By default, syslog-ng OSE parses every message using the syslog-parser as a syslog message, and fills the macros with values of the message. The syslog-parser does not discard messages: the message cannot be parsed as a syslog message, the entire message (including its header) is stored in the $MSG macro. If you do not want to parse the message as a syslog message, use the flags(no-parse) option of the source.
You can also use the syslog-parser to explicitly parse a message, or a part of a message as a syslog message (for example, after rewriting the beginning of a message that does not comply with the syslog standards).
For example, suppose that you have a single network source that receives log messages from different devices, and some devices send messages that are not RFC-compliant (some routers are notorious for that). To solve this problem in earlier versions of syslog-ng OSE, you had to create two different network sources using different IP addresses or ports: one that received the RFC-compliant messages, and one that received the improperly formatted messages (for example, using the flags(no-parse) option). Using junctions this becomes much more simple: you can use a single network source to receive every message, then use a junction and two channels. The first channel processes the RFC-compliant messages, the second everything else. At the end, every message is stored in a single file. The filters used in the example can be host() filters (if you have a list of the IP addresses of the devices sending non-compliant messages), but that depends on your environment.
log { source { syslog( ip(10.1.2.3) transport("tcp") flags(no-parse) ); }; junction { channel { filter(f_compliant_hosts); parser { syslog-parser(); }; }; channel { filter(f_noncompliant_hosts); }; }; destination { file("/var/log/messages"); }; };
Since every channel receives every message that reaches the junction, use the flags(final) option in the channels to avoid the unnecessary processing the messages multiple times:
log { source { syslog( ip(10.1.2.3) transport("tcp") flags(no-parse) ); }; junction { channel { filter(f_compliant_hosts); parser { syslog-parser(); }; flags(final); }; channel { filter(f_noncompliant_hosts); flags(final); }; }; destination { file("/var/log/messages"); }; };
Note that syslog-ng OSE has several parsers that you can use to parse non-compliant messages. You can even write a custom syslog-ng parser in Python. For details, see parser: Parse and segment structured messages.
Note that by default, the syslog-parser attempts to parse the message as an RFC3164-formatted (BSD-syslog) message. To parse the message as an RFC5424-formatted message, use the flags(syslog-protocol) option in the parser.
syslog-parser(flags(syslog-protocol));
The syslog-parser has the following options.
Type: | facility string |
Default: | kern |
Description: This parameter assigns a facility value to the messages received from the file source if the message does not specify one.
Type: | priority string |
Default: |
Description: This parameter assigns an emergency level to the messages received from the file source if the message does not specify one. For example, default-priority(warning).
Type: | assume-utf8, empty-lines, expect-hostname, kernel, no-hostname, no-multi-line, no-parse, sanitize-utf8, store-legacy-msghdr, store-raw-message, syslog-protocol, validate-utf8 |
Default: | empty set |
Description: Specifies the log parsing options of the source.
assume-utf8: The assume-utf8 flag assumes that the incoming messages are UTF-8 encoded, but does not verify the encoding. If you explicitly want to validate the UTF-8 encoding of the incoming message, use the validate-utf8 flag.
empty-lines: Use the empty-lines flag to keep the empty lines of the messages. By default, syslog-ng OSE removes empty lines automatically.
expect-hostname: If the expect-hostname flag is enabled, syslog-ng OSE will assume that the log message contains a hostname and parse the message accordingly. This is the default behavior for TCP sources. Note that pipe sources use the no-hostname flag by default.
guess-timezone: Attempt to guess the timezone of the message if this information is not available in the message. Works when the incoming message stream is close to real time, and the timezone information is missing from the timestamp.
kernel: The kernel flag makes the source default to the LOG_KERN | LOG_NOTICE priority if not specified otherwise.
no-hostname: Enable the no-hostname flag if the log message does not include the hostname of the sender host. That way syslog-ng OSE assumes that the first part of the message header is ${PROGRAM} instead of ${HOST}. For example:
source s_dell { network( port(2000) flags(no-hostname) ); };
no-multi-line: The no-multi-line flag disables line-breaking in the messages: the entire message is converted to a single line. Note that this happens only if the underlying transport method actually supports multi-line messages. Currently the file() and pipe() drivers support multi-line messages.
no-parse: By default, syslog-ng OSE parses incoming messages as syslog messages. The no-parse flag completely disables syslog message parsing and processes the complete line as the message part of a syslog message. The syslog-ng OSE application will generate a new syslog header (timestamp, host, and so on) automatically and put the entire incoming message into the MESSAGE part of the syslog message (available using the ${MESSAGE} macro). This flag is useful for parsing messages not complying to the syslog format.
If you are using the flags(no-parse) option, then syslog message parsing is completely disabled, and the entire incoming message is treated as the ${MESSAGE} part of a syslog message. In this case, syslog-ng OSE generates a new syslog header (timestamp, host, and so on) automatically. Note that since flags(no-parse) disables message parsing, it interferes with other flags, for example, disables flags(no-multi-line).
dont-store-legacy-msghdr: By default, syslog-ng stores the original incoming header of the log message. This is useful if the original format of a non-syslog-compliant message must be retained (syslog-ng automatically corrects minor header errors, for example, adds a whitespace before msg in the following message: Jan 22 10:06:11 host program:msg). If you do not want to store the original header of the message, enable the dont-store-legacy-msghdr flag.
sanitize-utf8: When using the sanitize-utf8 flag, syslog-ng OSE converts non-UTF-8 input to an escaped form, which is valid UTF-8.
store-raw-message: Save the original message as received from the client in the ${RAWMSG} macro. You can forward this raw message in its original form to another syslog-ng node using the syslog-ng() destination, or to a SIEM system, ensuring that the SIEM can process it. Available only in
syslog-protocol: The syslog-protocol flag specifies that incoming messages are expected to be formatted according to the new IETF syslog protocol standard (RFC5424), but without the frame header. Note that this flag is not needed for the syslog driver, which handles only messages that have a frame header.
validate-utf8: The validate-utf8 flag enables encoding-verification for messages formatted according to the new IETF syslog standard (for details, see IETF-syslog messages). If the
Synopsis: | template("${<macroname>}") |
Description: The macro that contains the part of the message that the parser will process. It can also be a macro created by a previous parser of the log path. By default, the parser processes the entire message (${MESSAGE}).
The syslog-ng OSE application can separate parts of log messages (that is, the contents of the ${MESSAGE} macro) at delimiter characters or strings to named fields (columns). One way to achieve this is to use a csv (comma-separated-values) parser (for other methods and possibilities, see the other sections of parser: Parse and segment structured messages. The parsed fields act as user-defined macros that can be referenced in message templates, file- and tablenames, and so on.
Parsers are similar to filters: they must be defined in the syslog-ng OSE configuration file and used in the log statement. You can also define the parser inline in the log path.
The order of filters, rewriting rules, and parsers in the log statement is important, as they are processed sequentially.
To create a csv-parser(), you have to define the columns of the message, the separator characters or strings (also called delimiters, for example, semicolon or tabulator), and optionally the characters that are used to escape the delimiter characters (quote-pairs()).
parser <parser_name> { csv-parser( columns(column1, column2, ...) delimiters(chars("<delimiter_characters>"), strings("<delimiter_strings>")) ); };
Column names work like macros.
Names starting with a dot (for example, .example) are reserved for use by syslog-ng OSE. If you use such a macro name as the name of a parsed value, it will attempt to replace the original value of the macro (note that only soft macros can be overwritten, see Hard versus soft macros for details). To avoid such problems, use a prefix when naming the parsed values, for example, prefix(my-parsed-data.)
The following example separates hostnames like example-1 and example-2 into two parts.
parser p_hostname_segmentation { csv-parser(columns("HOSTNAME.NAME", "HOSTNAME.ID") delimiters("-") flags(escape-none) template("${HOST}")); }; destination d_file { file("/var/log/messages-${HOSTNAME.NAME:-examplehost}"); }; log { source(s_local); parser(p_hostname_segmentation); destination(d_file); };
The following parser processes the log of Apache web servers and separates them into different fields. Apache log messages can be formatted like:
"%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %T %v"
Here is a sample message:
192.168.1.1 - - [31/Dec/2007:00:17:10 +0100] "GET /cgi-bin/example.cgi HTTP/1.1" 200 2708 "-" "curl/7.15.5 (i4 86-pc-linux-gnu) libcurl/7.15.5 OpenSSL/0.9.8c zlib/1.2.3 libidn/0.6.5" 2 example.mycompany
To parse such logs, the delimiter character is set to a single whitespace (delimiters(" ")). Whitespaces between quotes and brackets are ignored (quote-pairs('""[]')).
parser p_apache { csv-parser( columns("APACHE.CLIENT_IP", "APACHE.IDENT_NAME", "APACHE.USER_NAME", "APACHE.TIMESTAMP", "APACHE.REQUEST_URL", "APACHE.REQUEST_STATUS", "APACHE.CONTENT_LENGTH", "APACHE.REFERER", "APACHE.USER_AGENT", "APACHE.PROCESS_TIME", "APACHE.SERVER_NAME") flags(escape-double-char,strip-whitespace) delimiters(" ") quote-pairs('""[]') ); };
The results can be used for example, to separate log messages into different files based on the APACHE.USER_NAME field. If the field is empty, the nouser name is assigned.
log { source(s_local); parser(p_apache); destination(d_file); }; destination d_file { file("/var/log/messages-${APACHE.USER_NAME:-nouser}"); };
Multiple parsers can be used to split a part of an already parsed message into further segments. The following example splits the timestamp of a parsed Apache log message into separate fields.
parser p_apache_timestamp { csv-parser( columns("APACHE.TIMESTAMP.DAY", "APACHE.TIMESTAMP.MONTH", "APACHE.TIMESTAMP.YEAR", "APACHE.TIMESTAMP.HOUR", "APACHE.TIMESTAMP.MIN", "APACHE.TIMESTAMP.SEC", "APACHE.TIMESTAMP.ZONE") delimiters("/: ") flags(escape-none) template("${APACHE.TIMESTAMP}") ); }; log { source(s_local); parser(p_apache); parser(p_apache_timestamp); destination(d_file); };
For an example on using the greedy option, see Example: Adding the end of the message to the last column.
The syslog-ng OSE application can separate parts of log messages (that is, the contents of the ${MESSAGE} macro) at delimiter characters or strings to named fields (columns). One way to achieve this is to use a csv (comma-separated-values) parser (for other methods and possibilities, see the other sections of parser: Parse and segment structured messages. The parsed fields act as user-defined macros that can be referenced in message templates, file- and tablenames, and so on.
Parsers are similar to filters: they must be defined in the syslog-ng OSE configuration file and used in the log statement. You can also define the parser inline in the log path.
The order of filters, rewriting rules, and parsers in the log statement is important, as they are processed sequentially.
To create a csv-parser(), you have to define the columns of the message, the separator characters or strings (also called delimiters, for example, semicolon or tabulator), and optionally the characters that are used to escape the delimiter characters (quote-pairs()).
parser <parser_name> { csv-parser( columns(column1, column2, ...) delimiters(chars("<delimiter_characters>"), strings("<delimiter_strings>")) ); };
Column names work like macros.
Names starting with a dot (for example, .example) are reserved for use by syslog-ng OSE. If you use such a macro name as the name of a parsed value, it will attempt to replace the original value of the macro (note that only soft macros can be overwritten, see Hard versus soft macros for details). To avoid such problems, use a prefix when naming the parsed values, for example, prefix(my-parsed-data.)
Synopsis: | columns("PARSER.COLUMN1", "PARSER.COLUMN2", ...) |
Description: Specifies the name of the columns to separate messages to. These names will be automatically available as macros. The values of these macros do not include the delimiters.
Synopsis: |
delimiters(chars("<delimiter_characters>")) or delimiters("<delimiter_characters>") delimiters(strings("<delimiter_string1>", "<delimiter_string2>", ...)") delimiters(chars("<delimiter_characters>"), strings("<delimiter_string1>")) |
Description: The delimiter is the character or string that separates the columns in the message. If you specify multiple characters using the delimiters(chars("<delimiter_characters>")) option, every character will be treated as a delimiter. To separate the columns at the tabulator (tab character), specify \t. For example, to separate the text at every hyphen (-) and colon (:) character, use delimiters(chars("-:")), Note that the delimiters will not be included in the column values.
If you have to use a string as a delimiter, list your string delimiters in the delimiters(strings("<delimiter_string1>", "<delimiter_string2>", ...)") format.
By default, syslog-ng OSE uses space as a delimiter. If you want to use only the strings as delimiters, you have to disable the space delimiter, for example: delimiters(chars(""), strings("<delimiter_string>"))
Otherwise, syslog-ng OSE will use the string delimiters in addition to the default character delimiter, so delimiters(strings("==")) actually equals delimiters(chars(" "), strings("==")), and not delimiters(chars(""), strings("=="))
If you use more than one delimiter, note the following points:
syslog-ng OSE will split the message at the nearest possible delimiter. The order of the delimiters in the configuration file does not matter.
You can use both string delimiters and character delimiters in a parser.
The string delimiters can include characters that are also used as character delimiters.
If a string delimiter and a character delimiter both match at the same position of the message, syslog-ng OSE uses the string delimiter.
