지금 지원 담당자와 채팅
지원 담당자와 채팅

One Identity Safeguard for Privileged Passwords 6.0.10 LTS - User Guide

Supported platforms

One Identity Safeguard for Privileged Passwords supports a variety of platforms, including custom platforms.

Safeguard for Privileged Passwords tested platforms

The following table lists the platforms and versions that have been tested for Safeguard for Privileged Passwords (SPP). Additional assets may be added to Safeguard for Privileged Passwords. If you do not see a particular platform listed when adding an asset, use the Other, Other Managed, or Other Linux selection on the Management tab of the Asset dialog.

SPP joined to SPS: Sessions platforms

When Safeguard for Privileged Passwords (SPP) is joined with a Safeguard for Privileged Sessions (SPS) appliance, platforms are supported that use one of these protocols:

• SPP 2.8 or lower: RDP, SSH

• SPP 2.9 or higher: RDP, SSH, or Telnet

Some platforms may support more than one protocol. For example, a Linux (or Linux variation) platform supports both SSH and Telnet protocols.

Supported platform updates

For all supported platforms, it is assumed that the latest updates are applied.

Table 5: Supported platforms: Assets that can be managed
Platform Version Architecture (all versions unless noted)

Supports SPP

Supports SPS Access

ACF2 - Mainframe

r14, r15

zSeries

True

True

ACF2 - Mainframe LDAP

r14, r15

zSeries

True

False

Active Directory

 

 

True

False

AIX

6.1, 7.1, 7.2

PPC

True

True

Amazon Linux

2

x86_64

True

True

Amazon Web Services (AWS)

 1  

True

False

CentOS Linux

6

7

(ver 6) x86, x86_64

(ver 7) x86_64

True

True

Cisco ASA

7.x, 8.x

 

True

True

Cisco IOS 12.X, 15.X  

True

True

Debian GNU/Linux

6, 7, 8, 9

x86, x86_64, MIPS, PPC, zSeries

True

True

Dell iDRAC

7, 8

  

True

True

ESXi (VSphere)

5.5, 6.0, 6.5, 6.7

 

True

False

F5 Big-IP

12.1.2, 13.0, 14.0

  

True

True

Fedora

21, 22, 23, 24, 25, 26, 27, 28, 29, 30

x86, x86_64

True

True

Fortinet FortiOS

5.2, 5.6

  

True

True

FreeBSD

10.4, 11.1, 11.2

x86, x86_64

True

True

HP iLO

2, 3, 4

x86

True

True

HP iLO MP

2, 3

IA-64

True

True

HP-UX

11iv2 (B.11.23),
11iv3 (B.11.31)

PA-RISC, IA-64

True

True

IBM i (formerly AS/400)

7.1, 7.2, 7.3

PPC

True

True

Junos - Juniper Networks

12, 13, 14, 15

  

True

True

macOS

10.9, 10.10, 10.11, 10.12, 10.13

x86_64

True

True

MongoDB

3.4, 3.6, 4.0

  

True

False

MySQL

 5.6, 5.7  

True

False

OpenLDAP

2.4

 

True

False

Oracle

11g Release 2,
12c Release 1		  

True

False

Oracle Linux (OEL)

6

7

(ver 6) x86, x86_64

(ver 7) x86_64

True

True

Other

 

 

False

False

Other Linux

 

 

True

True

Other Managed

 

 

True

False

PAN-OS

6.0, 7.0, 8.0, 8.1

  

True

True

PostgreSQL

9.6, 10.2, 10.3, 10.4, 10.5

 

True

False

RACF - Mainframe

z/OS V2.1 Security Server,
z/OS V2.2 Security Server

 zSeries

True

True

RACF - Mainframe LDAP

 z/OS V2.1 Security Server,
z/OS V2.2 Security Server

zSeries

True

False

Red Hat Enterprise Linux (RHEL)

6, 7, 8

(ver 6) x86, x86_64, PPC, zSeries

(ver 7 and 8) x86, x86_64, PPC, zSeries

True

True

SAP HANA

2.0

Other

True

False

SAP Netweaver Application Server

7.3, 7.4, 7.5

  

True

False

Solaris

10, 11

(ver 10) SPARC, x86, x86_64

(ver 11) SPARC, x86_64

True

True

SonicOS

5.9, 6.2

  

True

False

SonicWALL SMA or CMS

11.3.0

  

True

False

SQL Server

2012, 2014, 2016, 2017, 2019

  

True

False

SUSE Linux Enterprise Server (SLES)

11

12

(ver 11) x86, x86_64, PPC, zSeries, IA-64

(ver 12) x86_64, PPC, zSeries

True

True

Sybase (Adaptive Server Enterprise)

15.7, 16

  

True

False

Top Secret - Mainframe

r14, r15

zSeries

True

True

Top Secret - Mainframe LDAP

r14, r15

zSeries

True

False

Ubuntu

14.04 LTS, 15.04, 15.10, 16.04 LTS, 16.10, 17.04, 17.10, 18.04 LTS, 18.10, 19.04

x86, x86_64

True

True

Windows

Vista, 7, 8, 8.1, 10 Enterprise (including LTSC and loT).

 

True

True

Windows Server

2008, 2008 R2, 2012, 2012 R2, 2016, 2019

  

True

True

Windows SSH

7, 8, 8.1, 10

Server 2008 R2, 2012, 2012 R2, 2016, 2019

Windows SSH Other

 

True

True

Table 6: Supported platforms: Directories that can be searched
Platform Version

Microsoft Active Directory

Windows 2008+ DFL/FFL

OpenLDAP

2.4

For all supported platforms, it is assume that you are applying the latest updates. For unpatched versions of supported platforms, Support will investigate and assist on a case by case basis but it may be necessary for you to upgrade the platform or use SPP's custom platform feature.

Custom platforms

The following example platform scripts are available:

  • Custom HTTP
  • Linux SSH
  • Telnet
  • TN3270 transports are available

For more information, see Custom platforms and Creating a custom platform script in the Safeguard for Privileged Passwords Administration Guide.

CAUTION: Facebook and Twitter functionality has been deprecated. Refer to the custom platform open source script provided on GitHub. Facebook and Twitter platforms will be remove in a future release.

Sample custom platform scripts and command details are available at the following links available from the Safeguard Custom Platform Home wiki on GitHub:

CAUTION: Example scripts are provided for information only. Updates, error checking, and testing are required before using them in production. Safeguard for Privileged Passwords checks to ensure the values match the type of the property that include a string, boolean, integer, or password (which is called secret in the API scripts). Safeguard for Privileged Passwords cannot check the validity or system impact of values entered for custom platforms.

License: hardware, virtual, expiration

One Identity Safeguard for Privileged Passwords is made up of a core set of features, such as the UI and Web Services layers, and a number of modules.

Hardware appliance

The One Identity Safeguard for Privileged Passwords 3000 Appliance and 2000 Appliance ship with the following module which requires a valid license to enable functionality:

  • Privileged Passwords

You must install a valid license for each Safeguard for Privileged Passwords module to operate. More specifically, if any module is installed, Safeguard for Privileged Passwords will show a license state of Licensed and is operational. However, depending on which models are licensed, you will see limited functionality. That is, even though you will be able to configure access requests:

  • If a Privileged Passwords module license is not installed, you will not be able to request a password release.

Virtual appliance licensing

You must license the virtual appliance with a Microsoft Windows license. We recommend using either the MAK or KMS method. Specific questions about licensing should be directed to your Sales Representative.

Privileged sessions is available via a join to Safeguard for Privileged Sessions.

The virtual appliance will not function unless the operating system is properly licensed.

As a Safeguard for Privileged Passwords user, if you get an "appliance is unlicensed" notification, contact your Appliance Administrator.

Long Term Support (LTS) and Feature Releases

Releases use the following version designations:

  • Long Term Support (LTS) Releases: The first digit identifies the release and the second is a zero (for example, 6.0 LTS).
  • Maintenance LTS Releases: A third digit is added followed by LTS (for example, 6.0.6 LTS).
  • Feature Releases: The Feature Releases are two digits (for example, 6.6).

Customers choose between two paths for receiving releases: Long Term Support (LTS) Release or Feature Release. See the following table for details.

Table 7: Comparison of Long Term Support (LTS) Release and Feature Release
  Long Term Support (LTS) Release Feature Release
Release frequency

Frequency: Typically, every 2 years

Scope: Includes new features, resolved issues and security updates

Versioning: The first digit identifies the LTS and the second digit is a 0 (for example, 6.0 LTS, 7.0 LTS, and so on).

Frequency: Typically, every 3 months

Scope: Includes the latest features, resolved issues, and other updates, such as security patches for the OS

Versioning: The first digit identifies the LTS and the second digit is a number identifying the Feature Release (for example, 6.6, 6.7, and so on).

Maintenance Release

Frequency:Typically, every 3 months during full support

Scope: Includes critical resolved issues

Versioning: A third digit designates the maintenance LTS Release (for example, 6.0.6 LTS).

Frequency:Only for highly critical issues

Scope: Includes highly critical resolved issues

Versioning: A third digit designates the maintenance Feature Release (for example, 6.6.1).

Support

Typically 3 years after the original publication date or until the next LTS is published (whichever date is later)

Typically 6 months after the original publication date or until the next feature or LTS Release is published (whichever date is later)

Release details can be found at Product Life Cycle.

CAUTION: Downgrading from the latest Feature Release, even to an LTS release, voids support for SPP.

One Identity strongly recommends always installing the latest revision of the release path you use (Long Term Support path or Feature Release path).

Moving between LTS and Feature Release versions

You can move from an LTS version (for example, 6.0.7 LTS) to the same feature version (6.7) and then patch to a later feature version. After that, you can patch from the minimum version for the patch, typically N-3. If you move from an LTS version to a feature version, you will receive a warning like the following which informs you that you will only be able to apply a Feature Release until the next LTS Release:

Warning: You are patching to a Feature Release from an LTS Release. If you apply this update, you will not be able to upgrade to a non-Feature Release until the next LTS major release version is available. See the Administration Guide for details.

You cannot move from a Feature Release to LTS Release. For example, you cannot move from 6.7 to 6.0.7 LTS. You have to keep upgrading with each new Feature Release until the next LTS Release version is published. For this example, you would wait until 7.0 LTS is available.

Patching

You can only patch from a major version. For example, if you have version 6.6 and want to patch to 7.7, you must patch to 7.0 LTS and then apply 7.7.

An LTS major version of Safeguard for Privileged Passwords (SPP) will work with the same LTS major version of Safeguard for Privileged Sessions (SPS). For the best experience, it is recommended you keep both their SPP and SPS in sync on the latest and supported version.

Search box

Whether you are using the desktop client or web client, the search box can be used to filter the data being displayed. When you enter a text string into the search box, the results include items that have a string attribute that contains the text that was entered. This same basic search functionality is also available for many of the detail panes and selection dialogs, allowing you to filter the data displayed in the associated pane or dialog.

When searching for objects in the object lists, an attribute search functionality is also available where you can filter the results, based on a specific attribute. That is, the search term matches if the specified attribute contains the text. To perform an attribute search, click the icon to select the attribute to be searched.

Rules for using the search functionality:

  • Search strings are not case-sensitive. Exception: in the web client, the Approvals and Reviews searches are case sensitive.
  • Wild cards are not allowed.

  • Try using quotes and omitting quotes. As you use the product, you will become familiar with the search requirements for the search fields you frequent. Safeguard may perform a general search (for example, omits quotes) or a literal search (for example, includes quotes). Example scenarios follow:

    • On the Settings pane, search strings must be an exact match because a literal search is performed. Do not add quotes or underlines. For example, from the Settings pane, enter password rules to return Safeguard Access | Password Rules. If you enter "password rules" or password_rules, the following message is returned: No matches found.

    • On the Users pane search box:

      • A general search does not return anything if you use quotes because it uses a literal search (searches for the quotes). For example: searching for "ab_misc2" returns the message: There is nothing to show here.
      • You can use quotes in an attribute search if there are spaces in the search name. For example, entering the following in the search box Username: "ab_misc2" returns: AB_misc2.
  • When multiple search strings are included, all search criteria must be met in order for an object to be included in the results list.
  • When you combine a basic search and an attribute search, the order they are entered into the search box matters. The attribute searches can be in any order, but the basic search must come after the attribute searches.
  • In large environments, you will see a result number to tell you how many objects match the criteria; however, only the first 200 objects will be retrieved from the server. When you scroll down the list, more objects will be retrieved (paged) as needed.

To search for accounts

  1. Enter a text string in the Search box. As you type, the list displays items whose string attributes contain the text that was entered.

    Examples:

    • Enter T in the search box to search for items that contain the letter "T".
    • Enter sse to list all items that contain the string "sse," (such as "Asset")

    NOTE: The status bar along the bottom of the console shows the number of items returned.

  2. To clear the search criteria, click  Clear.

    When you clear the search criteria, the original list of objects are displayed.

You can also Search by attribute.

관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택