立即与支持人员聊天
与支持团队交流

One Identity Safeguard for Privileged Sessions 7.0.4 LTS - REST API Reference Guide

Introduction Using the SPS REST API Basic settings User management and access control Managing SPS General connection settings HTTP connections Citrix ICA connections MSSQL connections RDP connections SSH connections Telnet connections VNC connections Search, download, and index sessions Reporting Health and maintenance Advanced authentication and authorization Completing the Welcome Wizard using REST Enable and configure analytics using REST

Routing between interfaces

Configures routing between network interfaces. To use an interface in single-interface router mode, configure both interface_a and interface_b elements to reference that same interface.

URL
GET https://<IP-address-of-SPS>/api/configuration/network/ip_forwarding_rule_pairs
Cookies
Cookie name Description Required Values
session_id Contains the authentication token of the user Required

The value of the session ID cookie received from the REST server in the authentication response, for example, a1f71d030e657634730b9e887cb59a5e56162860. For more information on authentication, see Authenticate to the SPS REST API.

NOTE: This session ID refers to the connection between the REST client and the SPS REST API. It is not related to the sessions that SPS records (and which also have a session ID, but in a different format).

Sample request

The following command lists interface routing rules.

curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/network/ip_forwarding_rule_pairs
Response

The following is a sample response received when listing interface routing rules.

For more information on the meta object, see Message format.

{
  "body": [
    {
      "interface_a": {
        "key": "nic1.interfaces.ff7574025754b3df1647001",
        "meta": {
          "href": "/api/configuration/network/nics/nic1/interfaces/ff7574025754b3df1647001"
        }
      },
      "interface_b": {
        "key": "nic1.interfaces.ff7574025754b3df1647001",
        "meta": {
          "href": "/api/configuration/network/nics/nic1/interfaces/ff7574025754b3df1647001"
        }
      }
    }
  ],
  "key": "ip_forwarding_rule_pairs",
  "meta": {
    "first": "/api/configuration/network/dns",
    "href": "/api/configuration/network/ip_forwarding_rule_pairs",
    "last": "/api/configuration/network/routing",
    "next": "/api/configuration/network/naming",
    "parent": "/api/configuration/network",
    "previous": "/api/configuration/network/dns",
    "transaction": "/api/transaction"
  }
}
Element Type Description
key string Top level element, contains the ID of the endpoint.
body Top level element (list) Contains the rules for routing between the network interfaces.
interface_a string

References the identifier of the network interface. You can configure network interfaces at the /api/configuration/network/nics/ endpoint.

To modify or add a network interface, use the value of the returned key as the value of the interface_a element, and remove any child elements (including the key).

interface_b string

References the identifier of the network interface. You can configure network interfaces at the /api/configuration/network/nics/ endpoint.

To modify or add a network interface, use the value of the returned key as the value of the interface_b element, and remove any child elements (including the key).

Add a rule for routing between the network interfaces

To add a rule, you have to:

  1. Open a transaction.

    For more information, see Open a transaction.

  2. Create the JSON object for the new list of rules.

    POST the JSON object to the https://<IP-address-of-SPS>/api/configuration/network/ip_forwarding_rule_pairs endpoint. You can find a detailed description of the available parameters listed in Element .

    If the POST request is successful, the response includes the key of the new rule.

  3. Commit your changes.

    For more information, see Commit a transaction.

Modify a rule for routing between the network interfaces

To modify a rule, you have to:

  1. Open a transaction.

    For more information, see Open a transaction.

  2. Modify the JSON object of the list of rules.

    PUT the modified JSON object to the https://<IP-address-of-SPS>/api/configuration/network/ip_forwarding_rule_pairs endpoint. You can find a detailed description of the available parameters listed in Element .

  3. Commit your changes.

    For more information, see Commit a transaction.

Status and error codes

The following table lists the typical status and error codes for this request. For a complete list of error codes, see Application level error codes.

Code Description Notes
201 Created The new resource was successfully created.
401 Unauthenticated The requested resource cannot be retrieved because the client is not authenticated and the resource requires authorization to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
403 Unauthorized The requested resource cannot be retrieved because the client is not authorized to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
404 NotFound The requested object does not exist.

Naming options

Contains the settings for the DNS search domain, hostname, and appliance nickname.

URL
GET https://<IP-address-of-SPS>/api/configuration/network/naming
Cookies
Cookie name Description Required Values
session_id Contains the authentication token of the user Required

The value of the session ID cookie received from the REST server in the authentication response, for example, a1f71d030e657634730b9e887cb59a5e56162860. For more information on authentication, see Authenticate to the SPS REST API.

NOTE: This session ID refers to the connection between the REST client and the SPS REST API. It is not related to the sessions that SPS records (and which also have a session ID, but in a different format).

Sample request

The following command lists the naming settings.

curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/network/naming
Response

The following is a sample response received when listing naming settings.

For more information on the meta object, see Message format.

{
  "body": {
    "domainname": "example",
    "hostname": "api-docs",
    "nickname": null
  },
  "key": "naming",
  "meta": {
    "first": "/api/configuration/network/dns",
    "href": "/api/configuration/network/naming",
    "last": "/api/configuration/network/routing",
    "next": "/api/configuration/network/nics",
    "parent": "/api/configuration/network",
    "previous": "/api/configuration/network/ip_forwarding_rule_pairs",
    "transaction": "/api/transaction"
  }
}
Element Type Description
key string Top level element, contains the ID of the endpoint.
body Top level element (string) Contains the naming settings.
domainname string The domain name of the network.
hostname string The hostname of SPS.
nickname string The nickname for the appliance. Use this name to distinguish between multiple SPS appliances on the network. This name is visible in the boot and core login shells.
Modify a name

To modify a name, you have to:

  1. Open a transaction.

    For more information, see Open a transaction.

  2. Modify the JSON object of the endpoint.

    PUT the modified JSON object to the https://<IP-address-of-SPS>/api/configuration/network/naming endpoint. You can find a detailed description of the available parameters listed in Element .

  3. Commit your changes.

    For more information, see Commit a transaction.

Status and error codes

The following table lists the typical status and error codes for this request. For a complete list of error codes, see Application level error codes.

Code Description Notes
201 Created The new resource was successfully created.
401 Unauthenticated The requested resource cannot be retrieved because the client is not authenticated and the resource requires authorization to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
403 Unauthorized The requested resource cannot be retrieved because the client is not authorized to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
404 NotFound The requested object does not exist.

Network addresses

Contains the network addresses configured for each physical NIC.

URL
GET https://<IP-address-of-SPS>/api/configuration/network/nics
Cookies
Cookie name Description Required Values
session_id Contains the authentication token of the user Required

The value of the session ID cookie received from the REST server in the authentication response, for example, a1f71d030e657634730b9e887cb59a5e56162860. For more information on authentication, see Authenticate to the SPS REST API.

NOTE: This session ID refers to the connection between the REST client and the SPS REST API. It is not related to the sessions that SPS records (and which also have a session ID, but in a different format).

Sample request

The following command lists the endpoints for the physical network interfaces.

curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/network/nics/

The following commands retrieve the properties of a specific physical network interface.

curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/network/nics/nic1
curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/network/nics/nic2
curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/network/nics/nic3
Response

The following is a sample response received when listing physical network interfaces.

For more information on the meta object, see Message format.

{
  "items": [
    {
      "key": "nic1",
      "meta": {
        "href": "/api/configuration/network/nics/nic1"
      }
    },
    {
      "key": "nic2",
      "meta": {
        "href": "/api/configuration/network/nics/nic2"
      }
    },
    {
      "key": "nic3",
      "meta": {
        "href": "/api/configuration/network/nics/nic3"
      }
    }
  ],
  "meta": {
    "first": "/api/configuration/network/dns",
    "href": "/api/configuration/network/nics",
    "last": "/api/configuration/network/routing",
    "next": "/api/configuration/network/routing",
    "parent": "/api/configuration/network",
    "previous": "/api/configuration/network/naming",
    "transaction": "/api/transaction"
  }
}

When retrieving the endpoint of a specific physical network interface, the response is the following.

{
  "body": {
      "interfaces": {
          "@order": ["ff7574025754b3df1647001"],
          "ff7574025754b3df1647001": {
              "addresses": {
                  "1": "198.51.100.123/24",
                  "6001481625b7c21ef97598": "2001:db8:1234::5678/48",
                  "@order": ["1", "6001481625b7c21ef97598"]
              },
              "mtu": 1500,
              "name": "external",
              "source_based_routes": [
                  {
                      "gateway": "198.51.100.1",
                      "target_network": "203.0.113.0/24"
                  },
                  {
                      "gateway": "2001:db8:1234::1",
                      "target_network": "2001:db8:aaaa::/48"
                  }
              ],
              "vlantag": 0
          }
      },
      "name": "eth0",
      "speed": "auto"
  },
  "key": "nic1",
  "meta": {
      "first": "/api/configuration/network/nics/nic1",
      "href": "/api/configuration/network/nics/nic1",
      "last": "/api/configuration/network/nics/nic3",
      "next": "/api/configuration/network/nics/nic2",
      "parent": "/api/configuration/network/nics",
      "previous": null,
      "remaining_seconds": 10800,
      "transaction": "/api/transaction"
  }
}
Element Type Description
key string Top level element, contains the ID of the physical network interface (nic1, nic2 or nic3).
body Top level element (string) Contains the properties of the physical network interface.
interfaces Top level item Contains the configuration of all virtual interfaces on the physical NIC.
name string The system name of the physical network interface (eth0, eth1 or eth2). Do not change this value.
speed string

The speed of the physical network interface. The default value is auto. Change this setting only for troubleshooting purposes. Possible values are:

  • auto

    Negotiate the network speed automatically. This is the default value.

  • 10-half

    10BaseT/Half.

  • 100-half

    100BaseT/Half.

  • 10-full

    10BaseT/Full.

  • 100-full

    100BaseT/Full.

  • 1000-full

    1000BaseT/Full.

Elements of interfaces Type Description
@order list

Lists the keys of the interfaces in the order they are be displayed on the SPS web UI.

<key-of-an-interface> string

Contains the addresses, name, and vlantag of the network interface.

Each physical NIC has an automatically created interface key, where the value of the vlanid element is set to 0.

To add a valid virtual network interface to the physical NIC, create an additional interface, and assign a value between 1 and 4094 to its vlanid element.

addresses string Contains the addresses of the interface, and their display order.
<key-of-address> string Contains the IP address range.
@order list Lists the keys of the addresses in the order they are displayed on the SPS web UI.

 

mtu

 

integer

Maximum Transmission Unit (MTU) to set per network interface (VLAN or network interface card). Default value: 1500

name string The name of the interface, as displayed on the SPS web UI.

 

source_based_routes

 

list

Contains details of the network routing rule specific to packets coming out of this particular interface.

vlantag string

The ID of the interface.

For the physical interface, the value is 0. For virtual interfaces, the value is between 1 and 4094.

Caution:

Do not set the VLAN ID unless your network environment is already configured to use this VLAN. Otherwise, your SPS appliance will be unavailable using this interface.

Elements of source_based_routes Type Description
gateway string The IPv4 or IPv6 address of the gateway used to access the network set in this routing rule.
target_network string The IPv4 or IPv6 address of the host or network accessible via this routing rule.
Status and error codes

The following table lists the typical status and error codes for this request. For a complete list of error codes, see Application level error codes.

Code Description Notes
401 Unauthenticated The requested resource cannot be retrieved because the client is not authenticated and the resource requires authorization to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
403 Unauthorized The requested resource cannot be retrieved because the client is not authorized to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
404 NotFound The requested object does not exist.

Routing table

Contains the address of the gateway server for each configured subnet.

URL
GET https://<IP-address-of-SPS>/api/configuration/network/routing
Cookies
Cookie name Description Required Values
session_id Contains the authentication token of the user Required

The value of the session ID cookie received from the REST server in the authentication response, for example, a1f71d030e657634730b9e887cb59a5e56162860. For more information on authentication, see Authenticate to the SPS REST API.

NOTE: This session ID refers to the connection between the REST client and the SPS REST API. It is not related to the sessions that SPS records (and which also have a session ID, but in a different format).

Sample request

The following command lists the configured subnets and the corresponding gateway servers.

curl --cookie cookies https://<IP-address-of-SPS>/api/configuration/network/routing
Response

The following is a sample response received when viewing the routing table.

For more information on the meta object, see Message format.

{
  "body": [
    {
      "gateway": "192.168.56.1",
      "target_network": "0.0.0.0/0"
    }
  ],
  "key": "routing",
  "meta": {
    "first": "/api/configuration/network/dns",
    "href": "/api/configuration/network/routing",
    "last": "/api/configuration/network/routing",
    "next": null,
    "parent": "/api/configuration/network",
    "previous": "/api/configuration/network/nics",
    "transaction": "/api/transaction"
  }
}
Element Type Description
key string Top level element, contains the ID of the endpoint.
body Top level element (list) Contains the routing table.
gateway string The IP address of the gateway server.
target_network string The network id (IP address and subnet mask) of the subnet.
Add a subnet

To add a subnet, you have to:

  1. Open a transaction.

    For more information, see Open a transaction.

  2. Create the JSON object for the new routing table.

    POST the JSON object to the https://<IP-address-of-SPS>/api/configuration/network/routing endpoint. You can find a detailed description of the available parameters listed in Element .

  3. Commit your changes.

    For more information, see Commit a transaction.

Modify the routing table

To modify the routing table, you have to:

  1. Open a transaction.

    For more information, see Open a transaction.

  2. Modify the JSON object of the routing table.

    PUT the modified JSON object to the https://<IP-address-of-SPS>/api/configuration/netowrk/routing endpoint. You can find a detailed description of the available parameters listed in Element .

  3. Commit your changes.

    For more information, see Commit a transaction.

Status and error codes

The following table lists the typical status and error codes for this request. For a complete list of error codes, see Application level error codes.

Code Description Notes
201 Created The new resource was successfully created.
401 Unauthenticated The requested resource cannot be retrieved because the client is not authenticated and the resource requires authorization to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
403 Unauthorized The requested resource cannot be retrieved because the client is not authorized to access it. The details section contains the path that was attempted to be accessed, but could not be retrieved.
404 NotFound The requested object does not exist.
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级