Chatee ahora con Soporte
Chat con el soporte

Identity Manager 9.2.1 - Administration Guide for Connecting to Azure Active Directory

Managing Azure Active Directory environments Synchronizing an Azure Active Directory environment
Setting up initial synchronization with an Azure Active Directory tenant Adjusting the synchronization configuration for Azure Active Directory environments Running synchronization Tasks following synchronization Troubleshooting Ignoring data error in synchronization Pausing handling of target system specific processes (Offline mode)
Managing Azure Active Directory user accounts and identities Managing memberships in Azure Active Directory groups Managing Azure Active Directory administrator roles assignments Managing Azure Active Directory subscription and Azure Active Directory service plan assignments
Displaying enabled and disabled Azure Active Directory service plans forAzure Active Directory user accounts and Azure Active Directory groups Assigning Azure Active Directory subscriptions to Azure Active Directory user accounts Assigning disabled Azure Active Directory service plans to Azure Active Directory user accounts Inheriting Azure Active Directory subscriptions based on categories Inheritance of disabled Azure Active Directory service plans based on categories
Login credentials for Azure Active Directory user accounts Azure Active Directory role management
Azure Active Directory role management tenants Enabling new Azure Active Directory role management features Azure Active Directory role main data Displaying Azure Active Directory scoped role assignments Displaying scoped role eligibilities for Azure Active Directory roles Overview of Azure Active Directory scoped role assignments Main data of Azure Active Directory scoped role assignments Managing Azure Active Directory scoped role assignments Adding Azure Active Directory scoped role assignments Editing Azure Active Directory scoped role assignments Deleting Azure Active Directory scoped role assignments Assigning Azure Active Directory scoped role assignments Assigning Azure Active Directory system roles to scopes through role assignments Assigning Azure Active Directory business roles to scopes though role assignments Assigning Azure Active Directory organizations to scopes through role assignments Overview of Azure Active Directory scoped role eligibilities Main data of Azure Active Directory scoped role assignments Managing Azure Active Directory scoped role eligibilities Adding Azure Active Directory scoped role eligibilities Editing Azure Active Directory scoped role eligibilities Deleting Azure Active Directory scoped role eligibilities Assigning Azure Active Directory scoped role eligibilities Assigning Azure Active Directory system roles to scopes through role eligibilities Assigning Azure Active Directory business roles to scopes though role eligibilities Assigning Azure Active Directory organizations to scopes through role eligibilities
Mapping Azure Active Directory objects in One Identity Manager
Azure Active Directory core directories Azure Active Directory user accounts Azure Active Directory user identities Azure Active Directory groups Azure Active Directory administrator roles Azure Active Directory administrative units Azure Active Directory subscriptions and Azure Active Directory service principals Disabled Azure Active Directory service plans Azure Active Directory app registrations and Azure Active Directory service principals Reports about Azure Active Directory objects
Handling of Azure Active Directory objects in the Web Portal Recommendations for federations Basic configuration data for managing an Azure Active Directory environment Troubleshooting Configuration parameters for managing an Azure Active Directory environment Default project template for Azure Active Directory Editing Azure Active Directory system objects Azure Active Directory connector settings

Target system managers for Azure Active Directory

A default application role exists for the target system manager in One Identity Manager. Assign identities to this application role who have permission to edit all tenants in One Identity Manager.

Define additional application roles if you want to limit the permissions for target system managers to individual tenants. The application roles must be added under the default application role.

For more information about implementing and editing application roles, see the One Identity Manager Authorization and Authentication Guide.

Implementing application roles for target system managers
  1. The One Identity Manager administrator allocates identities to be target system administrators.

  2. These target system administrators add identities to the default application role for target system managers.

    Target system managers with the default application role are authorized to edit all the tenants in One Identity Manager.

  3. Target system managers can authorize other identities within their area of responsibility as target system managers and if necessary, create additional child application roles and assign these to individual tenants.

Table 48: Default application roles for target system managers
User Tasks

Target system managers

 

Target system managers must be assigned to the Target systems | Azure Active Directory application role or a child application role.

Users with this application role:

  • Assume administrative tasks for the target system.

  • Create, change, or delete target system objects.

