Chat now with support
Chat with Support

syslog-ng Open Source Edition 3.22 - Administration Guide

Preface Introduction to syslog-ng The concepts of syslog-ng Installing syslog-ng The syslog-ng OSE quick-start guide The syslog-ng OSE configuration file source: Read, receive, and collect log messages
How sources work default-network-drivers: Receive and parse common syslog messages internal: Collecting internal messages file: Collecting messages from text files wildcard-file: Collecting messages from multiple text files linux-audit: Collecting messages from Linux audit logs network: Collecting messages using the RFC3164 protocol (network() driver) nodejs: Receiving JSON messages from nodejs applications mbox: Converting local e-mail messages to log messages osquery: Collect and parse osquery result logs pipe: Collecting messages from named pipes pacct: Collecting process accounting logs on Linux program: Receiving messages from external applications python: writing server-style Python sources python-fetcher: writing fetcher-style Python sources snmptrap: Read Net-SNMP traps sun-streams: Collecting messages on Sun Solaris syslog: Collecting messages using the IETF syslog protocol (syslog() driver) system: Collecting the system-specific log messages of a platform systemd-journal: Collecting messages from the systemd-journal system log storage systemd-syslog: Collecting systemd messages using a socket tcp, tcp6, udp, udp6: Collecting messages from remote hosts using the BSD syslog protocol— OBSOLETE unix-stream, unix-dgram: Collecting messages from UNIX domain sockets stdin: Collecting messages from the standard input stream
destination: Forward, send, and store log messages
amqp: Publishing messages using AMQP collectd: sending metrics to collectd elasticsearch2: Sending messages directly to Elasticsearch version 2.0 or higher (DEPRECATED) elasticsearch-http: Sending messages to Elasticsearch HTTP Bulk API file: Storing messages in plain-text files graphite: Sending metrics to Graphite Sending logs to Graylog hdfs: Storing messages on the Hadoop Distributed File System (HDFS) Posting messages over HTTP http: Posting messages over HTTP without Java kafka: Publishing messages to Apache Kafka (Java implementation) kafka: Publishing messages to Apache Kafka (C implementation, using the librdkafka client) loggly: Using Loggly logmatic: Using Logmatic.io mongodb: Storing messages in a MongoDB database network: Sending messages to a remote log server using the RFC3164 protocol (network() driver) osquery: Sending log messages to osquery's syslog table pipe: Sending messages to named pipes program: Sending messages to external applications pseudofile() python: writing custom Python destinations redis: Storing name-value pairs in Redis riemann: Monitoring your data with Riemann slack: Sending alerts and notifications to a Slack channel smtp: Generating SMTP messages (e-mail) from logs snmp: Sending SNMP traps Splunk: Sending log messages to Splunk sql: Storing messages in an SQL database stomp: Publishing messages using STOMP syslog: Sending messages to a remote logserver using the IETF-syslog protocol syslog-ng: Forwarding messages and tags to another syslog-ng node tcp, tcp6, udp, udp6: Sending messages to a remote log server using the legacy BSD-syslog protocol (tcp(), udp() drivers) Telegram: Sending messages to Telegram unix-stream, unix-dgram: Sending messages to UNIX domain sockets usertty: Sending messages to a user terminal: usertty() destination Write your own custom destination in Java or Python Client-side failover
log: Filter and route log messages using log paths, flags, and filters Global options of syslog-ng OSE TLS-encrypted message transfer template and rewrite: Format, modify, and manipulate log messages parser: Parse and segment structured messages db-parser: Process message content with a pattern database (patterndb) Correlating log messages Enriching log messages with external data Statistics of syslog-ng Multithreading and scaling in syslog-ng OSE Troubleshooting syslog-ng Best practices and examples The syslog-ng manual pages Creative Commons Attribution Non-commercial No Derivatives (by-nc-nd) License

smtp: Generating SMTP messages (e-mail) from logs

The destination is aimed at a fully controlled local, or near-local, trusted SMTP server. The goal is to send mail to trusted recipients, through a controlled channel. It hands mails over to an SMTP server, and that is all it does, therefore the resulting solution is as reliable as sending an e-mail in general. For example, syslog-ng OSE does not verify whether the recipient exists.

