Description
Type string READONLY
exittime is the time the requested command finished running (HH:MM:SS)
Example
#display all commands that finished after 6pm pmlog -c 'exittime > "18:00:00"'
Type string READONLY
exittime is the time the requested command finished running (HH:MM:SS)
#display all commands that finished after 6pm pmlog -c 'exittime > "18:00:00"'
This section describes the settings and parameters used by Privilege Manager for Unix. These settings are stored on each host in the /etc/opt/quest/qpm4u/pm.settings file which contains a list of settings, one per line, in the form: settingName value1 [value2 [... valuen]].
You can modify these policy server configuration settings using the configuration script initialized by the pmsrvconfig command or you can modify the pm.settings file manually. See Configuring the primary policy server for Privilege Manager for Unix for details about running the configuration script.
If you manually change the pm.settings file, restart the pmserviced and/or pmloadcheck daemons in order for the changes to take effect.
The following table describes each of the pm.settings variables:
Defaults may differ depending on the platform you are configuring and whether you are configuring a policy server or PM Agent. Many of these settings will not have a default value.
The variables are not case sensitive.
Variable | Data type | Description |
---|---|---|
auditsrvCAbundle |
string |
The path to a certificate authority bundle file, in PEM format, to use instead of the system's default certificate authority database when doing TLS authentication. Example: /etc/ssl/sudo/ca.bundle.pem |
auditsrvCert |
string |
The path to the policy server's certificate file, in PEM format. Used for TLS only. Example: /etc/ssl/sudo/qpm_qpmdevel1.cert.pem |
auditsrvEnabled |
boolean (YES/NO) |
Specifies if audit server logging is on or off. The default is NO. For more information, see Audit server logging on |
auditsrvEnforced |
boolean (YES/NO) |
If YES, the audit server connection failures will be fatal. If NO, the audit log will be collected encrypted on the file system.and sent again to the server if it comes back. |
auditsrvHosts |
list of host ports of the audit sever |
The host:port of the audit server. Host can be an ipv4/ipv6/hostname. Multiple hosts need to be separated by comma. Example: qpmdevel1.qpmdomain:30344,127.0.0.1:30344 |
auditsrvKeepalive |
boolean (YES/NO) |
Select whether keepalive is enabled on the connection. |
auditsrvLocaliologs |
boolean (YES/NO) |
If YES, old pmlog io logs are also written. if NO, io logs are only stored by the sudo log server. |
auditsrvLogdir |
string |
If auditsrvEnforced is NO, this is the log directory where audit logs get saved temporarily until they can be sent successfully. Example: /var/opt/quest/qpm4u/auditserver |
auditsrvPkey |
string |
The path to the private key of the policy server, in PEM format. Used for TLS only. Example: /etc/ssl/sudo/qpm_qpmdevel1.key.pem |
auditsrvPSpaceMB |
boolean (YES/NO) |
The minimum amount of disk space needed before starting to write an audit trail to the temporary storage. This is to prevent disk space filled up. If the disk space is lower, the policy server will reject the connections, just like if it was in "enforced" mode. |
auditsrvTimeout |
integer |
The connection timeout in seconds. 3 seconds is recommended. |
auditsrvTLS |
boolean (YES/NO) |
If YES, the communication with all the servers will use TLS. Specifying a key is required in this case. |
auditsrvTLSCheckpeer |
boolean (YES/NO) |
If YES, client certificates will be validated by the server; clients without a valid certificate will be unable to connect. If NO, no validation of client certificates will be performed. If true and client certificates are created using a private certificate authority, the tls_cacert setting must be set to a CA bundle that contains the CA certificate used to generate the client certificate. The default value is NO. |
auditsrvTLSVerify |
boolean (YES/NO); |
If YES, the server certificate will be verified at startup and clients will authenticate the server by verifying its certificate and identity. If NO, no verification is performed of the server certificate by the server or the client. When using self-signed certificates without a certificate uthority, this setting should be set to NO. The default value is YES. |
certificates | boolean (YES/NO) |
Specifies whether certificates are enabled. To enable configurable certification, add the following statement to the /etc/opt/quest/qpm4u/pm.settings file on each host: certificates yes. Default: NO For more information, see Enable configurable certification.. |
checksumtype | string | Specifies standard or MD5 checksum types for use with pmsum program. |
clients | list of hostnames |
Identifies hosts for which remote access functions are allowed. Only required if one policy server needs to retrieve remote information from another policy server that does not normally accept requests from it. For more information, see Central logging with Privilege Manager for Unix.. |
clientverify | string |
Identifies the level of host name verification applied by the policy server host to the submit host name. The verification ensures that the incoming IP address resolves (on the primary policy server) to the same host name as presented by the submit host. Valid values are:
Default: NONE |
encryption | string |
Identifies the encryption type. You must use the same encryption setting on all hosts in your system. Valid values are:
Default: AES |
eventlogqueue | string |
Directory used by pmmasterd and pmlogsrvd where event data is temporarily queued prior to being written to the event log database. Default: /var/opt/quest/qpm4u/evcache |
EventQueueFlush | integer |
Tells pmlogsrvd how often to reopen the db (in minutes) flushing the data. Default: 0, in which case pmlogsrvd will keep the db open while the service is running. |
EventQueueProcessLimit | integer |
Specifies the number of cached events that will be processed at a time; this limits the memory use in pmlogsrvd. Default: 0, in which case pmlogsrvd will not apply a limit. |
facility | string | Sets the SYSLOG facility name to use when logging a message to the syslog file.
Valid values are:
Default: LOG_AUTH, if the platform defines LOG_AUTH; otherwise the default is 0 (zero). |
failovertimeout | integer |
Sets the timeout in seconds before a connection attempt to a policy server is abandoned and the client fails over to the next policy server in the list. This setting also affects the timeout for the client and agent. Default: 10 seconds. If omitted from pm.settings, default is 180 seconds. |
failsafecommand | string |
Sets the command to run in failsafe mode; that is, login pmksh user as root. |
fwexternalhosts | list | Identifies a list of hosts to use a different range of source ports, identified by the openreservedport and opennonreserved port settings. |
getpasswordfromrun | boolean (YES/NO) |
Determines whether authentication is performed on the policy server or the client when a getuserpasswd() or getgrouppasswd() function is called from the policy file. If set to yes, the authentication is performed on the client. This variable also affects the user information functions: getfullname(), getgroup(), getgroups(), gethome(), and getshell(). If set to yes in the policy server's pm.settings file, these functions retrieve user information from the client host. Default: NO |
handshake | boolean (YES/NO) |
Enables the encryption negotiation handshake. This allows a policy server to support clients running different levels of encryption. Default: NO |
kerberos | boolean (YES/NO) |
Enables or disables Kerberos. Default: NO |
keytab | string |
Sets the path to the Kerberos keytab file. Default: /etc/opt/quest/vas/host.keytab |
krb5rcache | string |
Sets the path to the Kerberos cache. Default: /var/tmp |
krbconf | string |
Sets the path to the Kerberos configuration file. Default: /etc/opt/quest/vas/vas.conf |
libldap | string |
Specifies the pathname to use for the LDAP library. No default value. |
localport | integer |
Sets the TCP/IP port to use for pmlocald. Default: 12346 |
lprincipal | string |
Sets the service principal name to use for the agent. Default: pmlocald |
masterport | integer |
Specifies the TCP/IP port to use for pmmasterd. Default: 12345 |
masters | list |
Identifies a list of policy server hosts to which a client can submit requests for authorization, and from which an agent can accept authorized requests. This can contain host names or netgroups. No default value. |
mprincipal | string |
Sets the Kerberos service principal name to use for the policy server. Default: host |
nicevalue | integer |
Sets the execution priority level for Privilege Manager for Unix processes. Default: 0 |
opennonreserveportrange | integer integer |
Specifies a range of non-reserved ports to use as source ports when connecting to a host in the fwexternalhosts list. No default value. |
openreserveportrange | integer integer |
Specifies a range of reserved ports to use as source ports when connecting to a host in the fwexternalhosts list. No default value. |
pmclientdenabled | boolean (YES/NO) |
Flag that enables the pmclientd daemon. |
pmclientdopts | string |
Sets the options for the pmclientd daemon. |
pmlocaldenabled | boolean (YES/NO) |
Flag that enables the pmlocald daemon. |
pmlocaldlog | string |
Sets the path for the agent error log. Default: /var/adm/pmlocald.log or /var/log/pmlocald.log depending on the platform. |
pmlocaldopts | string |
Sets the options for the pmlocald daemon. |
pmloggroup | string |
Specifies the group ownership for iolog and eventlogs. Default: pmlog |
pmlogsrvlog | string | Identifies the log used by the pmlogsrvd daemon. |
pmmasterdenabled | boolean (YES/NO) |
Flag that enables the pmmasterd daemon. Default: YES |
pmmasterdlog | string |
Sets the path for the master error log. Default: /var/adm/pmmasterd.log or /var/log/pmmasterd.log depending on the platform. |
pmmasterdopts | string |
Sets the options for the pmmasterd daemon. Default: -ar |
pmrunlog | string |
Sets the path for the client error log. Default: /var/adm/pmrun.log or /var/log/pmrun.log depending on platform. |
pmservicedlog | string |
Identifies the log used by the pmserviced daemon. Default: /var/log/pmserviced.log |
pmtunneldenabled | boolean (YES/NO) |
Flag that enables the pmtunneld daemon. |
pmtunneldopts | string |
Sets the options for the pmtunneld daemon. |
policydir | string |
Sets the directory in which to search for policy files Default: /etc/opt/quest/qpm4u/policy |
policyfile | string |
Sets the main policy filename. Default: pm.conf |
policymode | string |
Specifies the type of security policy to use, pmpolicy or Sudo. Default: sudo |
reconnectagent | boolean (YES/NO) |
Allows backwards compatibility with older agents on a policy server. Settings on policy server and agents must match. Default: NO |
reconnectclient | boolean (YES/NO) |
Allows backwards compatibility with older clients on a policy server. Settings on policy server and client must match. Default: NO |
selecthostrandom | boolean (YES/NO) |
Set to yes to attempt connections to the list of policy servers in random order. Set to no to attempt connections to the list of policy servers in the order listed in pm.settings. Default: YES |
setnonreserveportrange | integer integer |
Specifies a range of non-reserved ports to use as source ports by the client and agent.
The full range for non-reserved ports is 1024 to 65535. For more information, see Restricting port numbers for command responses.. |
setreserveportrange | integer integer |
Specifies a range of reserved ports to use as source ports by the client when making a connection to the policy server.
The full range for reserved ports is 600 to 1023. For more information, see Restricting port numbers for command responses.. |
setutmp | boolean (YES/NO) |
Default: YES |
shortnames | boolean (YES/NO) |
Enables or disables short names usage. Setting shortnames to yes allows the use of short (non-fully qualified) host names. If set to no, then the Privilege Manager for Unix components will attempt to resolve all host names to a fully qualified host name. Default: YES |
syslog | boolean (YES/NO) |
Set to yes to send error messages to the syslog file as well as to the Privilege Manager for Unix error log. Default: YES |
thishost | string |
Sets the client's host name to use for verification. Specifying a thishost setting causes the Privilege Manager components to bind network requests to the specified host name or IP address. If you set thishost to the underscore character ( _ ), requests bind to the host's primary host name. No default value. |
tunnelport | integer |
Sets the TCP/IP port to use for the pmtunneld daemon. Default: 12347 |
tunnelrunhosts | list | Identifies the hosts on the other side of a firewall.
No default value. For full details of how to configure your system across a firewall, see Configuring firewalls. |
validmasters |
list |
Identifies a list of policy servers that can be identified using the pmrun -m <master> option, but that will not be used when you run a normal pmrun command. This is useful for testing connections to a policy server before bringing it on line. No default value. |
You can use the following reserved words to control the flow of logic in the pmpolicy file.
Statement | Description |
---|---|
accept, reject | Accept or reject the submitted request. |
break | Break out of a while or for loop. |
continue | Skip the rest of the loop body and continue to the next iteration of the loop. |
do-while | Perform the loop body multiple times until an expression is true, evaluating the expression after running the statement. |
for loop | c-style for loop. |
for loop | Perform the loop body for each element in a list. |
function | Stand-alone subroutine, allowing you to reuse policy. |
if-else | Used to determine which statement to run next based on whether an expression is true or false. |
include | Include the named policy file. |
procedure / function | Stand-alone subroutine, allowing you to reuse policy. |
readonly | Mark a variable as read-only. |
readonlyexcept | Mark all variables as read-only except for the specified list. |
return | Return from a function or procedure. |
switch | Used to determine which statement to run next based on whether an expression matches one of several values. |
Perform the loop body multiple times until an expression is true, evaluating the expression before running the statement. |
accept [from ["user"][, ["submithost"][, ["command"]
[, ["runhost"]]]]] [when conditional-expression]
[with optional-statements-before-execution];
reject ["reject-text"] [from ["user"][, ["submithost"]
[, ["command"][, ["runhost"]]]]]
[when conditional-expression];
The accept statement accepts the job request submitted by a user. The reject statement denies the request. After a command is accepted, nothing else in the configuration script is run. If neither an accept nor reject statement is reached while parsing the configuration file, the command is rejected by default. A default reject message is displayed to the user if no message is specified with the reject statement. If a null string is specified, then the command is rejected silently.
The expanded form of the accept and reject statements make it possible to accept or reject a command based on the criteria "who", "what", and "where" without using conditional statements.
adminusers = {"dan","robyn"}; adminprogs = {"hostname","kill","csh","ksh"}; if (user in adminusers && command in adminprogs) { runuser = "root"; if (user == "dan" && !officehours) { reject "You can't use “ + runcommand + “ outside office hours\n"; #custom msg } if (user == "robyn" && !officehours) { if (!getuserpasswd(user)) reject ; #use default reject msg } accept; } else { reject ""; #reject silently - no msg displayed to the user }
© ALL RIGHTS RESERVED. Feedback Términos de uso Privacidad Cookie Preference Center