Table of Contents
dqtool — Display the contents of a disk-buffer file created with syslog-ng Open Source Edition
dqtool [command] [options]
NOTE: The dqtool application is distributed with the syslog-ng Open Source Edition system logging application, and is usually part of the syslog-ng package. The latest version of the syslog-ng application is available at the syslog-ng page.
This manual page is only an abstract, for the complete documentation of syslog-ng, see the syslog-ng Documentation page.
The dqtool application is a utility that can be used to display and format the messages stored in a disk-buffer file.
cat [options] [file]
Use the cat command to display the log messages stored in the disk-buffer (also called disk-queue) file, and also information from the header of the disk queue file. The messages are printed to the standard output (stdout), so it is possible to use grep and other tools to find particular log messages, e.g., dqtool cat /var/log/messages.lgs |grep 192.168.1.1.
The cat command has the following options:
Print diagnostic and debugging messages to stderr.
Display a brief help message.
Format the messages using the specified template.
Print verbose messages to stderr.
Display version information.
Example:
./dqtool cat ../var/syslog-ng-00000.qf
The output looks like:
Disk-buffer state loaded; filename='../var/syslog-ng-00000.qf', qout_length='65', qbacklog_length='0', qoverflow_length='9205', qdisk_length='0' Mar 3 10:52:05 tristram localprg[1234]: seq: 0000011630, runid: 1267609923, stamp: 2010-03-03T10:52:05 PADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADD Mar 3 10:52:05 tristram localprg[1234]: seq: 0000011631, runid: 1267609923, stamp: 2010-03-03T10:52:05 PADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADDPADD
For the detailed documentation of syslog-ng OSE see the syslog-ng Documentation page
If you experience any problems or need help with syslog-ng, visit the syslog-ng mailing list.
For news and notifications about of syslog-ng, visit the syslog-ng blogs.
Table of Contents
loggen — Generate syslog messages at a specified rate
loggen [options]target [port]
NOTE: The loggen application is distributed with the syslog-ng system logging application, and is usually part of the syslog-ng package. The latest version of the syslog-ng application is available at the syslog-ng page.
This manual page is only an abstract, for the complete documentation of syslog-ng, see the syslog-ng Documentation page.
The loggen application is tool to test and stress-test your syslog server and the connection to the server. It can send syslog messages to the server at a specified rate, using a number of connection types and protocols, including TCP, UDP, and unix domain sockets. The messages can be generated automatically (repeating the PADDstring over and over), or read from a file or the standard input.
When loggen finishes sending the messages, it displays the following statistics:
average rate: Average rate the messages were sent in messages/second.
count: The total number of messages sent.
time: The time required to send the messages in seconds.
average message size: The average size of the sent messages in bytes.
bandwidth: The average bandwidth used for sending the messages in kilobytes/second.
Number of connections loggen will use to send messages to the destination. This option is usable only when using TCP or TLS connections to the destination. Default value: 1
The loggen utility waits until every connection is established before starting to send messages. See also the --idle-connections option.
Send the statistics of the sent messages to stdout as CSV. This can be used for plotting the message rate.
Use datagram socket (UDP or unix-dgram) to send the messages to the target. Requires the --inet option as well.
Do not parse the lines read from the input files, send them as received.
Display a brief help message.
Number of idle connections loggen will establish to the destination. Note that loggen will not send any messages on idle connections, but the connection is kept open using keep-alive messages. This option is usable only when using TCP or TLS connections to the destination. See also the --active-connections option. Default value: 0
Use the TCP (by default) or UDP (when used together with the --dgram option) protocol to send the messages to the target.
The number of seconds loggen will run. Default value: 10
Note that when the --interval and --number are used together, loggen will send messages until the period set in --interval expires or the amount of messages set in --number is reached, whichever happens first.
Specify the destination using its IPv6 address. Note that the destination must have a real IPv6 address.
Read the file specified in --read-file option in loop: loggen will start reading from the beginning of the file when it reaches the end of the file.
Number of messages to generate.
Note that when the --interval and --number are used together, loggen will send messages until the period set in --interval expires or the amount of messages set in --number is reached, whichever happens first.
Do not use the framing of the IETF-syslog protocol style, even if the syslog-proto option is set.
Output statistics only when the execution of loggen is finished. If not set, the statistics are displayed every second.
Keep sending logs indefinitely, without time limit.
The number of messages generated per second for every active connection. Default value: 1000
Read the messages from a file and send them to the target. See also the --skip-tokens option.
Specify - as the input file to read messages from the standard input (stdio). Note that when reading messages from the standard input, loggen can only use a single thread. The -R - parameters must be placed at end of command, like: loggen 127.0.0.1 1061 --read-file -
Send the argument of the --sdata option as the SDATA part of IETF-syslog (RFC5424 formatted) messages. Use it together with the --syslog-proto option. For example: --sdata "[test name=\"value\"]
The size of a syslog message in bytes. Default value: 256. Minimum value: 127 bytes, maximum value: 8192 bytes.
Skip the specified number of space-separated tokens (words) at the beginning of every line. For example, if the messages in the file look like foo bar message, --skip-tokens 2 skips the foo bar part of the line, and sends only the message part. Works only when used together with the --read-file parameter. Default value: 0
Use a stream socket (TCP or unix-stream) to send the messages to the target.
Use the new IETF-syslog message format as specified in RFC5424. By default, loggen uses the legacy BSD-syslog message format (as described in RFC3164). See also the --no-framing option.
Use a UNIX domain socket to send the messages to the target.
Use an SSL-encrypted channel to send the messages to the target. Note that it is not possible to check the certificate of the target, or to perform mutual authentication.
Display version number of syslog-ng.
The following command generates 100 messages per second for ten minutes, and sends them to port 2010 of the localhost via TCP. Each message is 300 bytes long.
loggen --size 300 --rate 100 --interval 600 127.0.0.1 2010
The following command is similar to the one above, but uses the UDP protocol.
loggen --inet --dgram --size 300 --rate 100 --interval 600 127.0.0.1 2010
Send a single message on TCP6 to the ::1 IPv6 address, port 1061:
loggen --ipv6 --number 1 ::1 1061
Send a single message on UDP6 to the ::1 IPv6 address, port 1061:
loggen --ipv6 --dgram --number 1 ::1 1061
Send a single message using a unix domain-socket:
loggen --unix --stream --number 1 </path/to/socket>
Read messages from the standard input (stdio) and send them to the localhost:
loggen 127.0.0.1 1061 --read-file -
For the detailed documentation of syslog-ng OSE see the syslog-ng Documentation page
If you experience any problems or need help with syslog-ng, visit the syslog-ng mailing list.
For news and notifications about of syslog-ng, visit the syslog-ng blogs.
Table of Contents
pdbtool — An application to test and convert syslog-ng pattern database rules
pdbtool [command] [options]
This manual page is only an abstract, for the complete documentation of syslog-ng and pdbtool, see the syslog-ng Documentation page.
The syslog-ng application can match the contents of the log messages to a database of predefined message patterns (also called patterndb). By comparing the messages to the known patterns, syslog-ng is able to identify the exact type of the messages, tag the messages, and sort them into message classes. The message classes can be used to classify the type of the event described in the log message. The functionality of the pattern database is similar to that of the logcheck project, but the syslog-ng approach is faster, scales better, and is much easier to maintain compared to the regular expressions of logcheck.
The pdbtool application is a utility that can be used to:
convert an older pattern database to the latest database format
merge pattern databases into a single file
automatically create pattern databases from a large amount of log messages
dump the RADIX tree built from the pattern database (or a part of it) to explore how the pattern matching works.
dictionary [options]
Lists every name-value pair that can be set by the rules of the pattern database.
List the tags instead of the names of the name-value pairs.
Name of the pattern database file to use.
List only the name-value pairs that can be set for the messages of the specified $PROGRAM application.
dump [options]
Display the RADIX tree built from the patterns. This shows how are the patterns represented in syslog-ng and it might also help to track down pattern-matching problems. The dump utility can dump the tree used for matching the PROGRAM or the MESSAGE parts.
