Chat now with support
Chat with Support

We are currently experiencing issues on our phone support and are working diligently to restore services. For support, please sign in and create a case or email supportadmin@quest.com for assistance

Identity Manager 8.1.4 - Web Designer Reference Guide

The Web Designer editor Web Designer structures and functions The Web Designer object model Working with the Web Designer Web project configuration options Customizing the Web Portal Basics of Web Designer programming Compiling and debugging Monitoring Frequent tasks in the Web Portal

Parameter type "Property list"

The configuration key for the "Property list" parameter type can, for example, be used to modify columns in the Address Book view that is displayed in the Web Portal.

This chapter describes how to edit a configuration key value. Declaring a configuration key is covered in another section of this guide. For more information, see Declaring configuration keys in modules and components.

To edit the configuration key value for the "Property list" parameter type in the "Settings..." view

NOTE: Before you can edit the values in a database column, you must add a matching entry in Configuration (custom). You can recognize this entry because it is marked with an X in the Value (custom) column in the list of configuration keys in the Settings... view of the selected database object.

  1. Open the required database object in the definition tree view and select the Settings... view.
  2. In the Settings... view, select the configuration key of the "Property list" parameter type that you created previously in the Object definitions view.

    NOTE: If you want to see more details for a configuration key without editing the value, open Configure dashboard display by clicking without converting the value in the Value (custom) column beforehand. This read mode is available for configuration keys with "Configuration object" and "Property list" parameter types.

  3. Enter the value - Is equivalent to standard value in the Value (custom) column, by clicking .
  4. Open the Database column selection dialog by clicking .

    On the left-hand side, all selectable columns of the preset table are displayed. On the right-hand side, all columns in use are displayed.

  1. Mark the relevant entry in the list of available columns and click .

    The marked entry is displayed in the list of used columns. The following fields and options for editing selected columns are displayed in the lower part of the dialog.

    Table 37: Settings for database columns
    Setting Description
    Condition

    SQL field specifying the condition.

    Property

    This setting makes properties available.

    Enable the setting and select a property.

    Expression SQL field for entering an expression.
    Database table for simulated foreign key references SQL field for entering a database table for simulated foreign key references.
    Name of column for simulated foreign keys SQL field for entering a column name for simulated foreign key references.
    Comment Field for entering a comment on using a database column.
    Component for editing a value

    This setting makes components for editing a value available.

    Enable the setting and select a component.

    Component for displaying a value

    This setting makes components for displaying a value available.

    Enable the setting and select a component.

    Foreign key candidate filter SQL field for entering a foreign key candidate filter.
    Expression for display values SQL field for entering an expression for a display value.
    Descriptive text SQL field for entering a descriptive text.
    Name SQL field for entering a caption.
    Property values are not editable SQL field for entering non-editable property values.
    Maximum number of characters Field for imposing a maximum on the number of characters used.
    Minimum number of characters Field for imposing a minimum on the number of characters used.
    Control-ID* Field for entering a Control-ID*.
    NOTE: Using the button, you can specify that the database column display name be used. If you click again, the original database column name is displayed.
  2. Configure your settings.
  3. Save the changes.

To add a validation node to a database column

  1. In the Database column selection dialog, select the relevant database column.
  2. In the toolbar, click and select the Validation item.

    A new validation node is added under the marked entry and a number of edit boxes are displayed. For more information, see Table 37.

  3. Configure your settings.
  4. Save the changes.

To add a parameter to a database column

  1. In the Database column selection dialog, select the relevant database column.
  2. In the toolbar, click and select the Parameter item from the context menu.

    A new parameter is added under the marked entry and a number of edit boxes are displayed.

  3. Enter an identifier for the new parameter in the Identifier* field using the button.
  4. Enter a value for the new parameter in the Value* field using the button.
  5. Save the changes.
NOTE: Added validation nodes or parameters can be deleted using the button. This button is only enabled if you have added new properties.

Parameter type "Image"

You can use the configuration key of the "Image" parameter type for logos, for example.

This chapter describes how to edit a configuration key value. Declaring a configuration key is covered in another section of this guide. For more information, see Declaring configuration keys in modules and components.

To edit a configuration key value of the "Image" parameter type in the "Settings..." view

NOTE: Before you can edit the values in a database column, you must add a matching entry in Configuration (custom). You can recognize this entry because it is marked with an X in the Value (custom) column in the list of configuration keys in the Settings... view of the selected database object.
  1. Open the required database object in the definition tree view and select the Settings... view.
  2. In the Settings... view, select the configuration key of the "Image" parameter type that you created previously in the Object definitions view.
  3. Enter the value - Is equivalent to standard value in the Value (custom) column, by clicking .
  4. Perform one of the following tasks:
    1. In the Use image from resource field, select an image.

      Your selection is shown in the Image preview.

      NOTE: Only images that have already been loaded once are available in Use image from resource.

    2. In the Use stock image field, select an image.
  5. In the Large field, select the size of the image.

    In Configure project, you can see the file name of the selected image and the method of loading the image, in Value (custom).

    NOTE: Use Delete to remove your selection again.

Parameter type "Configuration Objects"

The configuration key of the "Configuration Object" parameter type is used when you want to add or remove statistics.

This chapter describes how to edit a configuration key value. Declaring a configuration key is covered in another section of this guide. For more information, see Declaring configuration keys in modules and components.

To edit the configuration key value for the "Configuration objects" parameter type in the "Settings..." view

NOTE: Before you can edit the values in a database column, you must add a matching entry in Configuration (custom). You can recognize this entry because it is marked with an X in the Value (custom) column in the list of configuration keys in the Settings... view of the selected database object.
  1. Open the required database object in the definition tree view and select the Settings... view.
  2. In the Settings... view, select the configuration key of the "Configuration objects" parameter that you created previously in the Object definitions view.

    NOTE: If you want to see more details for a configuration key without editing the value, open Configure dashboard display by clicking without converting the value in the Value (custom) column beforehand. This read mode is available for configuration keys with "Configuration object" and "Property list" parameter types.

  3. Enter the value - Is equivalent to standard value in the Value (custom) column, by clicking .
  4. Open the Configure dashboard display dialog by clicking .

    In this window, you can view the statistics and heatmaps for the selected element. The following functions are available in this dialog.

    Table 38: Functions in the "Configure dashboard display" dialog
    Function Description

    Opens Select statistics.

    You can select and add statistics in the list of available statistics. Multi-select is available.

    Deletes marked statistics from the list of statistics used.

    Moves the marked statistics higher in the list of statistics used.
    Moves the marked statistics lower in the list of statistics used.
    Table 39: Functions in the "Select statistics" dialog
    Function Description
    Shows you all the global statistics from the list of available statistics.
    Shows you all object-related statistics from the list of available statistics.

    TIP: You can use multi-select by selecting items in the list whilst holding the Ctrl key.

  1. Select a function from the toolbar.
  2. Close the dialog after editing the relevant settings.

To edit chart settings

NOTE: You have enabled the Chart option.

  1. In the Type field, select a chart type.
  2. Enter a title for the chart in the Title caption or Text fields. This is displayed later for the organizational unit in the web application.

    For more detailed information on organizational units, see the One Identity Manager Web Portal User Guide.

    NOTE: The available fields that you need to edit depend on the chart type you selected in the Type menu. The properties Title caption, Text and Tooltip in this view use a SQL editor. Enter the captions for the organizational units shown in the web applications. For more information, see Multilingual captions.
  3. Configure the selected statistic with the available fields and menus.
  4. Click OK.

    Your settings are saved. The number of selected columns is displayed under Details in the field and in the Settings... view in the Value (custom) column.

To edit heatmap settings

NOTE: You have enabled the Heatmap. The dialog mask changes and divides into three parts, General, Current database, and Historical data.
NOTE: Statistics that need to be represented in heatmaps must return values for the ElementValueZ column from a query.
  • Configure the selected statistic with the available fields and menus.
    Table 40: Heatmap configurations
    Area Setting Description
    General Additional Where clause Used when loading a heatmap.
    Title

    Replaces the statistic’s display value.

    Parameters available in this expression are documented in the ChartTitleInfo class.

    Measurement parameters represented by rectangles Display name for measurement parameters represented by rectangles.
    Measurement parameters represented by colored rectangles Display name for measurement parameters represented by rectangles.
    Data Text

    Specifies the caption for rectangles.

    Parameters available in this expression are documented in the HeatmapDataPoint class.

    Tooltip

    Specifies the tooltips for rectangles.

    Parameters available in this expression are documented in the HeatmapDataPoint class.

    Limit

    Specifies the color of rectangles according to data values.

    The color spectrum goes from red to yellow to green. Red means a critical value, green an uncritical value, and yellow a neutral or average value.

    Limits can be assigned to data values directly using double values. Alternatively, maximum, and minimum values can be set for the outer colors. The corresponding data value is then dynamically assigned.

    For neutral values a value can be optionally configured.

    historical data Statistics for monthly historical data

    Used to calculate historical comparison values.

    You can select one of the statistics available in the option box to be used to calculate historical comparison values.

    Statistics for annual historical data

    Used to calculate historical comparison values.

    You can select one of the statistics available in the option box to be used to calculate historical comparison values.

    Text

    Specifies the caption for tiles.

    Parameters available in this expression are documented in the HeatmapDataPoint class.

    Tooltip

    Specifies the tooltips for tiles.

    Parameters available in this expression are documented in the HeatmapDataPoint class.

    Limit

    Specifies the color of tiles according to data values.

    The color spectrum goes from red to yellow to green. Red means a critical value, green an uncritical value, and yellow a neutral or average value.

    Limits can be assigned to data values directly using double values. Alternatively, maximum, and minimum values can be set for the outer colors. The corresponding data value is then dynamically assigned.

    For neutral values a value can be optionally configured.

Parameter type "Color value"

You can use the configuration key of the "Color value" parameter type to change all the colors used.

This chapter describes how to edit a configuration key value. Declaring a configuration key is covered in another section of this guide. For more information, see Declaring configuration keys in modules and components.

To edit a configuration key value of the "Color value" parameter type in the "Settings..." view

  1. Open the required database object in the definition tree view and select the Settings... view.
  2. In the Settings... view, select the configuration key of the parameter type "Color value" that you created previously in the Object definitions view.
  3. Enter the value - Is equivalent to standard value in the Value (custom) column, by clicking .
  4. Open the Color edit window by clicking .
  5. Select the settings from the available options and click Add colors.

    The selected colors are displayed under Custom colors.

  6. Click OK.

    In the Settings... view, the selected color value is displayed in the Value (custom) column and under Details in the field.

Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating