One Identity Safeguard for Privileged Passwords 6.0.6 LTS

Chatee ahora con Soporte

Table 7: Web kiosk requirements
Component	Requirements
Web management console	Desktop browsers: Apple Safari 13.1 for desktop (or later) Google Chrome 80 (or later) Microsoft Edge 80 (or later) Mozilla Firefox 69 (or later) Microsoft Internet Explorer 11 (Newer features may not work with Internet Explorer. You are encouraged to upgrade to a browser that can support all functionality.)

Platforms and versions follow.

You must license the VM with a Microsoft Windows license. We recommend using either the MAK or KMS method. Specific questions about licensing should be directed to your Sales Representative.
Supported hypervisors:
- Microsoft Hyper-V (VHDX) version 8 or higher
- VMware vSphere with vSphere Hypervisor (ESXi) version 6.5 or higher
- VMware Worksation version 13 or higher
Minimum resources: 4 CPUs, 10GB RAM, and a 500GB disk. The virtual appliances default deploy does not provide adequate resources. Ensure these minimum resources are met.

One Identity Safeguard for Privileged Passwords supports a variety of platforms, including custom platforms.

Safeguard for Privileged Passwords tested platforms

The following table lists the platforms and versions that have been tested for Safeguard for Privileged Passwords (SPP). Additional assets may be added to Safeguard for Privileged Passwords. If you do not see a particular platform listed when adding an asset, use the Other, Other Managed, or Other Linux selection on the Management tab of the Asset dialog. For more information, see Management tab (add asset).

SPP joined to SPS: Sessions platforms

When Safeguard for Privileged Passwords (SPP) is joined with a Safeguard for Privileged Sessions (SPS) appliance, platforms are supported that use one of these protocols:

• SPP 2.8 or lower: RDP, SSH

• SPP 2.9 or higher: RDP, SSH, or Telnet

Some platforms may support more than one protocol. For example, a Linux (or Linux variation) platform supports both SSH and Telnet protocols.

Supported platform updates

For all supported platforms, it is assumed that the latest updates are applied.

Table 8: Supported platforms: Assets that can be managed
Platform	Version	Architecture (all versions unless noted)	SPP	SPS
ACF2 - Mainframe	r14, r15	zSeries	True	True
ACF2 - Mainframe LDAP	r14, r15	zSeries	True	False
Active Directory			True	False
AIX	6.1, 7.1, 7.2	PPC	True	True
Amazon Linux	2	x86_64	True	True
Amazon Web Services (AWS)	1		True	False
CentOS Linux	6 7	(ver 6) x86, x86_64 (ver 7) x86_64	True	True
Cisco ASA	7.x, 8.x		True	True
Cisco IOS	12.X, 15.X		True	True
Debian GNU/Linux	6, 7, 8, 9	x86, x86_64, MIPS, PPC, zSeries	True	True
Dell iDRAC	7, 8		True	True
ESXi (VSphere)	5.5, 6.0, 6.5, 6.7		True	False
F5 Big-IP	12.1.2, 13.0, 14.0		True	True
Fedora	21, 22, 23, 24, 25, 26, 27, 28, 29, 30	x86, x86_64	True	True
Fortinet FortiOS	5.2, 5.6		True	True
FreeBSD	10.4, 11.1, 11.2	x86, x86_64	True	True
HP iLO	2, 3, 4	x86	True	True
HP iLO MP	2, 3	IA-64	True	True
HP-UX	11iv2 (B.11.23), 11iv3 (B.11.31)	PA-RISC, IA-64	True	True
IBM i	7.1, 7.2, 7.3	PPC	True	True
Junos - Juniper Networks	12, 13, 14, 15		True	True
macOS	10.9, 10.10, 10.11, 10.12, 10.13	x86_64	True	True
MongoDB	3.4, 3.6, 4.0		True	False
MySQL	5.6, 5.7		True	False
OpenLDAP	2.4		True	False
Oracle	11g Release 2, 12c Release 1		True	False
Oracle Linux (OEL)	6 7	(ver 6) x86, x86_64 (ver 7) x86_64	True	True
Other			False	False
Other Linux			True	True
Other Managed			True	False
PAN-OS	6.0, 7.0, 8.0, 8.1		True	True
PostgreSQL	9.6, 10.2, 10.3, 10.4, 10.5		True	False
RACF - Mainframe	z/OS V2.1 Security Server, z/OS V2.2 Security Server	zSeries	True	True
RACF - Mainframe LDAP	z/OS V2.1 Security Server, z/OS V2.2 Security Server	zSeries	True	False
Red Hat Enterprise Linux (RHEL)	6, 7, 8	(ver 6) x86, x86_64, PPC, zSeries (ver 7 and 8) x86, x86_64, PPC, zSeries	True	True
SAP HANA	2.0	Other	True	False
SAP Netweaver Application Server	7.3, 7.4, 7.5		True	False
Solaris	10, 11	(ver 10) SPARC, x86, x86_64 (ver 11) SPARC, x86_64	True	True
SonicOS	5.9, 6.2		True	False
SonicWALL SMA or CMS	11.3.0		True	False
SQL Server	2012, 2014, 2016		True	False
SUSE Linux Enterprise Server (SLES)	11 12	(ver 11) x86, x86_64, PPC, zSeries, IA-64 (ver 12) x86_64, PPC, zSeries	True	True
Sybase (Adaptive Server Enterprise)	15.7, 16		True	False
Top Secret - Mainframe	r14, r15	zSeries	True	True
Top Secret - Mainframe LDAP	r14, r15	zSeries	True	False
Ubuntu	14.04 LTS, 15.04, 15.10, 16.04 LTS, 16.10, 17.04, 17.10, 18.04 LTS, 18.10, 19.04	x86, x86_64	True	True
Windows	Vista, 7, 8, 8.1, 10 Enterprise (including LTSC and loT).		True	True
Windows Server	2008, 2008 R2, 2012, 2012 R2, 2016, 2019		True	True
Windows SSH	7, 8, 8.1, 10 Server 2008 R2, 2012, 2012 R2, 2016, 2019 Windows SSH Other		True	True

Table 9: Supported platforms: Directories that can be searched
Platform	Version
Microsoft Active Directory	Windows 2008+ DFL/FFL
OpenLDAP	2.4

For all supported platforms, it is assume that you are applying the latest updates. For unpatched versions of supported platforms, Support will investigate and assist on a case by case basis but it may be necessary for you to upgrade the platform or use SPP's custom platform feature.

Custom platforms

The following example platform scripts are available:

Custom HTTP
Linux SSH
Telnet
TN3270 transports are available

For more information, see the Safeguard for Privileged Passwords Administration Guide, Custom platforms and Creating a custom platform script.

CAUTION: Facebook and Twitter functionality has been deprecated. Refer to the custom platform open source script provided on GitHub. Facebook and Twitter platforms will be remove in a future release.

Sample custom platform scripts and command details are available at the following links available from the Safeguard Custom Platform Home wiki on GitHub:

Command-Reference:

https://github.com/OneIdentity/SafeguardCustomPlatform/wiki/Command-Reference
Writing a custom platform script:

https://github.com/OneIdentity/SafeguardCustomPlatform/wiki/WritingACustomPlatformScript
Example platform scripts are available at this location:

https://github.com/OneIdentity/SafeguardCustomPlatform/tree/master/SampleScripts

CAUTION: Example scripts are provided for information only. Updates, error checking, and testing are required before using them in production. Safeguard for Privileged Passwords checks to ensure the values match the type of the property that include a string, boolean, integer, or password (which is called secret in the API scripts). Safeguard for Privileged Passwords cannot check the validity or system impact of values entered for custom platforms.

One Identity Safeguard for Privileged Passwords is made up of a core set of features, such as the UI and Web Services layers, and a number of modules.

Hardware appliance

The One Identity Safeguard for Privileged Passwords 3000 Appliance and 2000 Appliance ship with the following module which requires a valid license to enable functionality:

Privileged Passwords

You must install a valid license for each Safeguard for Privileged Passwords module to operate. More specifically, if any module is installed, Safeguard for Privileged Passwords will show a license state of Licensed and is operational. However, depending on which models are licensed, you will see limited functionality. That is, even though you will be able to configure access requests:

If a Privileged Passwords module license is not installed, you will not be able to request a password release.

Virtual appliance licensing

You must license the virtual appliance with a Microsoft Windows license. We recommend using either the MAK or KMS method. Specific questions about licensing should be directed to your Sales Representative.

Privileged sessions is available via a join to Safeguard for Privileged Sessions.

The virtual appliance will not function unless the operating system is properly licensed.

License expiration notice

As an Appliance Administrator:

If you receive a "license expiring" notification, apply a new license using that module's Update License link:
- (web client): Click the Settings menu on the left then click Licensing . Click to upload a new license file.
- (desktop client): Navigate to Administrative Tools | Settings | Appliance | Licensing. Click to upload a new license file.
If all licensed modules have expired, you will be prompted to add a new license when logging in to the Safeguard for Privileged Passwords desktop client.
If only one of the licensed modules have expired, apply a new module license by clicking in Administrative Tools | Settings | Appliance | Licensing.

As a Safeguard for Privileged Passwords user, if you get an "appliance is unlicensed" notification, contact your Appliance Administrator.

For more information on adding or updating a Safeguard for Privileged Passwords license, see Licensing.

Releases use the following version designations:

Long Term Support (LTS) Releases: The first digit identifies the release and the second is a zero (for example, 6.0 LTS).
Maintenance LTS Releases: A third digit is added followed by LTS (for example, 6.0.6 LTS).
Feature Releases: The Feature Releases are two digits (for example, 6.6).

Customers choose between two lanes for receiving releases: Long Term Support (LTS) Release or Feature Release. See the following table for details.

Table 10: Comparison of Long Term Support (LTS) Release and Feature Release
	Long Term Support (LTS) Release	Feature Release
Release frequency	Frequency: Typically, every 2 years Scope: Includes new features, resolved issues and security updates Versioning: The first digit identifies the LTS and the second digit is a 0 (for example, 6.0 LTS, 7.0 LTS, and so on).	Frequency: Typically, every 3 months Scope: Includes the latest features, resolved issues, and other updates, such as security patches for the OS Versioning: The first digit identifies the LTS and the second digit is a number identifying the Feature Release (for example, 6.6, 6.7, and so on).
Maintenance Release	Frequency:Typically, every 3 months during full support Scope: Includes critical resolved issues Versioning: A third digit designates the maintenance LTS Release (for example, 6.0.6 LTS).	Frequency:Only for highly critical issues Scope: Includes highly critical resolved issues Versioning: A third digit designates the maintenance Feature Release (for example, 6.6.1).
Support	Typically 3 years after the original publication date or until the next LTS is published (whichever date is later)	Typically 6 months after the original publication date or until the next feature or LTS Release is published (whichever date is later)

Release details can be found at Product Life Cycle.

CAUTION: Downgrading from the latest Feature Release, even to an LTS release, voids support for SPP.

One Identity strongly recommends always installing the latest revision of the release path you use (Long Term Support path or Feature Release path).

Moving between LTS and Feature Release versions

You can move from an LTS version (for example, 6.0.7 LTS) to the same feature version (6.7) and then patch to a later feature version. After that, you can patch from the minimum version for the patch, typically N-3. If you move from an LTS version to a feature version, you will receive a warning like the following which informs you that you will only be able to apply a Feature Release until the next LTS Release:

Warning: You are patching to a Feature Release from an LTS Release. If you apply this update, you will not be able to upgrade to a non-Feature Release until the next LTS major release version is available. See the Administration Guide for details.

You cannot move from a Feature Release to LTS Release. For example, you cannot move from 6.7 to 6.0.7 LTS. You have to keep upgrading with each new Feature Release until the next LTS Release version is published. For this example, you would wait until 7.0 LTS is available.

Patching

You can only patch from a major version. For example, if you have version 6.6 and want to patch to 7.7, you must patch to 7.0 LTS and then apply 7.7.

An LTS major version of Safeguard for Privileged Passwords (SPP) will work with the same LTS major version of Safeguard for Privileged Sessions (SPS). For the best experience, it is recommended you keep both their SPP and SPS in sync on the latest and supported version.

Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación