Chatta subito con l'assistenza
Chat con il supporto

Active Roles 8.0.1 LTS - Solutions Guide

Active Roles Solutions Overview Exchange Resource Forest Management Configuration Transfer Wizard Solution Active RolesSPML Provider Skype for Business Server Solution
Introducing Skype for Business Server User Management Supported Active Directory topologies User Management policy Master Account Management policy Access Templates for Skype for Business Server Deploying the Solution Managing Skype for Business Server Users
Management Pack for SCOM

Syntax

Cscript arsconfig.wsf [/?] /task:<'collect' | 'deploy' | 'rollback'> [/selection:"<filename.xml>"] [/package:"<filename.xml>"] [/map:"<filename.csv>"] [/verbose] [/log:"<filename>"] [/deletelog] [/server:<servername>] [/login:<username>] [/password:<userpassword>] [/danglingLinks:<'Stop' | 'Skip' | 'Deploy'>] [/ignoreLinks:<'0' | '1' | '2' | '3'>] [/ignoreErrors] [/upgrade]

Parameters

Table 1: Parameters

Parameter

Description

task

This is a required parameter which defines the type of task you want to perform by using this script.

Specify one of these parameter values:

  • 'collect' - Collects configuration data from the source Active Roles environment, and creates a configuration package file.
  • 'deploy' - Populates the target Active Roles instance with objects from a configuration package created earlier by Configuration Transfer Wizard.
  • 'rollback' - Reverts the configuration of the target Active Roles instance to the state it was in before deployment of the configuration package.

selection

The path and name of the XML file containing a list of the source configuration objects to be included in the configuration package.

This parameter is required when you use this script to create a configuration package. The XML file you specify in this parameter must be manually created before you run the script.

package

The full path to the configuration package XML file.

Add this parameter is you want to specify a custom name and location for the configuration package file. If you do not specify this parameter, the script assumes that the installation path, and the default package file name are used.

map

The name of the domain mapping file.

Add this parameter if you want the test domain names to be replaced with the production domain names, during configuration package deployment.

You can add this parameter only when you use this script to deploy a configuration package. The CSV file you specify in this parameter must be manually created before you run the script.

verbose

Enables log trace output.

If this parameter is not specified, then no information is displayed in the Command Prompt while the script is running.

log

Specifies the name of the trace output file. You can also specify a target location for the log file.

Add this parameter to create a log file with diagnostic information.

deletelog

Deletes the trace output file upon successful completion.

Add this parameter if you want the log file deleted if a task was completed with no errors.

server

The fully qualified domain name of the computer running the Administration Service to connect to.

If this parameter is not specified, the script attempts a connection to any available Administration Service.

login

The user logon name of the account with which you want to connect, in the form Domain\UserName, or in the form of a user principal name.

password

Password for the user logon name you specify in the login parameter.

danglingLinks

This parameter takes effect if the task parameter value is set to 'deploy', and specifies whether to deploy Access Template or Policy Object links, if any found in the package, that refer to objects which may fail to be resolved in the destination environment (dangling links). The acceptable parameter values are:

  • 'Stop' - The deployment process is not started if any dangling links are detected (default setting)
  • 'Skip' - The dangling links are not deployed in the destination environment
  • 'Deploy' - Deployment of the dangling links is attempted based on the data found in the package

ignoreLinks

Specifies whether to collect Access Template links and Policy Object links. This parameter can take any of the following values:

  • '0' - Collect all links (default setting).
  • '1' - Do not collect Policy Object links.
  • '2' - Do not collect Access Template links.
  • '3' - Do not collect Policy Object and Access Template links.

ignoreErrors

If this parameter is specified, the solution ignores any errors that can be encountered during the configuration deployment.

upgrade

If supplied together with /task:'deploy', preserves the existing links, policy parameters and scheduled task parameters. Without this parameter, the deployment of a configuration package replaces the existing links with the links found in the configuration package, and resets the policy and schedule task parameters to the default values.

Scenario: Transfer Active Roles configuration

This scenario explains how to use the ARSconfig command-line tool to transfer a set of configuration objects from a test Active Roles instance to a production instance.

Suppose you need to transfer the following configuration objects from a test Active Roles instance to a production Active Roles instance:

  • The Configuration/Access Templates/Common container, including all child objects stored in this container.
  • The Configuration/Managed Units/Development container, excluding the child objects stored in this container.
  • All child objects stored in the Script Modules/Corporate Policy/Priority Access container, but excluding the container itself.

Also, assume that the names of the domains managed by the test (source) Active Roles instance are test1.company.com and test2.company.com, and the two corresponding domains managed by the production (target) Active Roles instance are prod1.company.com and prod2.company.com.

To implement this scenario, complete the following steps:

  1. Create a list of the configuration objects to collect
  2. Create configuration data package
  3. Add domain mapping
  4. Deploy the configuration data package
Step 1: Creating a list of the configuration objects to package

In this step, you create a list of the configuration objects that you want to collect into the configuration package, and define how you want to collect their child objects.

To do that, create the selection.xml file, and save that file to the solution installation folder: <Active Roles installation folder>\Configuration Transfer Wizard\Scripts.

To clarify the file format, consider the following sample file that illustrates how to collect Access Templates, Managed Units, and Script Modules residing within specified containers:

<?xml version="1.0" encoding="utf-8"?>

<Configuration>

<include DN="CN=Common,CN=Access Templates,CN=Configuration" collectSelf="True" collectChildren="True"/>

<include DN="CN=Development,CN=Managed Units,CN=Configuration" collectSelf="True" collectChildren="False"/>

<include DN="CN=Priority Access,CN=Corporate Policy,CN=Script Modules,CN=Configuration" collectSelf="False" collectChildren="True"/>

</Configuration>

Step 2: Creating configuration data package file

In this step, you use the ARSconfig command-line tool to create a configuration data package file using the data from the selection.xml file created in Step 1.

To create the configuration data package file

  • At a command prompt, navigate to the Configuration Transfer Wizard installation folder, and enter the following syntax:

Cscript.exe arsconfig.wsf /task:collect /selection:selection.xml

As the result, the package.xml configuration data package file will be created in the following default location: <Active Roles installation folder>\Configuration Transfer Wizard\Scripts.

Step 3: Configuring domain mapping

If the names of the managed domains are different in the test and production environments, you must add domain mapping that defines the correspondence between the domain names. When the configuration package is deployed in the target environment, the domain names specified as a part of the objects' attributes are replaced with the names of the production domains, according to the name mapping entries.

In this step, you create the CSV domain name mapping file—mapping.csv, and then save that file to the solution installation folder: <Active Roles installation folder>\Configuration Transfer Wizard\Scripts. In this scenario, the mapping.csv file contains the following lines:

"DC=test1,DC=company,DC=com","DC=prod1,DC=company,DC=com"

"DC=test2,DC=company,DC=com","DC=prod2,DC=company,DC=com"

Step 4: Deploying the configuration data package

In this step, you use the ARSconfig command-line tool to deploy the package.xml configuration package in the production Active Roles environment. When running the arsconfig.wsf script, specify the package file to deploy (package.xml), and the domain name mapping file (mapping.csv) you have created in Step 3.

To deploy the package

  • At a command prompt, navigate to the Configuration Transfer Wizard installation folder, and enter the following syntax:

Cscript.exe arsconfig.wsf /task:deploy /package:package.xml /map:mapping.csv

Scenario: Rolling back the configuration changes

This step may be required if you have encountered any errors when deploying a configuration package in the production environment. By rolling back changes in the target configuration, you bring it to the state it was in before the package was deployed. Use the following instruction to roll back the changes made by the deployment of the package.xml file described in the scenario outlined above.

To roll back configuration changes

  • At the command prompt, navigate to the Configuration Transfer Wizard installation folder, and enter the following syntax:

Cscript.exe arsconfig.wsf /task:rollback /package:package.xml

Related Documents

The document was helpful.

Seleziona valutazione

I easily found the information I needed.

Seleziona valutazione