You can use Credential Security Service Provider (CredSSP, also called Network Level Authentication or NLA) when One Identity Safeguard for Privileged Sessions (SPS) is member of the domain.
To use NLA with domain membership
-
Navigate to RDP Control > Settings, and select the RDP settings policy that you use in your connection policies.
-
Select the Enable Network Level Authentication > Require domain membership option.
-
Navigate to RDP Control > Domain membership.
-
Enter the name of the domain (for example mydomain) into the Domain field.
Figure 220: RDP Control > Domain membership — Joining a domain
-
Enter the name of the realm (for example mydomain.example.com) into the Full domain name field.
NOTE: Ensure that your DNS settings are correct and that the full domain name can be resolved from SPS. To check this, navigate to Basic Settings > Troubleshooting > Ping, enter the full domain name into the Hostname field, and select Ping host.
-
Click 
.
-
Click Join domain. A pop-up window is displayed.
-
SPS requires an account to your domain to be able to join the domain. Enter the following information:
-
The name of the user into the Username field.
-
The password into the Password field.
NOTE: SPS accepts passwords that are not longer than 150 characters and supports the following characters:
-
The name of your domain controller into the Domain controller field. If you leave this field blank, SPS tries to find the domain controller automatically.
NOTE: Ensure that your DNS settings are correct and that the hostname of the domain controller can be resolved from SPS. To check this, navigate to Basic Settings > Troubleshooting > Ping, enter the name of the domain controller into the Hostname field, and select Ping host.
-
The organizational unit (OU) into the Organization unit field.
The OU string reads from top to bottom without RDNs, and is delimited by a '/'. Note that '\' is used for escape by both the shell and ldap, so it may need to be doubled or quadrupled to pass through, and it is not used as a delimiter.
-
Click Join domain.
-
If successful, SPS displays the name of the domain it joined.
NOTE: If you need SPS to leave the domain for some reason, click Leave domain.
Using One Identity Safeguard for Privileged Sessions (SPS) across multiple domains
If your users are in a domain (EXAMPLE-DOMAIN), One Identity Safeguard for Privileged Sessions (SPS) is also in that domain (EXAMPLE-DOMAIN), but your users need to access servers that are in a different domain (OTHER-DOMAIN), you must establish a level of trust between the domains. This is summarized in the following table.
| EXAMPLE-DOMAIN\myusername |
EXAMPLE-DOMAIN |
Connection is established |
| EXAMPLE-DOMAIN\myusername |
OTHER-DOMAIN |
If OTHER-DOMAIN trusts EXAMPLE-DOMAIN, the connection is established |
| OTHER-DOMAIN\myusername |
OTHER-DOMAIN |
If two-way trust is established between OTHER-DOMAIN and EXAMPLE-DOMAIN, the connection is established |
| OTHER-DOMAIN\myusername |
EXAMPLE-DOMAIN |
If two-way trust is established between OTHER-DOMAIN and EXAMPLE-DOMAIN, the connection is established |
NOTE: If you use an LDAP database when using SPS accross multiple domains, LDAP will only use the username without the domain name to verify the group membership.
Verifying the certificate of the RDP server in encrypted connections
By default, One Identity Safeguard for Privileged Sessions (SPS) accepts any certificate shown by the server. This section describes how to accept only verified certificates.
To accept only verified certificates
-
Create a list of trusted CA certificates that you will use to verify the certificate of the server. For details, see Verifying certificates with Certificate Authorities.
-
Navigate to RDP Control > Connections and select the connection policy to modify.
-
Select TLS.
-
Select the required option under Server certificate validation.
You have the following options:
NOTE: The Only accept certificates authenticated by the trusted CA list. option has no effect if the session uses Network Level Authentication, because in such cases SPS uses a different method to validate the server certificate.
If you use Network Level Authentication (NLA, also called CredSSP), there is no verification performed in the TLS layer due to the TLS session-binding. For more information on TLS session-binding, see section [MS-CSSP]: Credential Security Support Provider (CredSSP) Protocol in the Microsoft documentation.
Figure 221: RDP Control > Connections — Using SSL-encryption in RDP connections
-
(Optional) If you selected Only accept certificates authenticated by the trusted CA list., in Trusted CA list, select the CA list to use for verifying the certificate of the server.
-
Click Commit.
-
(Optional) Configure your Windows servers to display a certificate signed with the above Certificate Authority for incoming RDP connections. To do this, complete the following steps:
-
Generate a certificate that contains the IP address or the hostname of the target server in its Common Name (CN) field and sign it with the Certificate Authority whose certificate you added to the Trusted CA list of SPS.
-
Convert the signed certificate of the target server to PKCS12 format that includes the private key.
-
Start the Microsoft Management Console (MMC) on the target server and select Add Snap-in > Certificates > Computer Account.
-
Right-click the Personal store, then select All Tasks > Import, and select the certificate created for the server.
-
Complete the Certificate Import Wizard, but do not select the Extended certificate properties option.
-
Select Start > Administrative tools > Remote Desktop > Remote Desktop Session Host Configuration.
-
Right-click the connection you want to configure and select Properties > General.
-
Set the Security layer to SSL.
-
Click Certificate > Select and select the imported certificate. The server uses this certificate to verify its identity for the incoming RDP connections.
Enabling TLS-encryption for RDP connections
To enable TLS-encryption in an RDP connection policy, you have two options:
Prerequisites
Depending on your requirements, you might need one or more of the following:
-
To use the same certificate for each session, an X.509 certificate and its private key are required. One Identity Safeguard for Privileged Sessions (SPS) can display this certificate to the peers on the client side. Use your own PKI system to generate these certificates, as they cannot be created on SPS.
NOTE: The Common Name of the certificate must contain the domain name or the IP address of target machine, otherwise the clients might reject the certificate.
-
To generate certificates on-the-fly for a connection, you need a signing certificate authority. For details on creating a signing CA, see Signing certificates on-the-fly.
TIP: One Identity recommends using 2048-bit RSA keys (or stronger).
To configure TLS-encryption
-
Navigate to RDP Control > Connections and select the connection policy in which you want to enable TLS.
Figure 222: RDP Control > Connections — Enabling TLS-encryption for RDP connections
-
Set the encryption settings used between the client/server and SPS in the Transport security settings section.
To require encryption, select TLS. When the connection is encrypted, SPS has to show a certificate to the peer.
-
Select the certificate to show to the peers.
-
If you want to enable TLS-encryption, but you do not have a certificate that is generated by an external CA, or a signing CA, select Generate self-signed certificate. By default, this option is selected.
-
To use the same certificate for every peer, complete the following steps.
-
Generate and sign a certificate for SPS in your PKI system, and export the certificate and its private key.
-
Select Use the same certificate for each connection.
-
Select Private key for host certificate, click 
and upload the private key.
-
Select X.509 host certificate, click and upload the certificate.
-
If you want to use your own Signing CA, complete the following steps.
-
Create a certificate authority that is used to sign the certificates that SPS shows to the peer. For details, see Signing certificates on-the-fly.
-
Select Generate certificate on-the-fly.
-
In the Signing CA field, select the certificate authority to use.
NOTE: Import the certificate of the signing Certificate Authority to your clients. Otherwise, the client applications will display a warning because of the unknown Certificate Authority.
-
To disable TLS-encryption for RDP connections completely, select Legacy RDP Security Layer (also known as: Standard RDP Security). You might want to do this if you were using legacy RDP encryption, and you are experiencing compatibility issues. For example, you might experience a compatibility issue if you attempt to connect to a very old Windows machine (for example, Windows Server 2003 or older).
-
(Optional) Even if you choose TLS-encryption, you have the option to choose using legacy RDP encryption as well. If you experience compatibility issues (for example, if you attempt to connect to a very old Windows machine, such as Windows Server 2003 or older) and want to allow using legacy RDP encryption if TLS-encryption is not possible, select Allow fallback to legacy RDP Security Layer (also known as: Standard RDP Security).
|
|
Caution: Security Hazard!
Selecting the Legacy RDP Security Layer or the Allow fallback to legacy RDP Security Layer options can significantly reduce the strength of the encryption used.
Selecting these options is only recommended if you cannot overcome compatibility issues in any other way.
To avoid security hazard, we recommend using TLS encryption. |
-
Click Commit.
Expected result
The encryption settings are applied to the connection policy.