Synopsis: | escape-none|escape-backslash|escape-double-char |
Description: Specifies how to handle escaping in the parsed message. The following values are available. Default value: escape-none
escape-backslash: The parsed message uses the backslash (\) character to escape quote characters.
escape-double-char: The parsed message repeats the quote character when the quote character is used literally. For example, to escape a comma (,), the message contains two commas (,,).
escape-none: The parsed message does not use any escaping for using the quote character literally.
parser p_demo_parser { csv-parser( prefix(".csv.") delimiters(" ") dialect(escape-backslash) flags(strip-whitespace, greedy) columns("column1", "column2", "column3") ); };
Synopsis: | drop-invalid, escape-none, escape-backslash, escape-double-char, greedy, strip-whitespace |
Description: Specifies various options for parsing the message. The following flags are available:
drop-invalid: When the drop-invalid option is set, the parser does not process messages that do not match the parser. For example, a message does not match the parser if it has less columns than specified in the parser, or it has more columns but the greedy flag is not enabled. Using the drop-invalid option practically turns the parser into a special filter, that matches messages that have the predefined number of columns (using the specified delimiters).
Messages dropped as invalid can be processed by a fallback log path. For details on the fallback option, see Log path flags.
escape-backslash: The parsed message uses the backslash (\) character to escape quote characters.
escape-double-char: The parsed message repeats the quote character when the quote character is used literally. For example, to escape a comma (,), the message contains two commas (,,).
escape-none: The parsed message does not use any escaping for using the quote character literally.
greedy: The greedy option assigns the remainder of the message to the last column, regardless of the delimiter characters set. You can use this option to process messages where the number of columns varies.
If the greedy option is enabled, the syslog-ng application adds the not-yet-parsed part of the message to the last column, ignoring any delimiter characters that may appear in this part of the message.
For example, you receive the following comma-separated message: example 1, example2, example3, and you segment it with the following parser:
csv-parser(columns("COLUMN1", "COLUMN2", "COLUMN3") delimiters(","));
The COLUMN1, COLUMN2, and COLUMN3 variables will contain the strings example1, example2, and example3, respectively. If the message looks like example 1, example2, example3, some more information, then any text appearing after the third comma (that is, some more information) is not parsed, and possibly lost if you use only the variables to reconstruct the message (for example, to send it to different columns of an SQL table).
Using the greedy flag will assign the remainder of the message to the last column, so that the COLUMN1, COLUMN2, and COLUMN3 variables will contain the strings example1, example2, and example3, some more information.
csv-parser(columns("COLUMN1", "COLUMN2", "COLUMN3") delimiters(",") flags(greedy));
strip-whitespace: The strip-whitespace flag removes leading and trailing whitespaces from all columns.
Synopsis: | string |
Description: If the value of a column is the value of the null() parameter, syslog-ng OSE changes the value of the column to an empty string. For example, if the columns of the message contain the "N/A" string to represent empty values, you can use the null("N/A") option to change these values to empty stings.
Synopsis: | prefix() |
Description: Insert a prefix before the name part of the parsed name-value pairs to help further processing. For example:
To insert the my-parsed-data. prefix, use the prefix(my-parsed-data.) option.
To refer to a particular data that has a prefix, use the prefix in the name of the macro, for example, ${my-parsed-data.name}.
If you forward the parsed messages using the IETF-syslog protocol, you can insert all the parsed data into the SDATA part of the message using the prefix(.SDATA.my-parsed-data.) option.
Names starting with a dot (for example, .example) are reserved for use by syslog-ng OSE. If you use such a macro name as the name of a parsed value, it will attempt to replace the original value of the macro (note that only soft macros can be overwritten, see Hard versus soft macros for details). To avoid such problems, use a prefix when naming the parsed values, for example, prefix(my-parsed-data.)
Synopsis: | quote-pairs('<quote_pairs>') |
Description: List quote-pairs between single quotes. Delimiter characters or strings enclosed between quote characters are ignored. Note that the beginning and ending quote character does not have to be identical, for example, [} can also be a quote-pair. For an example of using quote-pairs() to parse Apache log files, see Example: Parsing Apache log files.
Synopsis: | template("${<macroname>}") |
Description: The macro that contains the part of the message that the parser will process. It can also be a macro created by a previous parser of the log path. By default, the parser processes the entire message (${MESSAGE}).
For examples, see Example: Segmenting hostnames separated with a dash and Example: Segmenting a part of a message.
© ALL RIGHTS RESERVED. Feedback 이용 약관 개인정보 보호정책 Cookie Preference Center