Configure your RSA account for SPS
Configure SPS to use RADIUS multi-factor authentication
Prerequisites:
-
Your RADIUS secret and other RADIUS server parameters that are required for configuration.
-
Administrator access to SPS.
-
Make sure that you have all the required components listed in Technical requirements.
To configure SPS to use RADIUS multi-factor authentication
-
Download the SPS RADIUS (RSA) Multi-Factor Authentication plugin
SPS customers can download the official plugin from the Support Portal. The not officially supported plugins are also available on GitHub.
-
Upload the plugin to SPS
Upload the plugin to SPS. For details, see the Using a custom Authentication and Authorization plugin to authenticate on the target hosts in the Administration Guide.
-
Configure the plugin on SPS
The plugin includes a default configuration file, which is an ini-style configuration file with sections and name=value pairs. You can edit this configuration file on the Policies > with sections and name=value pairs. You can edit this configuration file on the Policies > AA AA Plugin Configurations page of the SPS web interface.
-
Configure the usermapping settings if needed. SPS must find out which RSA user belongs to the username of the authenticated connection. For that, it can query your LDAP/Microsoft Active Directory server. For details, see [USERMAPPING].
-
Configure other parameters of your plugin as needed for your environment. For details, see SPS RADIUS plugin parameter reference.
-
Configure a Connection policy and test it
Configure a Connection policy on SPS. In the AA plugin field of the Connection policy, select the SPS RADIUS plugin you configured in the previous step, then start a session to test it. For details on how a user can perform multi-factor authentication, see Perform multi-factor authentication with the SPS RADIUS plugin in terminal connections and Perform multi-factor authentication with the SPS RADIUS plugin in Remote Desktop (RDP) connections.
SPS RADIUS plugin parameter reference
This section describes the available options of the SPS RSA plugin.
The plugin uses an ini-style configuration file with sections and name=value pairs. This format consists of sections, led by a [section] header and followed by name=value entries. Note that the leading whitespace is removed from values. The values can contain format strings, which refer to other values in the same section. For example, the following section would resolve the %(dir)s value to the value of the dir entry (/var in this case).
[section name]
dirname=%(dir)s/mydirectory
dir=/var
All reference expansions are done on demand. Lines beginning with # or ; are ignored and may be used to provide comments.
You can edit the configuration file from the SPS web interface. The following code snippet is a sample configuration file.
Sample configuration file
[radius]
server=<radius-server-ip-or-hostname>
port=1812
secret=$
auth_type=pap
conn_retries=3
conn_timeout=5
[auth]
prompt=Press Enter for push notification or type one-time password:
disable_echo=no
[connection_limit by=client_ip_gateway_user]
limit=0
[authentication_cache]
hard_timeout=90
soft_timeout=15
reuse_limit=0
######[WHITELIST]######
[whitelist source=user_list]
name=<name-of-user-list-policy>
[whitelist source=ldap_server_group]
allow=no_user
except=<group-1>,<group-2>
######[USERMAPPING]######
[usermapping source=explicit]
<user-name-1>=<id-1>
<user-name-2>=<id-2>
[usermapping source=ldap_server]
user_attribute=description
[username_transform]
append_domain=<domain-without-@-character>
[ldap_server]
name=<name-of-LDAP-server-policy>
[credential_store]
name=<name-of-credential-store-policy-that-hosts-sensitive-data>
[logging]
log_level=info
[https_proxy]
server=<proxy-server-name-or-ip>
port=3128
[question_1]
prompt=<prompt-to-show-to-the-user>
key=<target-key-for-the-answer>
disable_echo=yes
This section contains the options related to your RADIUS (RSA) connectivity.
Declaration
[radius]
server=<radius-server-ip-or-hostname>
port=1812
secret=<$-or-shared-secret-with-radius-server>
auth_type=pap
conn_retries=3
conn_timeout=5
server
| Type: |
string |
| Required: |
yes |
| Default: |
N/A |
Description: The name of your server where the RADIUS interface is available. Enter either the IP address or the hostname.
secret
| Type: |
string |
| Required: |
yes |
| Default: |
N/A |
|
|
Caution:
This parameter contains sensitive data. Make sure to store this data in your local Credential Store. Type the $ value for this parameter in production.
For details, see Store sensitive plugin data securely.
Only enter a value different than $ for this parameter in the configuration for testing purposes in a secure, non-production environment. |
Description: Your RADIUS shared secret. SPS uses this to communicate with the RADIUS server. For details on using a local Credential Store to host this data, read Store sensitive plugin data securely.
port
| Type: |
integer |
| Required: |
no |
| Default: |
1812 |
Description: The port where the RADIUS server is listening for access requests.
auth_type
| Type: |
string (chap | pap) |
| Required: |
no |
| Default: |
pap |
Description: RADIUS authentication type.
-
chap: CHAP (Challenge-Handshake Authentication Protocol) is a more secure authentication scheme than PAP. In a CHAP scheme, the following process establishes a user identity:
-
After the link between the user machine and the authenticating server is established, the server sends a challenge message to the connection requester. The requester responds with a value obtained by using a one-way hash function.
-
The server checks the response by comparing it against its own calculation of the expected hash value.
-
If the values match, the authentication is acknowledged, otherwise the connection is terminated.
At any time, the server can request the connected party to send a new challenge message. CHAP identifiers are changed frequently and the server can make an authentication request at any time.
-
pap: The Password Authentication Protocol (PAP) provides a simple method for a user to authenticate using a two-way handshake. PAP only executes this process when establishing the initial link to the authenticating server. A user machine repeatedly sends an ID/Password pair to the authenticating server until authentication is acknowledged or the connection is terminated.
Use PAP authentication where a plain text password must be available to simulate a login at a remote host. This method provides a similar level of security to the usual user login at the remote host.
conn_timeout
| Type: |
integer [in seconds] |
| Required: |
no |
| Default: |
10 |
Description: Number of seconds to wait for an answer at each retry.
conn_retries
| Type: |
integer |
| Required: |
no |
| Default: |
3 |
Description: Number of times to retry sending a RADIUS request if the communication fails.
