Chat now with support
Chat mit Support

Identity Manager 9.2 - Cloud Access Governance Administration Guide

Setting up the synchronization server

To set up synchronization with Azure Infrastructure, a server has to be available that has the following software installed on it:

  • Windows operating system

    Versions supported

    • Windows Server 2022

    • Windows Server 2019

    • Windows Server 2016
    • Windows Server 2012 R2
    • Windows Server 2012
    • Microsoft .NET Framework Version 4.8 or later

      NOTE: Take the target system manufacturer's recommendations into account.

  • Windows Installer
  • One Identity Manager Service, Synchronization Editor, SCIM connector
  • Install One Identity Manager components with the installation wizard.

    1. Select Select installation modules with existing database.
    2. Select the machine role Server | Job server | SCIM.

All One Identity Manager Service actions are executed against the target system environment on the synchronization server. Data entries required for synchronization and administration with the One Identity Manager database are processed by the synchronization server. The synchronization server must be declared as a Job server in One Identity Manager.

Use the One Identity Manager Service to install the Server Installer. The program executes the following steps:

  • Setting up a Job server.
  • Specifying machine roles and server function for the Job server.
  • Remote installation of One Identity Manager Service components corresponding to the machine roles.
  • Configuration of One Identity Manager Service.
  • Starts the One Identity Manager Service.

NOTE: The program executes remote installation of the One Identity Manager Service. Local installation of the service is not possible with this program. Remote installation is only supported within a domain or a trusted domain.

For remote installation of One Identity Manager Service, you require an administrative workstation on which the One Identity Manager components are installed. For detailed information about installing a workstation, see the One Identity Manager Installation Guide.

To install and configure One Identity Manager Service remotely on a server

  1. Start the program Server Installer on your administrative workstation.
  2. Enter the valid connection credentials for the One Identity Manager database on the Database connection page.
  3. Specify the server on which you want to install One Identity Manager Service on the Server properties page.

    Select a Job server from the Server menu.

    - OR -

    To create a new Job server, click Add.

    Enter the following data for the Job server.

    Table 2: Job Server Properties
    Property Description
    Server Job server name.
    Queue

    Name of the queue to handle the process steps.

    Each One Identity Manager Service within the network must have a unique queue identifier. The process steps are requested by the job queue using exactly this queue name. The queue identifier is entered in the One Identity Manager Service configuration file.

    Full server name

    Full server name in accordance with DNS syntax.

    Example: <Name of servers>.<Fully qualified domain name>

    NOTE: You can use the Extended option to make changes to other properties for the Job server. You can also edit the properties later with Designer.

  4. Select SCIM on the Machine roles page.
  5. Select SCIM connector on the Server functions page.
  6. Check the One Identity Manager Service configuration on the Service settings page.

    NOTE:The initial service configuration is predefined already. If further changes need to be made to the configuration, you can do this later with the Designer. For more information about configuring the service, see the One Identity Manager Configuration Guide.

  7. To configure remote installations, click Next.

  8. Confirm the security prompt with Yes.

  9. Select the directory with the install files on Select installation source.

  10. Select the file with the private key on the page Select private key file.

    NOTE: This page is only displayed when the database is encrypted.

  11. Enter the service's installation data on the Service access page.

    Table 3: Installation Data
    Data Description
    Computer

    Server on which to install and start the service from.

    To select a server

    Enter a name for the server.

    - OR -

    Select an entry from the list.

    Service Account

    User account data for the One Identity Manager Service.

    To enter a user account for the One Identity Manager Service

    Set the option Local system account. This starts the One Identity Manager Service under the NT AUTHORITY\SYSTEM account.

    - OR -

    Enter user account, password and password confirmation.

    Installation account

    Data for the administrative user account to install the service.

    To enter an administrative user account for installation

    1. Enable Advanced.

    2. Enable Current user.

      This uses the user account of the current user.

    - OR -

    1. Enter user account, password and password confirmation.

  12. Click Next to start installing the service.

    Installation of the service occurs automatically and may take some time.

  13. Click Finish on the last page of Server Installer.

    NOTE: The service is entered with the name One Identity Manager Service in the server service management.

Creating a synchronization project for initial synchronization of Azure Cloud System

Use the Synchronization Editor to set up synchronization between the One Identity Manager database and Azure Cloud System. The following describes the steps for initial configuration of a synchronization project.

After the initial configuration, you can customize and configure workflows within the synchronization project. Use the workflow wizard in the Synchronization Editor for this. The Synchronization Editor also provides different configuration options for a synchronization project.

The following information is required for setting up a synchronization project.

NOTE: Be aware of case sensitive parts of the URL during configuration.

Table 4: Information Required for Setting up a Synchronization Project
Data Explanation

Servers DNS name / URL

DNS name of the server that provides the SCIM interface or URL for connecting to the server.

Port

Port for accessing the cloud application.

URI service

URL for reaching the SCIM service.

Authentication endpoint or URL

URL available for authenticating. If authentication of another server or another root URL is used for authentication, the full URL must be entered here.

User account and password

User name and password for logging into the cloud application with the authentication types "Basic authentication", "OAuth authentication" and "Negotiated authentication".

Client secret

Security token for logging into the cloud application with the authentication type "OAuth authentication".

Application/Client ID

The application/client ID used to register the cloud application with the security token service. It is required for registering with the authentication type "OAuth-Authentication".

SCIM endpoint

Endpoint URIs or URLs for accessing the cloud application's schema, resource and service provider data.

Synchronization server

All One Identity Manager Service actions are executed against the target system environment on the synchronization server. Data entries required for synchronization and administration with the One Identity Manager database are processed by the synchronization server.

The One Identity Manager Service with the SCIM connector must be installed on the synchronization server.

The synchronization server must be declared as a Job server in One Identity Manager. Use the following properties when you set up the Job server.

Table 5: Additional properties for the Job server

Property

Value

Server function

SCIM connector

Machine role

Server/Job server/SCIM

For more information, see Setting up a synchronization server.

One Identity Manager database connection data

Database server

  • Database
  • SQL Server Login and password

Specifies whether integrated Windows authentication is used. This type of authentication is not recommended. If you decide to use it anyway, ensure that your environment supports Windows authentication.

Remote connection server

To configure synchronization with a target system, One Identity Manager must load the data from the target system. One Identity Manager communicates directly with target system to do this. Sometimes direct access from the workstation on which the Synchronization Editor is installed is not possible, because of the firewall configuration, for example, or because the workstation does not fulfill the necessary hardware and software requirements. If direct access to the workstation is not possible, you can set up a remote connection. The remote connection server and the workstation must be in the same Active Directory domain.

 

Remote connection server configuration

  • One Identity Manager Service is started
  • RemoteConnectPlugin is installed
  • SCIM connector is installed

The remote connection server must be declared as a Job server in One Identity Manager. The Job server name is required.

NOTE: The remote connection server requires the same configuration as the synchronization server (with regard to the installed software and entitlements). Use the synchronization as remote connection server at the same time, by simply installing the RemoteConnectPlugin as well. For more information about setting up a remote connection, see the One Identity Manager Target System Synchronization Reference Guide.

NOTE: The following sequence describes how you configure a synchronization project if Synchronization Editor is both

  • Run in default mode, and
  • Started from the launchpad

If you run the project wizard in expert mode or directly from Synchronization Editor, additional configuration settings can be made. Follow the project wizard instructions through these steps.

To set up initial synchronization project for Azure Cloud System

  1. Start the Launchpad and log on to the One Identity Manager database.

    NOTE: If synchronization is run by an application server, connect the database through the application server.

  2. Select Target system type SCIM interface and click Start.

    This starts the Synchronization Editor's project wizard.

  3. On the System access page, specify how One Identity Manager can access the target system.
    • If access is possible from the workstation on which you started Synchronization Editor, you do not need to make any settings.
    • If access is not possible from the workstation on which you started Synchronization Editor, you can set up a remote connection.

    Enable the Connect using remote connection server option and select the server to be used for the connection under Job server.

  4. On the Configuration data page, enter the connection parameters required by the SCIM connector to login to the cloud application.

    Table 6: Server parameter

    Property

    Description

    Servers DNS name / URL

    DNS name of the server that provides the SCIM interface or URL for connecting to the server.

    URI service

    URL for reaching the SCIM service. Only the part of the URL used in common by all endpoints to be called, is required. The SCIM connector take the URL from the server URL, the port and URI together.

    For example, if the full URL is "https://identities.example.net:8080/scim/v2", then enter "scim/v2" as the URI.

    Table 7: Authentication type

    Property

    Description

    OAuth Authentication

    Authentication using the OAuth protocol 2.0.

  5. On the OAuth authentication page, enter the security token for the authentication type "OAuth authentication" and select the access type.

    Table 8: Features of OAuth Authentication

    Property

    Description

    Client secret

    Security token for logging into the cloud application.

    If the client secret is not known, enter the user name and password.

    Application/Client ID

    The application/client ID used to register the cloud application with the security token service.

    Grant type

    Enable Client credentials 

  6. You can test the connection on Verify connection settings. Click Test.

    One Identity Manager tries to connect to the Starling connect Azure infrastructure Connector.

    TIP: The One Identity Manager saves the test result. When you reopen the page and the connection data has not changed, the result of the test is displayed. You do not have to run the connection test again if it was successful.

  7. On the Endpoint configuration page, enter the URIs for the SCIM end points. The SCIM default is used there is no URI.
    Table 9: End point configuration

    Property

    Description

    Schema

    End point for accessing the schema information for the cloud application.

    Resources

    End point for accessing resource information for the cloud application, for example groups or user accounts.

    Supported service options

    End point for accessing the service provider information for the cloud application.

    To test the connection at the specified end points, click Test.

    TIP:The One Identity Manager saves the test result. If you reopen the page and the end point configuration has not changed, the save test result is displayed.

  8. On the Target product selection page, you can select One Identity Starling Connect.
    • Set the Save connection data on local computer option to save the connection data. This can be reused when you set up other synchronization projects.
    • Click Finish, to end the system connection wizard and return to the project wizard.

  9. On the One Identity Manager Connection tab, test the data for connecting to the One Identity Manager database. The data is loaded from the connected database. Re-enter the password.

    NOTE:If you use an unencrypted One Identity Manager database and have not yet saved any synchronization projects to the database, you need to enter all connection data again. This page is not shown if a synchronization project already exists.

  10. The wizard loads the target system schema. This may take a few minutes depending on the type of target system access and the size of the target system.

  11. Select the project template “Azure Infrastructure Synchronization” on the Select project template page to use for setting up the synchronization configuration.

  12. On the Restrict target system access page, you can specify how system access should work by selecting one of the following options:

    Table 10: Specify target system access
    Option Meaning
    Read-only access to target system

    Specifies whether a synchronization workflow is only to be set up for the initial loading of the target system into the One Identity Manager database.

    The synchronization workflow has the following characteristics

    • Synchronization is in the direction of One Identity Manager.
    • Processing methods in the synchronization steps are only defined for synchronization in the direction of One Identity Manager.

    Read/write access to target system. Provisioning available

    Specifies whether a provisioning workflow is to be set up in addition to the synchronization workflow for the initial loading of the target system.

    The provisioning workflow displays the following characteristics:

    • Synchronization is in the direction of Target system.
    • Processing methods are only defined in the synchronization steps for synchronization in the direction of the Target system.
    • Synchronization steps are only created for such schema classes whose schema types have write access.
  13. Select the synchronization server to run synchronization on the Synchronization server page.

    If the synchronization server is not declared as a Job server in the One Identity Manager database yet, you can add a new Job server.

    1. Click to add a new Job server.
    2. Enter a name for the Job server and the full server name conforming to DNS syntax.

    3. Click OK.

      The synchronization server is declared as Job server for the target system in the One Identity Manager database.

      NOTE: After you save the synchronization project, ensure that this server is set up as a synchronization server.

  14. To close the project wizard, click Finish.

    This creates and allocates a default schedule for regular synchronization. Enable the schedule for regular synchronization.

    The synchronization project is created, saved and enabled immediately.

    NOTE:

    • If you do not want the synchronization project to be activated immediately, disable the Activate and save the new synchronization project automatically option. In this case, save the synchronization project manually before closing the Synchronization Editor.
    • The connection data for the target system is saved in a variable set and can be modified under Configuration | Variables in Synchronization Editor.
    • DO NOT modify the variables in Synchronization Editor

To configure the content of the synchronization log

  1. Open the synchronization project in the Synchronization Editor.
  2. To configure the synchronization log for target system connection, select the category Configuration | Target system.
  3. To configure the synchronization log for the database connection, select Configuration | One Identity Manager connection.
  4. Select the General view and click Setup.
  5. Select the Synchronization log view and set Create synchronization log.
  6. Enable the data to be logged.

    NOTE: Some content generates a particularly large volume of log data. The synchronization log should only contain data required for troubleshooting and other analyses.

  7. Click OK.

To synchronize on a regular basis

  1. Open the synchronization project in the Synchronization Editor.
  2. Select the category Configuration | Start up configurations.
  3. Select a start up configuration in the document view and click Edit schedule.
  4. Edit the schedule properties.
  5. To enable the schedule, click Activate.
  6. Click OK.

To start initial synchronization manually

  1. Open the synchronization project in the Synchronization Editor.

  2. Select the category Configuration | Start up configurations.

  3. Select a start up configuration in the document view and click Execute.

  4. Confirm the security prompt with Yes.

Detailed information about this topic

  • One Identity Manager Target System Synchronization Reference Guide

Related Topics

Display Synchronization Results

Synchronization results are summarized in the synchronization log. You can specify the extent of the synchronization log for each system connection individually. One Identity Manager provides several reports in which the synchronization results are organized under different criteria.

To display a synchronization log

  1. Open the synchronization project in the Synchronization Editor.

  1. Select Logs.

  1. Click  in the navigation view toolbar.

    Logs for all completed synchronization runs are displayed in the navigation view.

  1. Select a log by double-clicking on it.

    An analysis of the synchronization is shown as a report. You can save the report.

    To modify the retention period for synchronization logs

  • In Designer, enable the DPR | Journal | LifeTime configuration parameter and enter the maximum retention period.

Customizing synchronization configuration

You have used the Synchronization Editor to set up a synchronization project for initial synchronization with Azure Cloud System. You can use this synchronization project to load Azure Infrastructure objects into the One Identity Manager cloud database.

You must customize the synchronization configuration in order to compare the database with the Azure Cloud System regularly and to synchronize changes.

IMPORTANT: As long as synchronization is running, you must not start another synchronization for the same target system. This applies especially, if the same synchronization objects would be processed.

  • If another synchronization is started with the same start up configuration, this process is stopped and is assigned the Frozen execution status. An error message is written to the One Identity Manager Service log file.
  • If another synchronization is started with another start up configuration, that addresses same target system, it may lead to synchronization error or loss of data. Specify One Identity Manager behavior in this case, in the start up configuration.
  • Use the schedule to ensure that the start up configurations are executed in sequence.

  • Group start up configurations with the same start up behavior.

For detailed information about configuring synchronization, see the One Identity Manager Target System Synchronization Reference Guide.

Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen