Starting with syslog-ng OSE version
filter <filter-id> {"<macro-or-template>" operator "<value-or-macro-or-template>"};
The following expression selects log messages containing a PID (that is, ${PID} macro is not empty):
filter f_pid {"${PID}" !=""};
The following expression selects log messages that do not contain a PID. Also, it uses a template as the left argument of the operator and compares the values as strings:
filter f_pid {"${HOST}${PID}" eq "${HOST}"};
The following example selects messages with priority level higher than 5.
filter f_level {"${LEVEL_NUM}" > "5"};
Note that:
The macro or template must be enclosed in double-quotes.
The $ character must be used before macros.
Using comparator operators can be equivalent to using filter functions, but is somewhat slower. For example, using "${HOST}" eq "myhost" is equivalent to using host("myhost" type(string)).
You can use any macro in the expression, including user-defined macros from parsers and results of pattern database classifications.
The results of filter functions are boolean values, so they cannot be compared to other values.
You can use boolean operators to combine comparison expressions.
The following operators are available:
Numerical operator | String operator | Meaning |
---|---|---|
== | eq | Equals |
!= | ne | Not equal to |
> | gt | Greater than |
< | lt | Less than |
>= | ge | Greater than or equal |
=< | le | Less than or equal |
The host(), match(), and program() filter functions accept regular expressions as parameters. The exact type of the regular expression to use can be specified with the type() option. By default, syslog-ng OSE uses PCRE regular expressions.
In regular expressions, the asterisk (*) character means 0, 1, or any number of the previous expression. For example, in the f*ilter expression the asterisk means 0 or more f letters. This expression matches for the following strings: ilter, filter, ffilter, and so on. To achieve the wildcard functionality commonly represented by the asterisk character in other applications, use .* in your expressions, for example, f.*ilter.
Alternatively, if you do not need regular expressions, only wildcards, use type(glob) in your filter:
The following filter matches on hostnames starting with the myhost string, for example, on myhost-1, myhost-2, and so on.
filter f_wildcard {host("myhost*" type(glob));};
For details on using regular expressions in syslog-ng OSE, see Using wildcards, special characters, and regular expressions in filters.
To filter for special control characters like the carriage return (CR), use the \r escape prefix in syslog-ng OSE version 3.0 and 3.1. In syslog-ng OSE 3.2 and later, you can also use the \x escape prefix and the ASCII code of the character. For example, to filter on carriage returns, use the following filter:
filter f_carriage_return {match("\x0d" value ("MESSAGE"));};
You can label the messages with custom tags. Tags are simple labels, identified by their names, which must be unique. Currently syslog-ng OSE can tag a message at two different places:
at the source when the message is received, and
when the message matches a pattern in the pattern database. For details on using the pattern database, see Using pattern databases, for details on creating tags in the pattern database, see The syslog-ng pattern database format.
Tags can be also added and deleted using rewrite rules. For details, see Adding and deleting tags.
When syslog-ng receives a message, it automatically adds the .source.<id_of_the_source_statement> tag to the message. Use the tags() option of the source to add custom tags, and the tags() option of the filters to select only specific messages.
Tagging messages and also filtering on the tags is very fast, much faster than other types of filters.
Tags are available locally, that is, if you add tags to a message on the client, these tags will not be available on the server.
To include the tags in the message, use the ${TAGS} macro in a template. Alternatively, if you are using the IETF-syslog message format, you can include the ${TAGS} macro in the .SDATA.meta part of the message. Note that the ${TAGS} macro is available only in syslog-ng OSE 3.1.1 and later.
For an example on tagging, see Example: Adding tags and filtering messages with tags.
The following functions may be used in the filter statement, as described in Filters.
Name | Description |
---|---|
facility() | Filter messages based on the sending facility. |
filter() | Call another filter function. |
host() | Filter messages based on the sending host. |
inlist() | File-based whitelisting and blacklisting. |
level() or priority() | Filter messages based on their priority. |
match() | Use a regular expression to filter messages based on a specified header or content field. |
message() | Use a regular expression to filter messages based on their content. |
netmask() or netmask6() | Filter messages based on the IP address of the sending host. |
program() | Filter messages based on the sending application. |
source() | Select messages of the specified syslog-ng OSE source statement. |
tags() | Select messages having the specified tag. |
Synopsis: | facility(<facility-name>) or facility(<facility-code>) or facility(<facility-name>..<facility-name>) |
Description: Match messages having one of the listed facility codes.
The facility() filter accepts both the name and the numerical code of the facility or the importance level. Facility codes 0-23 are predefined and can be referenced by their usual name. Facility codes above 24 are not defined.
You can use the facility filter the following ways:
Use a single facility name, for example, facility(user)
Use a single facility code, for example, facility(1)
Use a facility range (works only with facility names), for example, facility(local0..local5)
The syslog-ng application recognizes the following facilities: (Note that some of these facilities are available only on specific platforms.)
Synopsis: | filter(filtername) |
Description: Call another filter rule and evaluate its value. For example:
filter demo_filter { host("example") and match("deny" value("MESSAGE")) }; filter inverted_demo_filter { not filter(demo_filter) }
Synopsis: | host(regexp) |
Description: Match messages by using a regular expression against the hostname field of log messages. Note that you can filter only on the actual content of the HOST field of the message (or what it was rewritten to). That is, syslog-ng OSE will compare the filter expression to the content of the ${HOST} macro. This means that for the IP address of a host will not match, even if the IP address and the hostname field refers to the same host. To filter on IP addresses, use the netmask() filter.
filter demo_filter { host("example") };
Synopsis: | in-list("</path/to/file.list>", value("<field-to-filter>")) |
Description: Matches the value of the specified field to a list stored in a file, allowing you to do simple, file-based black- and whitelisting. The file must be a plain-text file, containing one entry per line. The syslog-ng OSE application loads the entire file, and compares the value of the specified field (for example, ${PROGRAM}) to entries in the file. When you use the in-list filter, note the following points:
Comparing the values is case-sensitive.
Only exact matches are supported, partial and substring matches are not.
If you modify the list file, reload the configuration of syslog-ng OSE for the changes to take effect.
Available in syslog-ng OSE
Create a text file that contains the programs (as in the ${PROGRAM} field of their log messages) you want to select. For example, you want to forward only the logs of a few applications from a host: kernel, sshd, and sudo. Create the /etc/syslog-ng/programlist.list file with the following contents:
kernel sshd sudo
The following filter selects only the messages of the listed applications:
filter f_whitelist { in-list("/etc/syslog-ng/programlist.list", value("PROGRAM")); };
Create the appropriate sources and destinations for your environment, then create a log path that uses the previous filter to select only the log messages of the applications you need:
log { source(s_all); filter(f_whitelist); destination(d_logserver); };
To create a blacklist filter, simply negate the in-list filter:
filter f_blacklist { not in-list("/etc/syslog-ng/programlist.list", value("PROGRAM")); };
Synopsis: | level(<priority-level>) or level(<priority-level>..<priority-level>) |
Description: The level() filter selects messages corresponding to a single importance level, or a level-range. To select messages of a specific level, use the name of the level as a filter parameter, for example, use the following to select warning messages:
level(warning)
To select a range of levels, include the beginning and the ending level in the filter, separated with two dots (..). For example, to select every message of error or higher level, use the following filter:
level(err..emerg)
The level() filter accepts the following levels: emerg, alert, crit, err, warning, notice, info, debug.
Synopsis: | match(regexp) | match(regexp value("MACRO")) | match(regexp template("MACROS")) |
Description: Match a regular expression to the headers and the message itself (that is, the values returned by the MSGHDR and MSG macros). Note that in syslog-ng version 2.1 and earlier, the match() filter was applied only to the text of the message, excluding the headers. This functionality has been moved to the message() filter.
To limit the scope of the match to a specific part of the message (identified with a macro), use the match(regexp value("MACRO")) syntax. Do not include the $ sign in the parameter of the value() option.
The value() parameter accepts both built-in macros and user-defined ones created with a parser or using a pattern database. For details on macros and parsers, see Templates and macros, Parsing messages with comma-separated and similar values, and Using parser results in filters and templates.
Starting with version
match("^my-regular-expression" template("${HOST}|${PROGRAM}${PID}|${MESSAGE}"));
Using a template with a single macro is equivalent with using the value() parameter. For example, the following two lines are equivalent:
match("^my-regular-expression" value("MESSAGE")); match("^my-regular-expression" template("${MESSAGE}"));
Synopsis: | message(regexp) |
Description: Match a regular expression to the text of the log message, excluding the headers (that is, the value returned by the MSG macros). Note that in syslog-ng version 2.1 and earlier, this functionality was performed by the match() filter.
Synopsis: | netmask(ipv4/mask) |
Description: Select only messages sent by a host whose IP address belongs to the specified IPv4 subnet. Note that this filter checks the IP address of the last-hop relay (the host that actually sent the message to syslog-ng OSE), not the contents of the HOST field of the message. You can use both the dot-decimal and the CIDR notation to specify the netmask. For example, 192.168.5.0/255.255.255.0 or 192.168.5.0/24. To filter IPv6 addresses, see netmask6().
Synopsis: | netmask6(ipv6/mask) |
Description: Select only messages sent by a host whose IP address belongs to the specified IPv6 subnet. Note that this filter checks the IP address of the last-hop relay (the host that actually sent the message to syslog-ng OSE), not the contents of the HOST field of the message. You can use both the regular and the compressed format to specify the IP address, for example, 1080:0:0:0:8:800:200C:417A or 1080::8:800:200C:417A. If you do not specify the address, localhost is used.
Use the netmask (also called prefix) to specify how many of the leftmost bits of the address comprise the netmask (values 1-128 are valid). For example, the following specify a 60-bit prefix: 12AB:0000:0000:CD30:0000:0000:0000:0000/60 or 12AB::CD30:0:0:0:0/60. Note that if you set an IP address and a prefix, syslog-ng OSE will ignore the bits of the address after the prefix. To filter IPv4 addresses, see netmask().
The netmask6() filter is available in syslog-ng OSE
|
Caution:
If the IP address is not syntactically correct, the filter will never match. The syslog-ng OSE application currently does not send a warning for such configuration errors. |
Synopsis: | program(regexp) |
Description: Match messages by using a regular expression against the program name field of log messages.
Synopsis: | source id |
Description: Select messages of a source statement. This filter can be used in embedded log statements if the parent statement contains multiple source groups — only messages originating from the selected source group are sent to the destination of the embedded log statement.
Synopsis: | tag |
Description: Select messages labeled with the specified tag. Every message automatically has the tag of its source in .source.<id_of_the_source_statement> format. This option is available only in syslog-ng 3.1 and later.
source s_tcp { network(ip(192.168.1.1) port(1514) tags("tcp", "router")); };
Use the tags() option of the filters to select only specific messages:
filter f_tcp { tags(".source.s_tcp"); }; filter f_router { tags("router"); };
The syslog-ng OSE application automatically adds the class of the message as a tag using the .classifier.<message-class> format. For example, messages classified as "system" receive the .classifier.system tag. Use the tags() filter function to select messages of a specific class.
filter f_tag_filter {tags(".classifier.system");};
© ALL RIGHTS RESERVED. Feedback 使用条款 隐私 Cookie Preference Center