  • Edit password policies for the target system.

  • Prepare groups to add to the IT Shop.

  • Can add identities that do not have the Primary identity identity type.

  • Configure synchronization in the Synchronization Editor and define the mapping for comparing target systems and One Identity Manager.

  • Edit the synchronization's target system types and outstanding objects.

  • Authorize other identities within their area of responsibility as target system managers and create child application roles if required.

To initially specify identities to be target system administrators

  1. Log in to the Manager as a One Identity Manager administrator (Base role | Administrators application role)

  2. Select the One Identity Manager Administration > Target systems > Administrators category.

  3. Select the Assign identities task.

  4. Assign the identity and save the changes.

To add the first identities to the default application as target system managers

  1. Log in to the Manager as a target system administrator (Target systems | Administrators application role).

  2. Select the One Identity Manager Administration > Target systems > Azure Active Directory category.

  3. Select the Assign identities task.

  4. Assign the identities you want and save the changes.

To authorize other identities as target system managers when you are a target system manager

  1. Log in to the Manager as a target system manager.

  2. Select the application role in the Azure Active Directory > Basic configuration data > Target system managers category.

  3. Select the Assign identities task.

  4. Assign the identities you want and save the changes.

To specify target system managers for individual tenants

  1. Log in to the Manager as a target system manager.

  2. Select the Azure Active Directory > Tenants category.

  3. Select the tenant in the result list.

  4. Select the Change main data task.

  5. On the General tab, select the application role in the Target system manager menu.

    - OR -

    Next to the Target system manager menu, click to create a new application role.

    1. Enter the application role name and assign the Target systems | Azure Active Directory parent application role.

    2. Click OK to add the new application role.

  6. Save the changes.
  7. Assign identities to this application role who are permitted to edit the tenant in One Identity Manager.

Related topics

Job server for Azure Active Directory-specific process handling

Servers must be informed of their server functionality in order to handle Azure Active Directory-specific processes in One Identity Manager. For example, the synchronization server.

You have several options for defining a server's functionality:

  • In the Designer, create an entry for the Job server in the Base Data > Installation > Job server category. For more information about this, see the One Identity Manager Configuration Guide.

  • In the Manager, select an entry for the Job server in the Azure Active Directory > Basic configuration data > Server category and edit the Job server main data.

    Use this task if the Job server has already been declared in One Identity Manager and you want to configure special functions for the Job server.

NOTE: One Identity Manager must be installed, configured, and started in order for a server to perform its function in the One Identity Manager Service network. Proceed as described in the One Identity Manager Installation Guide.

To edit a Job server and its functions

  1. In the Manager, select the Azure Active Directory > Basic configuration data > Server category.

  2. Select the Job server entry in the result list.

  3. Select the Change main data task.

  4. Edit the Job server's main data.

  5. Select the Assign server functions task and specify server functionality.

  6. Save the changes.
Detailed information about this topic

General main data of Job servers

NOTE: All editing options are also available in the Designer under Base Data > Installation > Job server.

NOTE: More properties may be available depending on which modules are installed.

Table 49: Job server properties

Property

Meaning

Server

Job server name.

Full server name

Full server name in accordance with DNS syntax.

Syntax:

<Name of servers>.<Fully qualified domain name>

Target system

Computer account target system.

Language

Language of the server.

Server is cluster

Specifies whether the server maps a cluster.

Server belongs to cluster

Cluster to which the server belongs.

NOTE: The Server is cluster and Server belongs to cluster properties are mutually exclusive.

IP address (IPv6)

Internet protocol version 6 (IPv6) server address.

IP address (IPv4)

Internet protocol version 4 (IPv4) server address.

Copy process (source server)

Permitted copying methods that can be used when this server is the source of a copy action. At present, only copy methods that support the Robocopy and rsync programs are supported.

If no method is given, the One Identity Manager Service determines the operating system of the server during runtime. Replication is then performed with the Robocopy program between servers with a Windows operating system or with the rsync program between servers with a Linux operating system. If the operating systems of the source and destination servers differ, it is important that the right copy method is applied for successful replication. A copy method is chosen that supports both servers.

Copy process (target server)

Permitted copying methods that can be used when this server is the destination of a copy action.

Coding

Character set coding that is used to write files to the server.

Parent Job server

Name of the parent Job server.

Executing server

Name of the executing server. The name of the server that exists physically and where the processes are handled.

This input is evaluated when the One Identity Manager Service is automatically updated. If the server is handling several queues, the process steps are not supplied until all the queues that are being processed on the same server have completed their automatic update.

Queue

Name of the queue to handle the process steps. The process steps are requested by the Job queue using this queue identifier. The queue identifier is entered in the One Identity Manager Service configuration file.

Server operating system

Operating system of the server. This input is required to resolve the path name for replicating software profiles. The values Win32, Windows, Linux, and Unix are permitted. If no value is specified, Win32 is used.

Service account data

One Identity Manager Service user account information. In order to replicate between non-trusted systems (non-trusted domains, Linux server), the One Identity Manager Service user information has to be declared for the servers in the database. This means that the service account, the service account domain, and the service account password have to be entered for the server.

One Identity Manager Service installed

Specifies whether a One Identity Manager Service is installed on this server. This option is enabled by the QBM_PJobQueueLoad procedure the moment the queue is called for the first time.

The option is not automatically removed. If necessary, you can reset this option manually for servers whose queue is no longer enabled.

Stop One Identity Manager Service

Specifies whether the One Identity Manager Service has stopped. If this option is set for the Job server, the One Identity Manager Service does not process any more tasks.

You can make the service start and stop with the appropriate administrative permissions in the Job Queue Info program. For more information, see the One Identity Manager Process Monitoring and Troubleshooting Guide.

Paused due to unavailability of a target system

Specifies whether task processing for this queue has been stopped because the target system that uses this Job server as a synchronization server is temporarily unavailable. As soon as the target system is available again, processing starts and all outstanding tasks are performed.

For more information about offline mode, see the One Identity Manager Target System Synchronization Reference Guide.

No automatic software update

Specifies whether to exclude the server from automatic software updating.

NOTE: Servers must be manually updated if this option is set.

Software update running

Specifies whether a software update is currently running.

Server function

Server functionality in One Identity Manager. One Identity Manager processes are handled with respect to the server function.

Related topics

Specifying server functions

NOTE: All editing options are also available in the Designer under Base Data > Installation > Job server.

The server function defines the functionality of a server in One Identity Manager. One Identity Manager processes are handled with respect to the server function.

NOTE: More server functions may be available depending on which modules are installed.
Table 50: Permitted server functions

Server function

Remark

Azure Active Directory connector (via Microsoft Graph)

Server on which the Azure Active Directory connector is installed. This server synchronizes the Azure Active Directory target system.

CSV connector

Server on which the CSV connector for synchronization is installed.

Domain controller

The Active Directory domain controller. Servers that are not labeled as domain controllers are considered to be member servers.

Printer server

Server that acts as a print server.

Generic server

Server for generic synchronization with a custom target system.

Home server

Server for adding home directories for user accounts.

Update server

This server automatically updates the software on all the other servers. The server requires a direct connection to the database server that One Identity Manager database is installed on. It can run SQL tasks.

The server with the One Identity Manager database installed on it is labeled with this functionality during initial installation of the schema.

SQL processing server

It can run SQL tasks. The server requires a direct connection to the database server that One Identity Manager database is installed on.

Several SQL processing servers can be set up to spread the load of SQL processes. The system distributes the generated SQL processes throughout all the Job servers with this server function.

CSV script server

This server can process CSV files using the ScriptComponent process component.

Generic database connector

This server can connect to an ADO.Net database.

One Identity Manager database connector

Server on which the One Identity Manager connector is installed. This server synchronizes the One Identity Manager target system.

One Identity Manager Service installed

Server on which a One Identity Manager Service is installed.

Primary domain controller

Primary domain controller.

Profile server

Server for setting up profile directories for user accounts.

SAM synchronization Server

Server for synchronizing an SMB-based target system.

SMTP host

Server from which One Identity Manager Service sends email notifications. Prerequisite for sending mails using One Identity Manager Service is SMTP host configuration.

Default report server

Server on which reports are generated.

PowerShell connector

The server can run PowerShell version 3.0 or later.

Related topics
Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación