One Identity Safeguard for Privileged Sessions 7.4

The universal SIEM forwarder can automatically send data about the audited sessions to Splunk, ArcSight, or other third-party systems. The messages are standard syslog messages in RFC3164 format (also called legacy-syslog or BSD-syslog format). The body of the syslog message (the MESSAGE part) can be formatted as JavaScript Object Notation (JSON), Common Event Format (CEF), or JSON-CIM format. For information about the details of the messages that the universal SIEM forwarder sends to the external SIEM network elements, see "Message format forwarded to SIEMs" in the Administration Guide.

One of the main advantages of the universal SIEM forwarder is that it has a lower impact on network and performance.

Each message contains the minimal information relevant to the event. Use the built-in correlation feature of the SIEM to combine events by session ID and view all information in one place.

Prerequisites and restrictions

SPS version 5 F9 or later
Splunk version 6.5 or later
The CEF format is supported on all currently supported versions of ArcSight ESM, IBM QRadar and Microsoft Azure Sentinel.
SPS does not send historical data, only data from the sessions started after you complete this procedure.

URL

GET https://<IP-address-of-SPS>/api/configuration/management/universal_siem_forwarder

Cookies

Cookie name	Description	Required	Values
session_id	Contains the authentication token of the user	Required	The value of the session ID cookie received from the REST server in the authentication response, for example, a1f71d030e657634730b9e887cb59a5e56162860. For more information on authentication, see Authenticate to the SPS REST API. NOTE: This session ID refers to the connection between the REST client and the SPS REST API. It is not related to the sessions that SPS records (and which also have a session ID, but in a different format).

Sample request

The following command lists the endpoints for SNMP configuration settings.

curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/management/universal_siem_forwarder

Response

The following is a sample response received when querying the endpoint.

For more information on the meta object, see Message format.

{
    "body": {
        "enabled": true,
        "prefix": "myprefix",
        "targets": [
            {
                "format": "json_cim",
                "name": "siem_target",
                "protocol": {
                    "selection": "syslog",
                    "value": {
                        "address": {
                            "selection": "ip",
                            "value": "192.168.1.1"
                        },
                        "port": 5555,
                        "tls": {
                            "selection": "disabled"
                        }
                    }
                }
            }
        ]
     }

Elements			Type	Description
body			JSON object	Top-level element
	enabled		boolean	Set to true and configure the other options as needed for your environment to forward session data from SPS to an external SIEM device.
	prefix		string	A prefix to make the data more readable. The prefix is added to each JSON key. For example, if you use sps_ as a prefix, in the forwarded JSON message the {"protocol": "ssh"} key changes to {"sps_protocol": "ssh"}, which allows you to identify the forwarded data more easily. Other formats ignore the Prefix option.
	targets		JSON object	Specifies the details of the target SIEM device.
		format	cef \| json \| json_cim	The format of the message sent to the SIEM. Use the following: json_cim: if using Splunk. cef: if using CEF-compatible SIEMs, for example, Microsoft Azure Sentinel. json: for general use.
		name	string	The name of the SIEM forwarder policy.
		protocol	JSON object	Specifies connection details to the target SIEM device. For example: "protocol": { "selection": "syslog", "value": { "address": { "selection": "ip", "value": "192.168.1.1" }, "port": 5555, "tls": { "selection": "secure", "trusted_ca_list_ref": "1241814345d074efd1ded7" } } }

Elements of protocol			Type	Description
selection			string	Must be syslog
value			JSON object	Contains the address of the SIEM and the TLS settings of the connection.
	address		JSON object	Contains the type and the value of the address. For example: "address": { "selection": "ip", "value": "192.168.1.1" }, "address": { "selection": "fqdn", "value": "my-siem.example.com" },
	selection	string	Defines the address type (IP or domain name). Possible values are: fqdn The server address is provided as a fully qualified domain name. ip The server address is provided as an IP address.
	value	string	The address of the server, corresponding to the format set in the selection field.
	port		integer	The port number of the server.
	tls		JSON object	The security settings of the connection. For example: tls": { "selection": "secure", "trusted_ca_list_ref": "1241814345d074efd1ded7" } "tls": { "selection": "disabled" }
	selection	disabled \| insecure \| secure	disabled: Use an unencrypted connection. Since the data forwarded contains sensitive information, One Identity recommends to use TLS encryption between SPS and your SIEM. insecure: Use TLS encryption, but do not validate the certificate of the SIEM. secure: Use TLS encryption and validate the certificate of the SIEM. If you use this option, you must also set the trusted_ca_list_ref field.
	trusted_ca_list_ref	string	The key of the trusted CA list used to validate the certificate of the SIEM. This option is required if you set "selection": "secure". For details on creating trusted CA lists, see Trusted Certificate Authorities.

Configure universal SIEM forwarder

Open a transaction

For more information, see Open a transaction.
If you want to send the messages in an encrypted connection to the SIEM and also validate the certificate of the SIEM, upload the certificate of the CA that signed the certificate of the SIEM to a trusted CA list. For details on creating trusted CA lists, see Trusted Certificate Authorities.

Create the JSON object that configures SPS to forward session data to your SIEM.

POST the JSON object to the https://<IP-address-of-SPS>/api/configuration/management/universal_siem_forwarder endpoint. You can find a detailed description of the available parameters listed in Splunk integration. For example,

{
    "enabled": true,
    "prefix": "myprefix",
    "targets": [
        {
            "format": "json_cim",
            "name": "siem_target",
            "protocol": {
                "selection": "syslog",
                "value": {
                    "address": {
                        "selection": "ip",
                        "value": "192.168.1.1"
                    },
                    "port": 5555,
                    "tls": {
                        "selection": "disabled"
                    }
                }
            }
        }
    ]
 }

Commit your changes

For more information, see Commit a transaction.

Manage SPS clusters

When you have a set of two or more One Identity Safeguard for Privileged Sessions (SPS) instances in your deployment, you can join them into a cluster. This has several advantages. You can:

Manage the nodes from one central location.
Monitor their status and update their configuration centrally.
Search all session data recorded by all nodes in the cluster on a single node.
Scale the performance of the cluster by adding new nodes and joining them to the cluster easily.
Extend auditing to other networks by adding new nodes to the cluster and joining them to the cluster.

This is achieved by assigning roles to the individual nodes in your cluster: you can set one of your SPS nodes to be the Central management node and the rest of the nodes are managed from this central node.

NOTE: All nodes in a cluster must run the same version of SPS.

NOTE: To configure the /api/cluster/ endpoint, your usergroup must have "read and write/perform" privileges assigned to the Basic Settings > Cluster management object. You can configure this on the Users & Access Control > Appliance Access page of SPS's web interface.

For details, see "Managing user rights and usergroups" in the Administration Guide.

URL

GET https://<IP-address-of-any-node-in-cluster>/api/cluster

Cookies

Cookie name	Description	Required	Values
session_id	Contains the authentication token of the user	Required	The value of the session ID cookie received from the REST server in the authentication response, for example, a1f71d030e657634730b9e887cb59a5e56162860. For more information on authentication, see Authenticate to the SPS REST API. NOTE: This session ID refers to the connection between the REST client and the SPS REST API. It is not related to the sessions that SPS records (and which also have a session ID, but in a different format).

Sample request

The following command lists the endpoints available under the cluster endpoint.

curl --cookie cookies https://<IP-address-of-any-node-in-cluster>/api/cluster

Response

The following is a sample response received.

For more information on the meta object, see Message format.

{
    "items": [
        {
            "key": "configuration_sync",
            "meta": {
                "href": "/api/cluster/configuration_sync"
            }
        },
        {
            "key": "join_request",
            "meta": {
                "href": "/api/cluster/join_request"
            }
        },
        {
            "key": "nodes",
            "meta": {
                "href": "/api/cluster/nodes"
            }
        },
        {
            "key": "promote",
            "meta": {
                "href": "/api/cluster/promote"
            }
        },
        {
            "key": "status",
            "meta": {
                "href": "/api/cluster/status"
            }
        }
    ],
    "meta": {
        "href": "/api/cluster",
        "join_request": "/api/cluster/join_request",
        "nodes": "/api/cluster/nodes",
        "parent": "/api",
        "promote": "/api/cluster/promote",
        "status": "/api/cluster/status",
        "configuration_sync": "/api/cluster/configuration_sync"
    }
}

Element			Type	Description
items			Top-level element (list of JSON objects)	List of endpoints (objects) available from the current endpoint.
	key		string	The ID of the endpoint.
	meta		Top-level item (JSON object)	Contains the path to the endpoint.
		href	string (relative path)	The path of the resource that returned the response.

Status and error codes

The following table lists the typical status and error codes for this request. For a complete list of error codes, see Application level error codes.

Code	Description	Notes
201	Created	The new resource was successfully created.
401	Unauthenticated	The requested resource cannot be retrieved because the client is not authenticated and the resource requires authorization to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
403	Unauthorized	The requested resource cannot be retrieved because the client is not authorized to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
404	NotFound	The requested object does not exist.

Promote a SPS node to be the Central Management node in a new cluster

Join node(s) to the cluster

Once you have a Central Management SPS node in place, then you can join other nodes to your cluster.

To join nodes to your cluster, complete the following steps for each node that you want to join to the cluster:

Open a transaction

For more information, see Open a transaction.

Create a join request.

POST the IP address of the Central Management node as a JSON object to the https://<IP-address-of-node-to-join-to-cluster>/api/cluster/join_request endpoint. The body of the POST request should be the following:

{
    "central_management_address": "<IP-address-of-Central-Management-node>"
}

For example:

curl -X POST -H "Content-Type: application/json" --cookie cookies https://<IP-address-of-node-to-join-to-cluster>/api/cluster/join_request --data '{"central_management_address": "<IP-address-of-Central-Management-node>"}'

The following is a sample response received.

For more information on the meta object, see Message format.

By default, no role is assigned to a non-management node, that is why the "roles" array is empty.

{
    "body": {
        "address": "<IP-address-of-node-joined-to-cluster>",
        "node_id": "46f97a58-4028-467d-9a22-9cfe78ae3e1c",
        "psk": "Ler7HZDFmZCxnLLgHNRfZYfORhlZS99l9vEVr5UKtJEb1d4WeaHcBmQJLs4VDWIn",
        "roles": []
    },
    "meta": {
        "href": "/api/cluster/join_request",
        "parent": "/api/cluster",
        "remaining_seconds": 600
    }
}

Elements		Type	Description
body		Top-level element (JSON object)	Contains the JSON object of the node.
	address	string	The IP address of the node.
	node_id	string	A reference ID for the node.
	psk	string	The pre-shared key of the node used for authentication.
	roles	string	The role of the node.

Join the node to the cluster.

POST the "body" object of the response to the https://<IP-address-of-Central-Management-node>/api/cluster/nodes endpoint as a JSON object. The body of the POST request should be the following:

{
    "address": "<IP-address-of-node-joined-to-cluster>",
    "node_id": "46f97a58-4028-467d-9a22-9cfe78ae3e1c",
    "psk": "Ler7HZDFmZCxnLLgHNRfZYfORhlZS99l9vEVr5UKtJEb1d4WeaHcBmQJLs4VDWIn",
    "roles": []
},

For example:

POST -H "Content-Type: application/json" --cookie cookies https://<IP-address-of-Central-Management-node>/api/cluster/nodes --data '{"address": "<IP-address-of-node-joined-to-cluster>", "node_id": "46f97a58-4028-467d-9a22-9cfe78ae3e1c", "psk": "Ler7HZDFmZCxnLLgHNRfZYfORhlZS99l9vEVr5UKtJEb1d4WeaHcBmQJLs4VDWIn","roles": []}'

If the POST request is successful, the response includes:

{
    "body": {
        "address": "<IP-address-of-node-joined-to-cluster>",
        "roles": []
    },
    "key": "46f97a58-4028-467d-9a22-9cfe78ae3e1c",
    "meta": {
        "href": "/api/cluster/nodes/46f97a58-4028-467d-9a22-9cfe78ae3e1c",
        "parent": "/api/cluster/nodes",
        "remaining_seconds": 28800
    }
}

Commit your changes on both the Central Management node and the node you joined to the cluster.

For details, see Commit a transaction.

One Identity Safeguard for Privileged Sessions 7.4 - REST API Reference Guide

Splunk integration

Prerequisites and restrictions

URL

Cookies

Sample request

Response

Configure universal SIEM forwarder

Open a transaction

Create the JSON object that configures SPS to forward session data to your SIEM.

Commit your changes

Manage SPS clusters

URL

Cookies

Sample request

Response

Status and error codes

Promote a SPS node to be the Central Management node in a new cluster

Open a transaction

Create the Central Management node.

Commit your changes

Join node(s) to the cluster

Open a transaction

Create a join request.

Join the node to the cluster.

Commit your changes on both the Central Management node and the node you joined to the cluster.

Bitte w&auml;hlen Sie Ihr Produkt aus:

Damit wir Ihnen besser helfen können, geben Sie den Grund Ihres Chats an:

Empfohlene Lösungen für Ihr Problem

One Identity Safeguard for Privileged Sessions 7.4 - REST API Reference Guide

Splunk integration

Prerequisites and restrictions

URL

Cookies

Sample request

Response

Configure universal SIEM forwarder

Open a transaction

Create the JSON object that configures SPS to forward session data to your SIEM.

Commit your changes

Manage SPS clusters

URL

Cookies

Sample request

Response

Status and error codes

Promote a SPS node to be the Central Management node in a new cluster

Open a transaction

Create the Central Management node.

Commit your changes

Join node(s) to the cluster

Open a transaction

Create a join request.

Join the node to the cluster.

Commit your changes on both the Central Management node and the node you joined to the cluster.

Bitte wählen Sie Ihr Produkt aus: