The system() driver has the following options:
Description: This option makes it possible to execute external programs when the relevant driver is initialized or torn down. The hook-commands() can be used with all source and destination drivers with the exception of the usertty() and internal() drivers.
NOTE: The syslog-ng OSE application must be able to start and restart the external program, and have the necessary permissions to do so. For example, if your host is running AppArmor or SELinux, you might have to modify your AppArmor or SELinux configuration to enable syslog-ng OSE to execute external applications.
To execute an external program when syslog-ng OSE starts or stops, use the following options:
startup() | |
Type: | string |
Default: | N/A |
Description: Defines the external program that is executed as syslog-ng OSE starts. |
shutdown() | |
Type: | string |
Default: | N/A |
Description: Defines the external program that is executed as syslog-ng OSE stops. |
To execute an external program when the syslog-ng OSE configuration is initiated or torn down, for example, on startup/shutdown or during a syslog-ng OSE reload, use the following options:
setup() | |
Type: | string |
Default: | N/A |
Description: Defines an external program that is executed when the syslog-ng OSE configuration is initiated, for example, on startup or during a syslog-ng OSE reload. |
teardown() | |
Type: | string |
Default: | N/A |
Description: Defines an external program that is executed when the syslog-ng OSE configuration is stopped or torn down, for example, on shutdown or during a syslog-ng OSE reload. |
In the following example, the hook-commands() is used with the network() driver and it opens an iptables port automatically as syslog-ng OSE is started/stopped.
The assumption in this example is that the LOGCHAIN chain is part of a larger ruleset that routes traffic to it. Whenever the syslog-ng OSE created rule is there, packets can flow, otherwise the port is closed.
source { network(transport(udp) hook-commands( startup("iptables -I LOGCHAIN 1 -p udp --dport 514 -j ACCEPT") shutdown("iptables -D LOGCHAIN 1") ) ); };
The systemd-journal() source is used on various Linux distributions, such as RHEL (from RHEL7) and CentOS. The systemd-journal() source driver can read the structured name-value format of the journald system service, making it easier to reach the custom fields in the message. By default, syslog-ng OSE adds the .journald. prefix to the name of every parsed value. For a list and description of name-value pairs that journald provides, see the documentation of journald for your platform (for example, man systemd.journal-fields).
The systemd-journal() source driver is designed to read only local messages through the systemd-journal API. It is not possible to set the location of the journal files, or the directories.
The log-msg-size() option is not applicable for this source. Use the max-field-size() option instead.
This source will not handle the following cases:
Corrupted journal file
Incorrect journal configuration
Any other journald-related bugs
If you are using RHEL-7, the default source in the configuration is systemd-journal() instead of unix-dgram("/dev/log") and file("/proc/kmsg"). If you are using unix-dgram("/dev/log") or unix-stream("/dev/log") in your configuration as a source, syslog-ng OSE will revert to using systemd-journal() instead.
|
Caution:
Only one systemd-journal() source can be configured in the configuration file. If there is more than one systemd-journal() source configured, syslog-ng OSE will not start. |
systemd-journal(options);
To send all fields through the syslog protocol, enter the prefix in the following format: ".SDATA.<name>".
@version: 3.25 source s_journald { systemd-journal(prefix(".SDATA.journald.")); }; destination d_network { syslog("server.host"); }; log { source(s_journald); destination(d_network); };
@version: 3.25 source s_journald { systemd-journal(prefix(".SDATA.journald.")); }; filter f_uid {"${.SDATA.journald._UID}" eq "1000"}; destination d_network { syslog("server.host"); }; log { source(s_journald); filter(f_uid); destination(d_network); };
@version: 3.25 source s_local { systemd-journal(prefix("journald.")); }; destination d_network { network("server.host" template("$(format_json --scope rfc5424 --key journald.*)\n")); }; log { source(s_local); destination(d_network); };
The journal contains credential information about the process that sent the log message. The syslog-ng OSE application makes this information available in the following macros:
Journald field | syslog-ng predefined macro |
---|---|
MESSAGE | $MESSAGE |
_HOSTNAME | $HOST |
_PID | $PID |
_COMM or SYSLOG_IDENTIFIER | $PROGRAM If both _COMM and SYSLOG_IDENTIFIER exists, syslog-ng OSE uses SYSLOG_IDENTIFIER |
SYSLOG_FACILITY | $FACILITY_NUM |
PRIORITY | $LEVEL_NUM |
The systemd-journal() driver has the following options:
Type: | facility string |
Default: | local0 |
Description: The default facility value if the SYSLOG_FACILITY entry does not exist.
Type: | string |
Default: | notice |
Description: The default level value if the PRIORITY entry does not exist.
Type: | string |
Default: | notice |
Description: The default level value if the PRIORITY entry does not exist.
Description: This option makes it possible to execute external programs when the relevant driver is initialized or torn down. The hook-commands() can be used with all source and destination drivers with the exception of the usertty() and internal() drivers.
NOTE: The syslog-ng OSE application must be able to start and restart the external program, and have the necessary permissions to do so. For example, if your host is running AppArmor or SELinux, you might have to modify your AppArmor or SELinux configuration to enable syslog-ng OSE to execute external applications.
To execute an external program when syslog-ng OSE starts or stops, use the following options:
startup() | |
Type: | string |
Default: | N/A |
Description: Defines the external program that is executed as syslog-ng OSE starts. |
shutdown() | |
Type: | string |
Default: | N/A |
Description: Defines the external program that is executed as syslog-ng OSE stops. |
To execute an external program when the syslog-ng OSE configuration is initiated or torn down, for example, on startup/shutdown or during a syslog-ng OSE reload, use the following options:
setup() | |
Type: | string |
Default: | N/A |
Description: Defines an external program that is executed when the syslog-ng OSE configuration is initiated, for example, on startup or during a syslog-ng OSE reload. |
teardown() | |
Type: | string |
Default: | N/A |
Description: Defines an external program that is executed when the syslog-ng OSE configuration is stopped or torn down, for example, on shutdown or during a syslog-ng OSE reload. |
In the following example, the hook-commands() is used with the network() driver and it opens an iptables port automatically as syslog-ng OSE is started/stopped.
The assumption in this example is that the LOGCHAIN chain is part of a larger ruleset that routes traffic to it. Whenever the syslog-ng OSE created rule is there, packets can flow, otherwise the port is closed.
source { network(transport(udp) hook-commands( startup("iptables -I LOGCHAIN 1 -p udp --dport 514 -j ACCEPT") shutdown("iptables -D LOGCHAIN 1") ) ); };
Type: | string |
Default: |
Description: Replaces the ${HOST} part of the message with the parameter string.
Type: | yes or no |
Default: | no |
Description: Enable or disable hostname rewriting.
If enabled (keep-hostname(yes)), syslog-ng OSE will retain the hostname information read from the systemd journal messages.
If disabled (keep-hostname(no)), syslog-ng OSE will use the hostname that has been set up for the operating system instance that syslog-ng is running on. To query or set this value, use the hostnamectl command.
This option can be specified globally, and per-source as well. The local setting of the source overrides the global option if available.
Type: | number (characters) |
Default: | 65536 |
Description: The maximum length of a field's value.
Type: | string |
Default: | .journald. |
Description: If this option is set, every non-built-in mapped names get a prefix (for example: ".SDATA.journald."). By default, syslog-ng OSE adds the .journald. prefix to every value.
Type: | yes|no |
Default: | yes |
Description: If set to yes, syslog-ng OSE will start reading the records from the beginning of the journal, if the journal has not been read yet. If set to no, syslog-ng OSE will read only the new records. If the source has a state in the persist file, this option will have no effect.
Type: | name of the timezone, or the timezone offset |
Default: |
Description: The default timezone for messages read from the source. Applies only if no timezone is specified within the message itself.
The timezone can be specified by using the name, for example, time-zone("Europe/Budapest")), or as the timezone offset in +/-HH:MM format, for example, +01:00). On Linux and UNIX platforms, the valid timezone names are listed under the /usr/share/zoneinfo directory.
Type: | yes or no |
Default: | no |
Description: Add Fully Qualified Domain Name instead of short hostname. This option can be specified globally, and per-source as well. The local setting of the source overrides the global option if available.
This option has no effect if the keep-hostname() option is enabled (keep-hostname(yes)) and the message contains a hostname.
On platforms running systemd, the systemd-syslog() driver reads the log messages of systemd using the /run/systemd/journal/syslog socket. Note the following points about this driver:
If possible, use the more reliable systemd-journal() driver instead.
The socket activation of systemd is buggy, causing some log messages to get lost during system startup.
If syslog-ng OSE is running in a jail or a Linux Container (LXC), it will not read from the /dev/kmsg or /proc/kmsg files.
systemd-syslog();
@version: 3.25 source s_systemdd { systemd-syslog(); }; destination d_network { syslog("server.host"); }; log { source(s_systemdd); destination(d_network); };
© ALL RIGHTS RESERVED. Feedback Nutzungsbedingungen Datenschutz Cookie Preference Center