This section describes the possible upgrade paths of syslog-ng PE.
Upgrading from syslog-ng PE to syslog-ng OSE is unsupported since it counts as downgrading.
The installer displays the following message if you try to upgrade from complete syslog-ng PE to client setup syslog-ng PE with .run package.
This version of syslog-ng Premium Edition doesn't support storing messages in SQL servers, while the installed one did.
If you need to uninstall syslog-ng PE for some reason, you have the following options:
If you have installed syslog-ng PE using the .run installer: Execute the uninstall.sh script located at /opt/syslog-ng/bin/uninstall.sh
. The uninstall script will automatically restore the syslog daemon used before installing syslog-ng. To completely remove syslog-ng PE, including the configuration files, use the uninstall.sh --purge command.
If you have installed syslog-ng PE from a .deb package: Execute the dpkg -r syslog-ng-premium-edition command to remove syslog-ng, or the dpkg -P syslog-ng-premium-edition command to remove syslog-ng PE and the configuration files as well. Note that removing syslog-ng PE does not restore the syslog daemon used before syslog-ng.
If you have installed syslog-ng PE from an .rpm package: Execute the rpm -e syslog-ng-premium-edition command to remove syslog-ng PE. Note that removing syslog-ng PE does not restore the syslog daemon used before syslog-ng PE.
If you have installed syslog-ng PE from a .pkg package: Execute the pkgrm BBsyslng command to remove syslog-ng PE. Note that removing syslog-ng PE does not restore the syslog daemon used before syslog-ng.
For automatic uninstall (answering y
to all questions): Execute the yes | pkgrm BBsyslng command.
The following files have to be deleted manually:
<syslog-ng path>/etc/syslog-ng.conf
<syslog-ng path>/var/syslog-ng.persist
<syslog-ng path>/var/syslog-ng-00000.qf
anything else under the <syslog-ng path>/var
directory
This chapter provides a very brief introduction into configuring the syslog-ng PE application. For details on the format of the configuration file and how to configure sources, destinations, and other features, refer to the subsequent chapters.
To configure syslog-ng PE as a client that sends log messages to a central log server, see Procedure 4.1, “Configuring syslog-ng on client hosts”.
To configure syslog-ng PE as a server that receives log messages from client hosts, see Procedure 4.2, “Configuring syslog-ng on server hosts”.
To configure syslog-ng PE as a relay that receives log messages from client hosts and forwards them to a central log server, see Procedure 4.2, “Configuring syslog-ng on server hosts”.
Procedure 4.1. Configuring syslog-ng on client hosts
Purpose:
To configure syslog-ng on a client host, complete the following steps.
Steps:
Install the syslog-ng application on the host. For details installing syslog-ng on specific operating systems, see Chapter 3, Installing syslog-ng.
Configure the local sources to collect the log messages of the host. Starting with version 3.2, syslog-ng PE automatically collects the log messages that use the native system logging method of the platform, for example, messages from /dev/log
on Linux, or /dev/klog
on FreeBSD. For a complete list of messages that are collected automatically, see the section called “Collecting the system-specific log messages of a platform”.
Add sources to collect the messages from your log files. File sources look like this:
source s_myfilesource { file("/var/log/myapplication.log" follow-freq(1)); };
Name every source uniquely. For details on configuring file sources, see the section called “Collecting messages from text files”.
|
TIP:
Many applications send log messages to logfiles by default (for example, the Roundcube webmail client, or the ProFTPD FTP server), but can be configured to send them to syslog instead. If possible, it is recommended to reconfigure the application that way. |
|
NOTE:
The default configuration file of syslog-ng PE collects platform-specific log messages and the internal log messages of syslog-ng PE. source s_local { system(); internal(); }; |
Create a network destination that points directly to the syslog-ng server, or to a local relay. The network destination greatly depends on the protocol that your log server or relay accepts messages. Many systems still use the legacy BSD-syslog protocol (RFC3162) over the unreliable UDP transport:
destination d_network { network("10.1.2.3" transport("udp")); };
However, if possible, use the much more reliable IETF-syslog protocol over TCP transport:
destination d_network { syslog("10.1.2.3" transport("tcp")); };
Create a log statement connecting the local sources to the syslog-ng server or relay. For example:
log { source(s_local); destination(d_network); };
If the logs will also be stored locally on the host, create local file destinations.
|
NOTE:
The default configuration of syslog-ng PE places the collected messages into the destination d_local { file("/var/log/messages"); }; |
Create a log statement connecting the local sources to the file destination.
|
NOTE:
The default configuration of syslog-ng PE has only one log statement: log { source(s_local); destination(d_local); }; |
Set filters, macros and other features and options (for example TLS encryption) as necessary.
Example 4.2. A simple configuration for clients
The following configuration file collects local log messages and the log messages of syslog-ng PE, and forwards them to a log server using the IETF-syslog protocol.
@version: 6.0 @include "scl.conf" source s_local { system(); internal(); }; destination d_syslog_tcp { syslog("192.168.1.1" transport("tcp") port(2010)); }; log { source(s_local);destination(d_syslog_tcp); };
If you experience difficulties, see Chapter 19, Troubleshooting syslog-ng for tips on solving common problems.
Procedure 4.2. Configuring syslog-ng on server hosts
Purpose:
To configure syslog-ng on a server host, complete the following steps.
Steps:
Install the syslog-ng application on the host. For details installing syslog-ng on specific operating systems, see Chapter 3, Installing syslog-ng.
Starting with version 3.2, syslog-ng PE automatically collects the log messages that use the native system logging method of the platform, for example, messages from /dev/log
on Linux, or /dev/klog
on FreeBSD. For a complete list of messages that are collected automatically, see the section called “Collecting the system-specific log messages of a platform”.
Configure the network sources that collect the log messages sent by the clients and relays. How the network sources should be configured depends also on the capabilities of your client hosts: many older networking devices support only the legacy BSD-syslog protocol (RFC3164) using UDP transport:
source s_network { syslog(ip(10.1.2.3) transport("udp")); };
However, if possible, use the much more reliable TCP transport:
source s_network { syslog(ip(10.1.2.3) transport("tcp")); };
For other options, see the section called “Collecting messages using the IETF syslog protocol (syslog() driver)” and the section called “Collecting messages from remote hosts using the BSD syslog protocol”.
Create local destinations that will store the log messages, for example file- or program destinations. The default configuration of syslog-ng PE places the collected messages into the /var/log/messages
file:
destination d_local { file("/var/log/messages"); };
If you want to create separate logfiles for every client host, use the ${HOST}
macro when specifying the filename, for example:
destination d_local { file("/var/log/messages_${HOST}"); };
For details on further macros and how to use them, see Chapter 14, Manipulating messages.
Create a log statement connecting the sources to the local destinations.
log { source(s_local); source(s_network); destination(d_local); };
Set filters, options (for example TLS encryption) and other advanced features as necessary.
|
NOTE:
By default, the syslog-ng server will treat the relayed messages as if they were created by the relay host, not the host that originally sent them to the relay. In order to use the original hostname on the syslog-ng server, use the If you are relaying log messages and want to resolve IP addresses to hostnames, configure the first relay to do the name resolution. |
Example 4.3. A simple configuration for servers
The following is a simple configuration file for syslog-ng Premium Edition that collects incoming log messages and stores them in a text file.
@version: 6.0 @include "scl.conf" options { time-reap(30); mark-freq(10); keep-hostname(yes); }; source s_local { system(); internal(); }; source s_network { syslog(transport(tcp)); }; destination d_logs { file( "/var/log/syslog-ng/logs.txt" owner("root") group("root") perm(0777) ); }; log { source(s_local); source(s_network); destination(d_logs); };
If you experience difficulties, see Chapter 19, Troubleshooting syslog-ng for tips on solving common problems.
This section describes how to configure syslog-ng PE as a relay.
Procedure 4.3. Configuring syslog-ng on relay hosts
Purpose:
To configure syslog-ng on a relay host, complete the following steps:
Steps:
Install the syslog-ng application on the host. For details installing syslog-ng on specific operating systems, see Chapter 3, Installing syslog-ng.
Configure the network sources that collect the log messages sent by the clients.
Create a network destination that points to the syslog-ng server.
Create a log statement connecting the network sources to the syslog-ng server.
Configure the local sources that collect the log messages of the relay host.
Create a log statement connecting the local sources to the syslog-ng server.
Enable the keep-hostname()
and disable the chain-hostnames()
options. (For details on how these options work, see the section called “chain-hostnames()”.)
|
NOTE:
It is recommended to use these options on your syslog-ng PE server as well. |
Set filters and options (for example TLS encryption) as necessary.
|
NOTE:
By default, the syslog-ng server will treat the relayed messages as if they were created by the relay host, not the host that originally sent them to the relay. In order to use the original hostname on the syslog-ng server, use the If you are relaying log messages and want to resolve IP addresses to hostnames, configure the first relay to do the name resolution. |
Example 4.4. A simple configuration for relays
The following is a simple configuration file that collects local and incoming log messages and forwards them to a logserver using the IETF-syslog protocol.
@version: 6.0 @include "scl.conf" options { time-reap(30); mark-freq(10); keep-hostname(yes); chain-hostnames(no); }; source s_local { system(); internal(); }; source s_network { syslog(transport(tcp)); }; destination d_syslog_tcp { syslog("192.168.1.5" transport("tcp") port(2010)); }; log { source(s_local); source(s_network); destination(d_syslog_tcp); };
Depending on your exact needs about relaying log messages, there are many scenarios and syslog-ng PE options that influence how the log message will look like on the log server. Some of the most common cases are summarized in the following example.
Consider the following example: client-host > syslog-ng-relay > syslog-ng-server, where the IP address of client-host
is 192.168.1.2
. The client-host
device sends a syslog message to syslog-ng-relay
. Depending on the settings of syslog-ng-relay
, the following can happen.
By default, the keep-hostname()
option is disabled, so syslog-ng-relay
writes the IP address of the sender host (in this case, 192.168.1.2
) to the HOST field of the syslog message, discarding any IP address or hostname that was originally in the message.
If the keep-hostname()
option is enabled on syslog-ng-relay
, but name resolution is disabled (the use-dns()
option is set to no
), syslog-ng-relay
uses the HOST field of the message as-is, which is probably 192.168.1.2
.
To resolve the 192.168.1.2
IP address to a hostname on syslog-ng-relay
using a DNS server, use the keep-hostname(no)
and use-dns(yes)
options. If the DNS server is properly configured and reverse DNS lookup is available for the 192.168.1.2
address, syslog-ng PE will rewrite the HOST field of the log message to client-host
.
|
NOTE:
It is also possible to resolve IP addresses locally, without relying on the DNS server. For details on local name resolution, see Procedure 20.1, “Resolving hostnames locally”. |
The above points apply to the syslog-ng PE server (syslog-ng-server
) as well, so if syslog-ng-relay
is configured properly, use the keep-hostname(yes)
option on syslog-ng-server
to retain the proper HOST field. Setting keep-hostname(no)
on syslog-ng-server
would result in syslog-ng PE rewriting the HOST field to the address of the host that sent the message to syslog-ng-server
, which is syslog-ng-relay
in this case.
If you cannot or do not want to resolve the 192.168.1.2
IP address on syslog-ng-relay
, but want to store your log messages on syslog-ng-server
using the IP address of the original host (that is, client-host
), you can enable the spoof-source()
option on syslog-ng-relay
. However, spoof-source()
works only under the following conditions:
The syslog-ng application is configured by editing the syslog-ng.conf
file. Use any regular text editor application to modify the file.
On Linux and UNIX systems, the syslog-ng.conf
and license.txt
files are located in the /opt/syslog-ng/etc/
directory.
|
NOTE:
Earlier versions of syslog-ng PE stored the configuration and license files under different directories, depending on the platform, typically under |
|
NOTE:
On Microsoft Windows platforms the syslog-ng Agent for Windows stores its configuration in the system registry or in an XML file, and can be configured from a graphical interface. For details about the syslog-ng Agent for Windows, see Administration Guide for syslog-ng Agent for Windows. |
© ALL RIGHTS RESERVED. Feedback 利用規約 プライバシー Cookie Preference Center