Device ID (DID)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdDeviceID |
Type: | Integer32 |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'DID' output in 'PD LIST'. |
Drive Group (DG)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdDriveGroup |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'DG' output in 'PD LIST'. |
Enclosure Device ID and Slot Number (EID:Slt)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdEnclosureDeviceIDAndSlotNumber |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'EID:Slt' output in 'PD LIST'. |
Interface (Intf)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdInterface |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'Intf' output in 'PD LIST'. |
Media Type (Med)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdMediaType |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'Med' output in 'PD LIST'. |
Model
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdModel |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'Model' output in 'PD LIST'. |
Protection Info (PI)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdProtectionInfo |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'PI' output in 'PD LIST'. |
Sector Size (SeSz)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdSectorSize |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'SeSz' output in 'PD LIST'. |
Self Encrypting Drive (SED)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdSelfEncryptingDrive |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'SED' output in 'PD LIST'. |
Size
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdSize |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'Size' output in 'PD LIST'. The size of the physical drive. |
Spun (Sp)
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdSpun |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'Sp' output in 'PD LIST'. |
State
SNMP object: | SSB-SNMP-MIB::ssbHardwareRaidPdState |
Type: | string |
Community (v2c) / Context (v3) |
System |
Short description: | The value of StorCLI's 'State' output in 'PD LIST'. |
SSB-SNMP-MIB::ssbHardwareRaidPDTable
For which systems and configurations is it applicable? | When this particular hardware supports this particular (T4, T10, S, M) RAID type. |
Value change frequency | The table's contents are not supposed to change (except for when one or more disks within the RAID fail, or in case of disk error). |
Related issues and issue indicators | In case of hardware error or disk error, one or more disks within the RAID may fail. In this case, the HotSpare will take the faulty disks' place and it is advisable to find out what caused disk failure. |
Solution:
- Replace faulty disk (for technical assistance, contact our Support Team, or an official supplier).