If you receive the following error message while installing the Safeguard Authentication Services vasypd Unix component, the rpcbind service may not be enabled.
svcadm: Instance "svc:/quest/vas/vasypd:default" has unsatisfied dependencies. Error 4 starting vasypd
To enable the rpcbind service
# svcs -d quest/vas/vasypd STATE STIME FMRI disabled Sep_14 svc:/network/rpc/bind:default online Sep_14 svc:/milestone/single-user:default online Sep_14 svc:/system/filesystem/local:default
# /usr/sbin/svcadm enable -s /network/rpc/bind
# /etc/init.d/vasypd start
Uninstalling the agent packages
Oracle Solaris 10 zones/containers support
Safeguard Authentication Services and Oracle Solaris 10 Zones installation guidelines
This section details how to install, upgrade, and uninstall the Safeguard Authentication Services agent on supported platforms in an enterprise environment using platform package management tools.
To install the Safeguard Authentication Services agent package
See Additional configuration information that follows the table.
| Platform | Command |
|---|---|
|
Linux x86 - RPM |
# rpm -Uhv /<mount>/client/linux-x86/vasclnt-<version>-<build>.i386.rpm |
|
Linux x64 - RPM |
# rpm -Uhv /<mount>/client/linux-x86_64/vasclnt-<version>-<build>.x86_64.rpm |
|
Linux x86 - DEB |
# dpkg -i /<mount>/client/linux-x86/vasclnt-<version>-<build>.i386.deb |
|
Linux x64 - DEB |
# dpkg -i /<mount>/client/linux-x86_64/vasclnt-<version>-<build>_amd64.deb |
|
Linux s390 |
# rpm -Uhv /<mount>/client/linux-s390/vasclnt-<version>-<build>.s390.rpm |
|
Linux s390x |
# rpm -Uhv /<mount>/client/linux-s390x/vasclnt-<version>-<build>.s390x.rpm |
|
SLES 11, 12, and 15 PPC |
# rpm -Uhv /<mount>/client/linux-glibc23-ppc64/vasclnt-glibc23-<version>-<build>.ppc64.rpm |
|
Oracle Solaris 10 and 11 x64 |
# pkgadd -d /<mount>/client/solaris10-x64/vasclnt_SunOS_5.10_i386-<version>-<build>.pkg vasclnt |
| Oracle Solaris 10 and 11 SPARC |
# pkgadd -d /<mount>/client/solaris10-sparc/vasclnt_SunOS_5.8_sparc-<version>-<build>.pkg vasclnt |
|
HP-UX PA-RISC 11i v3 (B.11.31) |
# swinstall -s /<mount>/client/hpux-pa-11v1/vasclnt_hpux-11.11-<version>-<build>.depot vasclnt |
|
HP-UX IA64 11i v3 (B.11.31) |
# swinstall -s /<mount>/client/hpux-ia64/vasclnt_ia64-<version>-<build>.depot vasclnt |
|
AIX 7.1 and 7.2 |
# installp -acXd /<mount>/client/aix-71/vasclnt.AIX_5.3.<version>-<build>.bff all |
|
Mac OS X |
/usr/sbin/installer -pkg '/<mount>/VAS.mpkg/Contents/Packages/vasclnt.pkg' -target / |
|
FreeBSD 10 and 11 |
pkg /<mount>/client/freebsd-x86_64/vasclnt-<build>.txz |
|
Amazon Linux AMI |
# rpm - Uhv /<mount>/client/linux-x86_64/vasclnt-<build>.x86_64.rpm |
In certain situations, pkgadd requests additional information. Respond appropriately for your system configuration. Initialization scripts that are part of the vasclnt package run during installation to help configure the system.
To install the Safeguard Authentication Servicesvasypd Unix component on Oracle Solaris 10, you must have the rpcbind service enabled on the host. See vasypd has unsatisfied dependencies for more information.
You must reboot the HP-UX machine to ensure that all of the new files are installed.HP-UX does not allow you to overwrite files that are in use—this is done as part of the boot sequence.
hdiutil attach <media>/client/macos-106/VAS-<version>.dmg
To upgrade the Safeguard Authentication Services agent package
See Additional configuration information that follows the table.
| Platform | Command |
|---|---|
|
Linux x86 - RPM |
# rpm -Uhv /<mount>/client/linux-x86/vasclnt-<version>-<build>.i386.rpm |
|
Linux x64 - RPM |
# rpm -Uhv /<mount>/client/linux-x86_64/vasclnt-<version>-<build>.x86_64.rpm |
|
Linux x86 - DEB |
# dpkg -i /<mount>/client/linux-x86/vasclnt-<version>-<build>.i386.deb |
|
Linux x64 - DEB |
# dpkg -i /<mount>/client/linux-x86_64/vasclnt-<version>-<build>_amd64.deb |
|
Linux s390 |
# rpm -Uhv /<mount>/client/linux-s390/vasclnt-<version>-<build>.s390.rpm |
|
Linux s390x |
# rpm -Uhv /<mount>/client/linux-s390x/vasclnt-<version>-<build>.s390x.rpm |
|
SLES 11, 12, and 15 PPC |
# rpm -Uhv /<mount>/client/linux-glibc23-ppc64/vasclnt-glibc23-<version>-<build>.ppc64.rpm |
|
Oracle Solaris 10 and 11 x64 |
# pkgadd -d /<mount>/client/solaris10-x64/vasclnt_SunOS_5.10_i386-<version>-<build>.pkg vasclnt |
| Oracle Solaris 10 and 11 SPARC |
# pkgadd -d /<mount>/client/solaris10-sparc/vasclnt_SunOS_5.8_sparc-<version>-<build>.pkg vasclnt |
|
HP-UX PA-RISC 11i v3 (B.11.31) |
# swinstall -s /<mount>/client/hpux-pa-11v1/vasclnt_hpux-11.11-<version>-<build>.depot vasclnt |
|
HP-UX IA64 11i v3 (B.11.31) |
# swinstall -s /<mount>/client/hpux-ia64/vasclnt_ia64-<version>-<build>.depot vasclnt |
|
AIX 7.1 and 7.2 |
# installp -acXd /<mount>/client/aix-71/vasclnt.AIX_5.3.<version>-<build>.bff all |
|
Mac OS X |
/usr/sbin/installer -pkg '/<mount>/VAS.mpkg/Contents/Packages/vasclnt.pkg' -target / |
|
FreeBSD 10 and 11 |
pkg /<mount>/client/freebsd-x86_64/vasclnt-<build>.txz |
|
Amazon Linux AMI |
# rpm - Uhv /<mount>/client/linux-x86_64/vasclnt-<build>.x86_64.rpm |
Note: During the upgrade, vasd reloads and updates its user and group cache. To restart the Safeguard Authentication Services caching service, see Restarting services.
Note: If you are using the licensed version of the Safeguard Authentication Services agent earlier than 3.0, see Licensing Safeguard Authentication Services for licensing instructions.
Note: Oracle Solaris: The -a vasclient-defaults option specifies an alternative default file for pkgadd administrative options that allows pkgadd to overwrite an existing package with a new package.
pkgadd does not support the concept of upgrading a package, so this allows you to upgrade without having to rejoin your machine to the Active Directory domain, or uninstalling the old version first.
Note: HP-UX: Reboot the HP-UX machine to ensure that all of the new files are installed. HP-UX does not allow you to overwrite files that are in use—this is done as part of the boot sequence.
© 2024 One Identity LLC. ALL RIGHTS RESERVED. Nutzungsbedingungen Datenschutz Cookie Preference Center