Enable debug/diagnostic messages on stderr.
Name of the pattern database file to use.
Displays the RADIX tree built from the patterns belonging to the ${PROGRAM} application.
Display the ${PROGRAM} tree.
Enable verbose messages on stderr.
Example and sample output:
pdbtool dump -p patterndb.xml -P 'sshd'
'p'
'assword for'
@QSTRING:@
'from'
@QSTRING:@
'port '
@NUMBER:@ rule_id='fc49054e-75fd-11dd-9bba-001e6806451b'
' ssh' rule_id='fc55cf86-75fd-11dd-9bba-001e6806451b'
'2' rule_id='fc4b7982-75fd-11dd-9bba-001e6806451b'
'ublickey for'
@QSTRING:@
'from'
@QSTRING:@
'port '
@NUMBER:@ rule_id='fc4d377c-75fd-11dd-9bba-001e6806451b'
' ssh' rule_id='fc5441ac-75fd-11dd-9bba-001e6806451b'
'2' rule_id='fc44a9fe-75fd-11dd-9bba-001e6806451b'
match [options]
Use the match command to test the rules in a pattern database. The command tries to match the specified message against the patterns of the database, evaluates the parsers of the pattern, and also displays which part of the message was parsed successfully. The command returns with a 0 (success) or 1 (no match) return code and displays the following information:
the class assigned to the message (that is, system, violation, and so on),
the ID of the rule that matched the message, and
the values of the parsers (if there were parsers in the matching pattern).
The match command has the following options:
Color the terminal output to highlight the part of the message that was successfully parsed.
Enable debug/diagnostic messages on stderr.
Print the debugging information returned by the --debug-pattern option as comma-separated values.
Print debugging information about the pattern matching. See also the --debug-csv option.
Process the messages of the specified log file with the pattern database. This option allows to classify messages offline, and to apply the pattern database to already existing logfiles. To read the messages from the standard input (stdin), specify a hyphen (-) character instead of a filename.
Print only messages matching the specified syslog-ng filter expression.
The text of the log message to match (only the ${MESSAGE} part without the syslog headers).
Name of the pattern database file to use.
Name of the program to use, as contained in the ${PROGRAM} part of the syslog message.
A syslog-ng template expression that is used to format the output messages.
Enable verbose messages on stderr.
Example: The following command checks if the patterndb.xml file recognizes the Accepted publickey for myuser from 127.0.0.1 port 59357 ssh2 message:
pdbtool match -p patterndb.xml -P sshd -M "Accepted publickey for myuser from 127.0.0.1 port 59357 ssh2"
The following example applies the sshd.pdb pattern database file to the log messages stored in the /var/log/messages file, and displays only the messages that received a useracct tag.
pdbtool match -p sshd.pdb \ –file /var/log/messages \ –filter ‘tags(“usracct”);’
merge [options]
Use the merge command to combine separate pattern database files into a single file (pattern databases are usually stored in separate files per applications to simplify maintenance). If a file uses an older database format, it is automatically updated to the latest format (V3). See the syslog-ng Documentation page for details on the different pattern database versions.
Enable debug/diagnostic messages on stderr.
The directory that contains the pattern database XML files to be merged.
Specify filenames to be merged using a glob pattern, for example, using wildcards. For details on glob patterns, see man glob. This pattern is applied only to the filenames, and not on directory names.
Name of the output pattern database file.
Merge files from subdirectories as well.
Enable verbose messages on stderr.
Example:
pdbtool merge --recursive --directory /home/me/mypatterns/ --pdb /var/lib/syslog-ng/patterndb.xml
Currently it is not possible to convert a file without merging, so if you only want to convert an older pattern database file to the latest format, you have to copy it into an empty directory.
patternize [options]
Automatically create a pattern database from a log file containing a large number of log messages. The resulting pattern database is printed to the standard output (stdout). The pdbtool patternize command uses a data clustering technique to find similar log messages and replacing the differing parts with @ESTRING:: @ parsers. For details on pattern databases and message parsers, see the syslog-ng Documentation page. The patternize command is available only in syslog-ng OSE version 3.2 and later.
Enable debug/diagnostic messages on stderr.
The logfile containing the log messages to create patterns from. To receive the log messages from the standard input (stdin), use -.
Recursively iterate on the log lines to cover as many log messages with patterns as possible.
The number of example log messages to include in the pattern database for every pattern. Default value: 1
Do not parse the input file, treat every line as the message part of a log message.
Include a generated name in the parsers, for example, .dict.string1, .dict.string2, and so on.
A pattern is added to the output pattern database if at least the specified percentage of log messages from the input logfile match the pattern. For example, if the input logfile contains 1000 log messages and the --support=3.0 option is used, a pattern is created only if the pattern matches at least 3 percent of the log messages (that is, 30 log messages). If patternize does not create enough patterns, try to decrease the support value.
Default value: 4.0
Enable verbose messages on stderr.
Example:
pdbtool patternize --support=2.5 --file=/var/log/messages
test [options]
Use the test command to validate a pattern database XML file. Note that you must have the xmllint application installed. The test command is available only in syslog-ng OSE version 3.2 and later.
Enable coloring in terminal output.
Enable debug/diagnostic messages on stderr.
Print debugging information on non-matching patterns.
Test only the patterndb rule (specified by its rule id) against its example.
Validate a pattern database XML file.
Enable verbose messages on stderr.
Example:
pdbtool test --validate /home/me/mypatterndb.pdb
The syslog-ng Documentation page
For the detailed documentation of syslog-ng OSE see the syslog-ng Documentation page
If you experience any problems or need help with syslog-ng, visit the syslog-ng mailing list.
For news and notifications about of syslog-ng, visit the syslog-ng blogs.
Table of Contents
syslog-ng-ctl — Display message statistics and enable verbose, debug and trace modes in syslog-ng Open Source Edition
syslog-ng-ctl [command] [options]
NOTE: The syslog-ng-ctl application is distributed with the syslog-ng Open Source Edition system logging application, and is usually part of the syslog-ng package. The latest version of the syslog-ng application is available at syslog-ng page.
This manual page is only an abstract, for the complete documentation of syslog-ng, see the syslog-ng Documentation page.
The syslog-ng-ctl application is a utility that can be used to:
enable/disable various syslog-ng messages for troubleshooting
display statistics about the processed messages
handling password-protected private keys
display the currently running configuration of syslog-ng OSE
reload the configuration of syslog-ng OSE.
command [options]
Use the syslog-ng-ctl <command> --set=on command to display verbose, trace, or debug messages. If you are trying to solve configuration problems, the verbose (and occasionally trace) messages are usually sufficient. Debug messages are needed mostly for finding software errors. After solving the problem, do not forget to turn these messages off using the syslog-ng-ctl <command> --set=off. Note that enabling debug messages does not enable verbose and trace messages.
Use syslog-ng-ctl <command> without any parameters to display whether the particular type of messages are enabled or not.
If you need to use a non-standard control socket to access syslog-ng, use the syslog-ng-ctl <command> --set=on --control=<socket> command to specify the socket to use.
Print verbose messages. If syslog-ng was started with the --stderr or -e option, the messages will be sent to stderr. If not specified, syslog-ng will log such messages to its internal source.
Print trace messages of how messages are processed. If syslog-ng was started with the --stderr or -e option, the messages will be sent to stderr. If not specified, syslog-ng will log such messages to its internal source.
Print debug messages. If syslog-ng was started with the --stderr or -e option, the messages will be sent to stderr. If not specified, syslog-ng will log such messages to its internal source.
Example:
syslog-ng-ctl verbose --set=on
The syslog-ng OSE application stores various data, metrics, and statistics in a hash table. Every property has a name and a value. For example:
[syslog-ng]
|
|_[destinations]-[network]-[tcp]->[stats]->{received=12;dropped=2}
|
|_[sources]-[sql]-[stats]->{received=501;dropped=0}
You can query the nodes of this tree, and also use filters to select the information you need. A query is actually a path in the tree. You can also use the ? and * wildcards. For example:
Select every property: *
Select all dropped value from every stats node: *.stats.dropped
The nodes and properties available in the tree depend on your syslog-ng OSE configuration (that is, the sources, destinations, and other objects you have configured), and also on your stats-level() settings.
syslog-ng-ctl query list
Use the syslog-ng-ctl query list command to display the list of metrics that syslog-ng OSE collects about the processed messages. For details about the displayed metrics, see The syslog-ng Administrator Guide???.
An example output:
center.received.stats.processed center.queued.stats.processed destination.java.d_elastic#0.java_dst(ElasticSearch,elasticsearch-syslog-ng-test,t7cde889529c034aea9ec_micek).stats.dropped destination.java.d_elastic#0.java_dst(ElasticSearch,elasticsearch-syslog-ng-test,t7cde889529c034aea9ec_micek).stats.processed destination.java.d_elastic#0.java_dst(ElasticSearch,elasticsearch-syslog-ng-test,t7cde889529c034aea9ec_micek).stats.queued destination.d_elastic.stats.processed source.s_tcp.stats.processed source.severity.7.stats.processed source.severity.0.stats.processed source.severity.1.stats.processed source.severity.2.stats.processed source.severity.3.stats.processed source.severity.4.stats.processed source.severity.5.stats.processed source.severity.6.stats.processed source.facility.7.stats.processed source.facility.16.stats.processed source.facility.8.stats.processed source.facility.17.stats.processed source.facility.9.stats.processed source.facility.18.stats.processed source.facility.19.stats.processed source.facility.20.stats.processed source.facility.0.stats.processed source.facility.21.stats.processed source.facility.1.stats.processed source.facility.10.stats.processed source.facility.22.stats.processed source.facility.2.stats.processed source.facility.11.stats.processed source.facility.23.stats.processed source.facility.3.stats.processed source.facility.12.stats.processed source.facility.4.stats.processed source.facility.13.stats.processed source.facility.5.stats.processed source.facility.14.stats.processed source.facility.6.stats.processed source.facility.15.stats.processed source.facility.other.stats.processed global.payload_reallocs.stats.processed global.msg_clones.stats.processed global.sdata_updates.stats.processed tag..source.s_tcp.stats.processed
The syslog-ng-ctl query list command has the following options:
Use --reset to set the selected counters to 0 after executing the query.
syslog-ng-ctl query get [options]
The syslog-ng-ctl query get <query> command lists the nodes that match the query, and their values.
For example, the "destination*" query lists the configured destinations, and the metrics related to each destination. An example output:
destination.java.d_elastic#0.java_dst(ElasticSearch,elasticsearch-syslog-ng-test,t7cde889529c034aea9ec_micek).stats.dropped=0 destination.java.d_elastic#0.java_dst(ElasticSearch,elasticsearch-syslog-ng-test,t7cde889529c034aea9ec_micek).stats.processed=0 destination.java.d_elastic#0.java_dst(ElasticSearch,elasticsearch-syslog-ng-test,t7cde889529c034aea9ec_micek).stats.queued=0 destination.d_elastic.stats.processed=0
The syslog-ng-ctl query get command has the following options:
Add up the result of each matching node and return only a single number.
For example, the syslog-ng-ctl query get --sum "destination*.dropped" command displays the number of messages dropped by the syslog-ng OSE instance.
Use --reset to set the selected counters to 0 after executing the query.
stats [options]
Use the stats command to display statistics about the processed messages. For details about the displayed statistics, see The syslog-ng Administrator Guide???. The stats command has the following options:
Specify the socket to use to access syslog-ng. Only needed when using a non-standard socket.
Reset all statistics to zero, except for the queued counters. (The queued counters show the number of messages in the message queue of the destination driver, waiting to be sent to the destination.)
Example:
syslog-ng-ctl stats
An example output:
src.internal;s_all#0;;a;processed;6445 src.internal;s_all#0;;a;stamp;1268989330 destination;df_auth;;a;processed;404 destination;df_news_dot_notice;;a;processed;0 destination;df_news_dot_err;;a;processed;0 destination;d_ssb;;a;processed;7128 destination;df_uucp;;a;processed;0 source;s_all;;a;processed;7128 destination;df_mail;;a;processed;0 destination;df_user;;a;processed;1 destination;df_daemon;;a;processed;1 destination;df_debug;;a;processed;15 destination;df_messages;;a;processed;54 destination;dp_xconsole;;a;processed;671 dst.tcp;d_network#0;10.50.0.111:514;a;dropped;5080 dst.tcp;d_network#0;10.50.0.111:514;a;processed;7128 dst.tcp;d_network#0;10.50.0.111:514;a;queued;2048 destination;df_syslog;;a;processed;6724 destination;df_facility_dot_warn;;a;processed;0 destination;df_news_dot_crit;;a;processed;0 destination;df_lpr;;a;processed;0 destination;du_all;;a;processed;0 destination;df_facility_dot_info;;a;processed;0 center;;received;a;processed;0 destination;df_kern;;a;processed;70 center;;queued;a;processed;0 destination;df_facility_dot_err;;a;processed;0
syslog-ng-ctl credentials [options]
The syslog-ng-ctl credentials status command allows you to query the status of the private keys that syslog-ng OSE uses in the network() and syslog() drivers. You can also provide the passphrase for password-protected private keys using the syslog-ng-ctl credentials add command. For details on using password-protected keys, see The syslog-ng Administrator Guide???.
syslog-ng-ctl credentials status [options]
The syslog-ng-ctl credentials status command allows you to query the status of the private keys that syslog-ng OSE uses in the network() and syslog() drivers. The command returns the list of private keys used, and their status. For example:
syslog-ng-ctl credentials status Secret store status: /home/user/ssl_test/client-1/client-encrypted.key SUCCESS
If the status of a key is PENDING, you must provide the passphrase for the key, otherwise syslog-ng OSE cannot use it. The sources and destinations that use these keys will not work until you provide the passwords. Other parts of the syslog-ng OSE configuration will be unaffected. You must provide the passphrase of the password-protected keys every time syslog-ng OSE is restarted.
The following log message also notifies you of PENDING passphrases:
Waiting for password; keyfile='private.key'
Specify the socket to use to access syslog-ng. Only needed when using a non-standard socket.
syslog-ng-ctl credentials add [options]
You can add the passphrase to a password-protected private key file using the following command. syslog-ng OSE will display a prompt for you to enter the passphrase. We recommend that you use this method.
syslog-ng-ctl credentials add --id=<path-to-the-key>
Alternatively, you can include the passphrase in the --secret parameter:
syslog-ng-ctl credentials add --id=<path-to-the-key> --secret=<passphrase-of-the-key>
Or you can pipe the passphrase to the syslog-ng-ctl command, for example:
echo "<passphrase-of-the-key>" | syslog-ng-ctl credentials add --id=<path-to-the-key>
Specify the socket to use to access syslog-ng. Only needed when using a non-standard socket.
The path to the password-protected private key file. This is the same path that you use in the key-file() option of the syslog-ng OSE configuration file.
The password or passphrase of the private key.
syslog-ng-ctl config [options]
Use the syslog-ng-ctl config command to display the configuration that syslog-ng OSE is currently running. Note by default, only the content of the main configuration file are displayed, included files are not resolved. To resolve included files and display the entire configuration, use the syslog-ng-ctl config --preprocess command.
syslog-ng-ctl reload [options]
Use the syslog-ng-ctl reload command to reload the configuration file of syslog-ng OSE without having to restart the syslog-ng OSE application. The syslog-ng-ctl reload works like a SIGHUP.
The syslog-ng Documentation page
For the detailed documentation of syslog-ng OSE see the syslog-ng Documentation page
If you experience any problems or need help with syslog-ng, visit the syslog-ng mailing list.
For news and notifications about of syslog-ng, visit the syslog-ng blogs.
© 2024 One Identity LLC. ALL RIGHTS RESERVED. Termini di utilizzo Privacy Cookie Preference Center