syslog-ng Store Box (SSB) T10
Unit: 2
Number of disk slots: 12
Redundant PSU: 1
Mainboard: X9DRW-7TPF+
Chipset: Intel® C602J
NIC:
- 1x Intel® 82599 Dual Port 10G SFP+
- 1x Intel® i350 Dual Port Gigabit Ethernet
- 1x Supermicro AOC-SG-i2 Dual GbE PCI-Ex4
IPMI: Nuvoton WPCM450 BMC, SMT (Latest ver.: 3.39)
CPU: 2x Intel Xeon E5-2630v2 2.6GHz
RAM: 8x 4GB Samsung DDR3-1600 ECC/Unbuffered STD
HDD: 13x Seagate Constellation.2 SAS 1TB 2.5"
RAID:
RAID type: RAID50
Chassis (H x W x D): 89mm x 437mm x 684mm
Chassis (H x W x D): 3,5" x 17,2" x 26,93"
Chassis: SuperChassis 219A-R920WB
Weight: 23,6 kg / 52 lbs
Wattage IDLE: 106 Watt
Wattage LOAD: 987 Watt
System MTBF (h): 36683 hours
Electrical: 100 - 240V, 50-60Hz, 11 - 4.5 Amp
Operating temperature: 10°C to 35°C
Non-operating temperature: -40°C to 70°C
Humidity range: 8% to 90%
Non-operating humidity: 5% to 95%
Compliant to: CE, cCSAus, FCC, VCCI-A
Link to manufacturer documentation
syslog-ng Store Box (SSB) Appliance 3000
Unit: 1 U
Drive Bays: 8 x 2.5
Redundant PSU: Yes
NIC: 4 x 1GBase-T Ethernet ports
IPMI: version 2.0
CPU: Intel Xeon E3-1275 3.60 Ghz 4 Core
Memory: 2x 16GB
HDD: 4x 2TB
RAID: LSI MegaRAID SAS 9361-4i
RAID Type: RAID 5
Usable Storage: 6TB
Chassis (W x H x D): 17.2" x 1.7" x 23.5" (437 x 43 x 650 mm)
Weight: 35 lbs (15.9kg)
Wattage IDLE / LOAD: N/A
Electrical: 500W Redundant AC-DC Power Supplies
Operating Temperature: 5°C to 35°C (41°F to 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Humidity Range: 8% to 90% (non-condensing)
Non-operating Humidity: 5% to 95% (non-condensing)
Compliant to: CE, cCSAus, FCC, VCCI-A
Link to manufacturer documentation
List of appliance ports
-
Redundant power supplies
-
Serial port
-
2x USB ports
-
2x USB ports
-
2x RJ45 GbE Ethernet ports
-
VGA port
-
4 x 1GBase-T Ethernet ports
-
Dedicated IPMI LAN port
syslog-ng Store Box (SSB) Appliance 3500
Unit: 1 U
Drive Bays: 10 x 2.5
Redundant PSU: Yes
NIC:
IPMI: version 2.0
CPU: 2 x Intel Xeon Silver 4110 2.1 Ghz 8 Core
Memory: 8 x 8GB
HDD: 8 x 2TB + 1 HotSpare
RAID:
RAID Type: RAID 50
Usable Storage: 12 TB
Chassis (W x H x D): 17.2" x 1.7" x 28.5" (437 x 43 x 724 mm)
Weight: 41 lbs (18.6kg)
Wattage IDLE / LOAD: N/A
Electrical: 750W Redundant AC-DC Power Supplies
Operating Temperature: 10°C to 35°C (50°F ~ 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Humidity Range: 8% to 90% (non-condensing)
Non-operating Humidity: 5% to 95% (non-condensing)
Compliant to: CE, cCSAus, FCC, VCCI-A
Link to manufacturer documentation
NOTE:The syslog-ng Store Box (SSB) Appliance 3500 is equipped with a dual-port 10Gbit interface. This interface has SFP+ connectors (not RJ-45) labeled 5 and 6, and can be found right of the label 1 and 2 Ethernet interfaces. If you want faster communication, for example, in case of high data load, you can connect up to two 10G SFP+ transceivers. These transceivers are not shipped with the original package and have to be purchased separately.
List of appliance ports
-
Redundant power supplies
-
2x RJ45 10GbE Ethernet ports
-
2x 3.0 USB ports
-
Dedicated IPMI LAN port
-
Serial port
-
VGA port
-
2 x 1GBase-T Ethernet ports
-
2x SFP+ 10GbE ports
syslog-ng Store Box Software Installation Guide
syslog-ng Store Box Software Installation Guide
This section describes how to install the syslog-ng Store Box (SSB) software on a certified hardware.
Note that installing and reinstalling SSB can take a long time, especially for a HA cluster. There are no supported workarounds for reducing the necessary downtime. One Identity recommends testing SSB in a virtual environment, and using physical hardware only for verifying HA functionality and measuring performance.