The smtp() driver sends e-mail messages triggered by log messages. The smtp() driver uses SMTP, without needing external applications. You can customize the main fields of the e-mail, add extra headers, send the e-mail to multiple recipients, and so on.

The subject(), body(), and header() fields may include macros which get expanded in the e-mail. For more information on available macros see Macros of syslog-ng OSE.

The smtp() driver has the following required parameters: host(), port(), from(), to(), subject(), and body(). For the list of available optional parameters, see smtp() destination options.

NOTE:

The smtp() destination driver is available only in syslog-ng OSE 3.4 and later.

Declaration:
smtp(host() port() from() to() subject() body() options());
Example: Using the smtp() driver

The following example defines an smtp() destination using only the required parameters.

destination d_smtp {
    smtp(
        host("localhost")
        port(25)
        from("syslog-ng alert service" "noreply@example.com")
        to("Admin #1" "admin1@example.com")
        subject("[ALERT] Important log message of $LEVEL condition received from $HOST/$PROGRAM!")
        body("Hi!\nThe syslog-ng alerting service detected the following important log message:\n $MSG\n-- \nsyslog-ng\n")
    );
};

The following example sets some optional parameters as well.

destination d_smtp {
    smtp(
        host("localhost")
        port(25)
        from("syslog-ng alert service" "noreply@example.com")
        to("Admin #1" "admin1@example.com")
        to("Admin #2" "admin2@example.com")
        cc("Admin BOSS" "admin.boss@example.com")
        bcc("Blind CC" "blindcc@example.com")
        subject("[ALERT] Important log message of $LEVEL condition received from $HOST/$PROGRAM!")
        body("Hi!\nThe syslog-ng alerting service detected the following important log message:\n $MSG\n-- \nsyslog-ng\n")
        header("X-Program", "$PROGRAM")
        );
};
Example: Simple e-mail alerting with the smtp() driver

The following example sends an e-mail alert if the eth0 network interface of the host is down.

filter f_linkdown {
    match("eth0: link down" value("MESSAGE"));
};
destination d_alert {
    smtp(
        host("localhost") port(25)
        from("syslog-ng alert service" "syslog@localhost")
        reply-to("Admins" "root@localhost")
        to("Ennekem" "me@localhost")
        subject("[SYSLOG ALERT]: eth0 link down")
        body("Syslog received an alert:\n$MSG")
        );
};

log {
    source(s_local);
    filter(f_linkdown);
    destination(d_alert);
};

smtp() destination options

The smtp() sends e-mail messages using SMTP, without needing external applications. The smtp() destination has the following options:

body()
Type: string
Default: n/a

Description: The BODY field of the e-mail. You can also use macros in the string. Use \n to start a new line. For example:

body("syslog-ng OSE received the following alert from $HOST:\n$MSG")
bcc()
Type: string
Default: n/a

Description: The BCC recipient of the e-mail (contents of the BCC field). You can specify the e-mail address, or the name and the e-mail address. Set the bcc() option multiple times to send the e-mail to multiple recipients. For example: bcc("admin@example.com") or bcc("Admin" "admin@example.com") or bcc("Admin" "admin@example.com") bcc("Admin2" "admin2@example.com")

You can also use macros to set the value of this parameter.

cc()
Type: string
Default: n/a

Description: The CC recipient of the e-mail (contents of the CC field). You can specify the e-mail address, or the name and the e-mail address. Set the cc() option multiple times to send the e-mail to multiple recipients. For example: cc("admin@example.com") or cc("Admin" "admin@example.com") or cc("Admin" "admin@example.com") cc("Admin2" "admin2@example.com")

You can also use macros to set the value of this parameter.

disk-buffer()

Description: This option enables putting outgoing messages into the disk buffer of the destination to avoid message loss in case of a system failure on the destination side. It has the following options:

reliable()
Type: yes|no
Default: no

Description: If set to yes, syslog-ng OSE cannot lose logs in case of reload/restart, unreachable destination or syslog-ng OSE crash. This solution provides a slower, but reliable disk-buffer option. It is created and initialized at startup and gradually grows as new messages arrive. If set to no, the normal disk-buffer will be used. This provides a faster, but less reliable disk-buffer option.

Caution:

Hazard of data loss! If you change the value of reliable() option when there are messages in the disk-buffer, the messages stored in the disk-buffer will be lost.

dir()
Type: string
Default: N/A

Description: Defines the folder where the disk-buffer files are stored.

Caution:

When creating a new dir() option for a disk buffer, or modifying an existing one, make sure you delete the persist file.

syslog-ng OSE creates disk-buffer files based on the path recorded in the persist file. Therefore, if the persist file is not deleted after modifying the dir() option, then following a restart, syslog-ng OSE will look for or create disk-buffer files in their old location. To ensure that syslog-ng OSE uses the new dir() setting, the persist file must not contain any information about the destinations which the disk-buffer file in question belongs to.

disk-buf-size()
Type: number (bytes)
Default:

Description: This is a required option. The maximum size of the disk-buffer in bytes. The minimum value is 1048576 bytes. If you set a smaller value, the minimum value will be used automatically. It replaces the old log-disk-fifo-size() option.
mem-buf-length()
Type: number (messages)
Default: 10000
Description: Use this option if the option reliable() is set to no. This option contains the number of messages stored in overflow queue. It replaces the old log-fifo-size() option. It inherits the value of the global log-fifo-size() option if provided. If it is not provided, the default value is 10000 messages. Note that this option will be ignored if the option reliable() is set to yes.
mem-buf-size()
Type: number (bytes)
Default: 163840000
Description: Use this option if the option reliable() is set to yes. This option contains the size of the messages in bytes that is used in the memory part of the disk buffer. It replaces the old log-fifo-size() option. It does not inherit the value of the global log-fifo-size() option, even if it is provided. Note that this option will be ignored if the option reliable() is set to no.
qout-size()
Type: number (messages)
Default: 64
Description: The number of messages stored in the output buffer of the destination. Note that if you change the value of this option and the disk-buffer already exists, the change will take effect when the disk-buffer becomes empty.

Options reliable() and disk-buf-size() are required options.

Example: Examples for using disk-buffer()

In the following case reliable disk-buffer() is used.

destination d_demo {
    network(
        "127.0.0.1"
        port(3333)
        disk-buffer(
            mem-buf-size(10000)
            disk-buf-size(2000000)
            reliable(yes)
            dir("/tmp/disk-buffer")
        )
    );
};

In the following case normal disk-buffer() is used.

destination d_demo {
    network(
        "127.0.0.1"
        port(3333)
           disk-buffer(
            mem-buf-length(10000)
            disk-buf-size(2000000)
            reliable(no)
            dir("/tmp/disk-buffer")
        )
    );
};
batch-bytes()
Accepted values: number [bytes]
Default: none

Description: Sets the maximum size of payload in a batch. If the size of the messages reaches this value, syslog-ng OSE sends the batch to the destination even if the number of messages is less than the value of the batch-lines() option.

Note that if the batch-timeout() option is enabled and the queue becomes empty, syslog-ng OSE flushes the messages only if batch-timeout() expires, or the batch reaches the limit set in batch-bytes().

Available in syslog-ng OSE version 3.19 and later.

batch-lines()
Type: number
Default: 1

Description: Specifies how many lines are flushed to a destination in one batch. The syslog-ng OSE application waits for this number of lines to accumulate and sends them off in a single batch. Increasing this number increases throughput as more messages are sent in a single batch, but also increases message latency.

For example, if you set batch-lines() to 100, syslog-ng OSE waits for 100 messages.

If the batch-timeout() option is disabled, the syslog-ng OSE application flushes the messages if it has sent batch-lines() number of messages, or the queue became empty. If you stop or reload syslog-ng OSE or in case of network sources, the connection with the client is closed, syslog-ng OSE automatically sends the unsent messages to the destination.

Note that if the batch-timeout() option is enabled and the queue becomes empty, syslog-ng OSE flushes the messages only if batch-timeout() expires, or the batch reaches the limit set in batch-lines().

For optimal performance, make sure that the syslog-ng OSE source that feeds messages to this destination is configured properly: the value of the log-iw-size() option of the source must be higher than the batch-lines()*workers() of the destination. Otherwise, the size of the batches cannot reach the batch-lines() limit.

batch-timeout()
Type: time in milliseconds
Default: -1 (disabled)

Description: Specifies the time syslog-ng OSE waits for lines to accumulate in the output buffer. The syslog-ng OSE application sends batches to the destinations evenly. The timer starts when the first message arrives to the buffer, so if only few messages arrive, syslog-ng OSE sends messages to the destination at most once every batch-timeout() milliseconds.

from()
Type: string
Default: n/a

Description: The sender of the e-mail (contents of the FROM field). You can specify the e-mail address, or the name and the e-mail address. For example:

from("admin@example.com")
or
from("Admin" "admin@example.com")

If you specify the from() option multiple times, the last value will be used. Instead of the from() option, you can also use sender(), which is just an alias of the from() option.

You can also use macros to set the value of this parameter.

header()
Type: string
Default: n/a

Description: Adds an extra header to the e-mail with the specified name and content. The first parameter sets the name of the header, the second one its value. The value of the header can contain macros. Set the header() option multiple times to add multiple headers. For example:

header("X-Program", "$PROGRAM")

When using the header option, note the following points:

  • Do not use the header() option to set the values of headers that have dedicated options. Use it only to add extra headers.

  • If you set the same custom header multiple times, only the first will be added to the e-mail, other occurrences will be ignored.

  • It is not possible to set the DATE, Return-Path, Original-Recipient, Content-*, MIME-*, Resent-*, Received headers.

hook-commands()

Description: This option makes it possible to execute external programs when the relevant driver is initialized or torn down. The hook-commands() can be used with all source and destination drivers with the exception of the usertty() and internal() drivers.

NOTE: The syslog-ng OSE application must be able to start and restart the external program, and have the necessary permissions to do so. For example, if your host is running AppArmor or SELinux, you might have to modify your AppArmor or SELinux configuration to enable syslog-ng OSE to execute external applications.

Using the hook-commands() when syslog-ng OSE starts or stops

To execute an external program when syslog-ng OSE starts or stops, use the following options:

startup()
Type: string
Default: N/A

Description: Defines the external program that is executed as syslog-ng OSE starts.

shutdown()
Type: string
Default: N/A

Description: Defines the external program that is executed as syslog-ng OSE stops.

Using the hook-commands() when syslog-ng OSE reloads

To execute an external program when the syslog-ng OSE configuration is initiated or torn down, for example, on startup/shutdown or during a syslog-ng OSE reload, use the following options:

setup()
Type: string
Default: N/A

Description: Defines an external program that is executed when the syslog-ng OSE configuration is initiated, for example, on startup or during a syslog-ng OSE reload.

teardown()
Type: string
Default: N/A

Description: Defines an external program that is executed when the syslog-ng OSE configuration is stopped or torn down, for example, on shutdown or during a syslog-ng OSE reload.

Example: Using the hook-commands() with a network source

In the following example, the hook-commands() is used with the network() driver and it opens an iptables port automatically as syslog-ng OSE is started/stopped.

The assumption in this example is that the LOGCHAIN chain is part of a larger ruleset that routes traffic to it. Whenever the syslog-ng OSE created rule is there, packets can flow, otherwise the port is closed.

source {
   network(transport(udp)
	hook-commands(
          startup("iptables -I LOGCHAIN 1 -p udp --dport 514 -j ACCEPT")
          shutdown("iptables -D LOGCHAIN 1")
        )
     );
};
host()
Type: hostname or IP address
Default: n/a

Description: Hostname or IP address of the SMTP server.

NOTE:

If you specify host="localhost", syslog-ng OSE will use a socket to connect to the local SMTP server. Use host="127.0.0.1" to force TCP communication between syslog-ng OSE and the local SMTP server.

log-fifo-size()
Type: number
Default: Use global setting.

Description: The number of messages that the output queue can store.

port()
Type: number
Default: 25

Description: The port number of the SMTP server.

reply-to()
Type: string
Default: n/a

Description: Replies of the recipient will be sent to this address (contents of the REPLY-TO field). You can specify the e-mail address, or the name and the e-mail address. Set the reply-to() option multiple times to send the e-mail to multiple recipients. For example: reply-to("admin@example.com") or reply-to("Admin" "admin@example.com") or reply-to("Admin" "admin@example.com") reply-to("Admin2" "admin2@example.com")

You can also use macros to set the value of this parameter.

retries()
Type: number (of attempts)
Default: 3

Description: The number of times syslog-ng OSE attempts to send a message to this destination. If syslog-ng OSE could not send a message, it will try again until the number of attempts reaches retries, then drops the message.

subject()
Type: string
Default: n/a

Description: The SUBJECT field of the e-mail. You can also use macros. For example:

subject("[SYSLOG ALERT]: Critical error message received from $HOST")

If you specify the subject() option multiple times, the last value will be used.

throttle()
Type: number
Default: 0

Description: Sets the maximum number of messages sent to the destination per second. Use this output-rate-limiting functionality only when using disk-buffer as well to avoid the risk of losing messages. Specifying 0 or a lower value sets the output limit to unlimited.

to()
Type: string
Default: localhost

Description: The recipient of the e-mail (contents of the TO field). You can specify the e-mail address, or the name and the e-mail address. Set the to() option multiple times to send the e-mail to multiple recipients. For example: to("admin@example.com") or to("Admin" "admin@example.com") or to("Admin" "admin@example.com") to("Admin2" "admin2@example.com")

You can also use macros to set the value of this parameter.

snmp: Sending SNMP traps

The snmp() driver sends SNMP traps using the Simple Network Management Protocol version 2c or version 3. Incoming log messages can be converted to SNMP traps, as the fields of the SNMP messages can be customized using syslog-ng OSE macros.

The snmp() driver is available in syslog-ng OSE version 3.22 and later.

NOTE:

The snmp destination driver currently supports sending SNMP traps only using the UDP transport protocol.

The snmp() driver requires the host(), trap-obj(), and snmp-obj() options to be set, as well as the engine-id() and version() options when using the SNMPv3 protocol. For the list of available optional parameters, see snmp() destination options.

Declaration:
destination d_snmp {snmp(host() trap-obj() snmp-obj() ...);};

Caution:

If syslog-ng OSE cannot resolve the destination hostname during startup, it will try to resolve the hostname again when the next message to be sent as an SNMP trap is received. However, if this name resolution fails, the trap will be dropped.

NOTE:

The snmp() destination driver does not generate MARK signals itself, but can receive and forward MARK signals.

Example: Using the snmp() destination driver

The following example defines an SNMP destination that uses the SNMPv2c protocol.

destination d_snmpv2c{
    snmp(
        version('v2c')
        host('192.168.1.1')
        trap-obj('.1.3.6.1.6.3.1.1.4.1.0', 'Objectid', '.1.3.6.1.4.1.18372.3.1.1.1.2.1')
        snmp-obj('.1.3.6.1.4.1.18372.3.1.1.1.1.1.0', 'Octetstring', 'Test SNMP trap')
        snmp-obj('.1.3.6.1.4.1.18372.3.1.1.1.1.2.0', 'Octetstring', 'admin')
        snmp-obj('.1.3.6.1.4.1.18372.3.1.1.1.1.3.0', 'Ipaddress', '192.168.1.1')
        );
};

The following example defines an SNMP destination that uses the SNMPv3 protocol and uses macros to fill the values of the SNMP objects.

destination d_snmpv3{
    snmp(
        version('v3')
        host('192.168.1.1')
        port(162)
        engine-id('0xdeadbeefde')
        auth-username('myusername')
        auth-password('password')
        enc-algorithm('AES')
        enc-password('password')
        trap-obj('.1.3.6.1.6.3.1.1.4.1.0', 'Objectid', '.1.3.6.1.4.1.18372.3.1.1.1.2.1')
        snmp-obj('.1.3.6.1.4.1.18372.3.1.1.1.1.1', 'Octetstring', '${MESSAGE}')
        snmp-obj('.1.3.6.1.4.1.18372.3.1.1.1.1.2', 'Octetstring', 'admin')
        snmp-obj('.1.3.6.1.4.1.18372.3.1.1.1.1.3', 'Ipaddress', '${SOURCEIP}')
        );
};

Converting Cisco syslog messages to "clogMessageGenerated" SNMP traps

The syslog-ng OSE application can convert the syslog messages sent by Cisco devices to Cisco-specific SNMP traps defined by the CISCO-SYSLOG-MIB (enterprises.cisco.ciscoMgmt.ciscoCiscoMIB) is also supported (such traps are also referred to as clogMessageGenerated notifications). That way, the incoming log messages can be forwarded to devices used to process and analyze Cisco-specific SNMP traps. For this to work correctly, the following requirements must be met:

  • The syslog-ng Source Configuration Library (SCL) must be included in the syslog-ng OSE configuration file:

    @include "scl.conf"
  • The pattern database described in Parsing Cisco-specific message fields with patterndb must be used to parse the incoming log messages.

To accomplish this, syslog-ng OSE has to use a special pattern database to parse the Cisco-specific syslog messages, because these messages do not comply with the standard syslog formats.

For details on the Cisco-specific SNMP trap format, see CISCO-SYSLOG-MIB on the Cisco website.

Parsing Cisco-specific message fields with patterndb

The ${PROGRAM} part of the syslog messages sent by Cisco devices contain not only the program name, but other important protocol information part as well. The ${PROGRAM} of these messages contains the Facility, Severity, and the Mnemonic (the Cisco name) of the message. The following pattern database parses these values and makes them available as the .cisco.Facility, .cisco.Severity, and .cisco.MsgName, respectively. The actual log message is available as .cisco.MsgText.

<patterndb version="4" pub_date="2011-05-03">
    <ruleset name="cisco snmp ruleset1" xml:id="480de478-d4a6-4a7f-bea4-0c0245d361e3">
        <description>Pattern for Cisco messages having BSD timestamps, for example: Jul 01 2010 00:32:59: %SYS-5-CONFIG_I: Configured from console by console</description>
        <pattern>%@ESTRING:.cisco.Facility:-@@ESTRING:.cisco.Severity:-@@ANYSTRING:.cisco.MsgName@</pattern>
            <rules>
                <rule xml:id="09944c71-95eb-4bc0-8575-936931d85713" provider="oneidentity" class="system">
                    <patterns>
                        <pattern> @ANYSTRING:.cisco.MsgText@</pattern>
                    </patterns>
                </rule>
            </rules>
    </ruleset>
    <ruleset name="cisco snmp ruleset2" xml:id="480de478-d4a6-4a7f-bea4-0c0245d361e3">
        <description>Pattern for Cisco messages having cisco-specific timestamps, for example: 18: Jan 22 10:45:44.543: %SYS-5-CONFIG_I: Configured from console by console</description>
        <rules>
            <rule xml:id="09944c71-95eb-4bc0-8575-936931d85714" provider="oneidentity" class="system">
                <patterns>
                    <pattern>%@ESTRING:.cisco.Facility:-@@ESTRING:.cisco.Severity:-@@ESTRING:.cisco.MsgName::@ @ANYSTRING:.cisco.MsgText@</pattern>
                </patterns>
            </rule>
        </rules>
    </ruleset>
</patterndb>
Sending clogMessageGenerated SNMP traps

To send out clogMessageGenerated SNMP traps, use the cisco_snmp() destination driver. The cisco-snmp() destination is actually a modified version of the snmp() destination driver.

NOTE:

The cisco-snmp() driver is actually a reusable configuration snippet. For details on using or writing SCLs, see Reusing configuration blocks.

The cisco-snmp() driver has the same requirements and options as the snmp() destination driver, but automatically fills the clogMessageGenerated-specific fields with the data received from parsing the Cisco-specific syslog messages using the pattern database. For details on the , see the <INSTALLDIR>/ share/include/scl/snmp/plugin.conf file.

Declaration:

destination d_cisco_snmp {cisco-snmp(host(<hostname>));};
Example: Defining a Cisco-specific SNMP destination

The following example defines an SNMP destination that sends out clogMessageGenerated messages using the SNMPv3 protocol.

destination d_cisco_snmp {cisco-snmp(host("192.168.1.1")
version("v3")
engine-id("'0xdeadbeefde'")
auth-username('myusername')
auth-password('password')
enc-password('password'));};
Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating