Identity Manager 9.2 - Target System Synchronization Reference Guide

The global definitions contain the information required for logging in to the One Identity Closed Manager database where the changes are to be made. If the connection to the target system is supposed to be established over a remote connection, the address data of the remote connection server is also stored here.

Table 84: Global definitions
Elements	Description
WorkDatabase.ConnectionString	Database server connection parameter. Modify these settings or define a parameter if adding new synchronization projects to a different database.
WorkDatabase.AuthenticationString	Login data for the One Identity Manager database. Modify these settings or define a parameter if adding new synchronization projects to a different database.
WorkDatabase.DatabaseFactory	Supported database system. Only SQL Server is supported at present (VI.DB.ViSqlFactory, VI.DB).
LoadedShell.Uid	Unique ID of the synchronization project to be loaded. Only required when making changes to existing synchronization projects.
Remoting.Address	Address of the remote connection server.
Remoting.Port	Port of the remote connection server.

Defining the editor for new synchronization projects

To create new synchronization projects Closed ,use the ShellWizard editor. The definition part of this editor contains the following information:

Table 85: ShellWizard editor definitions
Elements	Description
TemplateUid	Unique project template ID to be used. This element does not exist if the reference project was created without a project template.
ConnectedSystemIdentity	Schema information, such as type, version, and schema ID of the connected system.
ScriptLanguage	Script language used in the synchronization project.
ShellDisplay	Synchronization project display name.
ShellDescription	Description of the synchronization project.
AutoCompletion	Specifies whether the synchronization project is activated immediately.
MainConnection	The connection data for the One Identity Manager database to be synchronized in this synchronization project.
ConnectedSystemConnection	Connection data for the target system to be synchronized with this synchronization project.
TemplateConfiguration	Additional settings that were made in the project wizard. For example: Provisioning data Enabled revision filter Setting for the synchronization log Selected synchronization server This element does not exist if the reference project was created without a project template.

Defining the editor for existing synchronization projects

Table 86: ShellPatchEditor editor definitions
Elements	Description
PatchesToApply	Comma-separated list of patch numbers for all patches that are to be applied. Only patches that do not require any user input can be applied. Keywords can be specified in order to apply all available patches. AllFixes: Applies all patches to resoled issues. AllFeatures: Applies all patches to new and changed features. Example: <Data Name="PatchesToApply" Display="Patches to apply" Type="System.String, mscorlib">AllFixes,AllFeatures</Data> All dependent milestones will also be applied.

Table 86: ShellPatchEditor editor definitions

Elements

Description

PatchesToApply

Comma-separated list of patch numbers for all patches that are to be applied.

Only patches that do not require any user input can be applied.

Keywords can be specified in order to apply all available patches.

AllFixes: Applies all patches to resoled issues.
AllFeatures: Applies all patches to new and changed features.

Example: <Data Name="PatchesToApply" Display="Patches to apply" Type="System.String, mscorlib">AllFixes,AllFeatures</Data>

All dependent milestones will also be applied.

Synchronization Editor Command Line Interface

Once you have created a configuration file and have customized Closed it accordingly, you can generate new synchronization projects Closed or update existing synchronization projects with the Synchronization Editor Command Line Interface Closed . You can also opt to use the Synchronization Editor Module for Windows PowerShell Closed to do this. For more information, see Synchronization Editor Module for Windows PowerShell.

To create synchronization projects with the Synchronization Editor Command Line Interface

Start a command line editor.
Switch to the One Identity Manager installation directory.
Run the Synchronization Editor Command Line Interface with the -V option and set the parameter values.

SynchronizationEditor.CLI.exe --CreateShell {<Options>} <configuration file> {<Parameter>}

NOTE: If the value of a parameter contains a space or special character, it must be enclosed in quotes.

Example: SynchronizationEditor.CLI.exe --CreateShell -V /Workspace=D:\ActiveDirectoryProject.sews /SetParam SyncProject="Synchronization project for Active Directory domain XYZ"
Enter values for the parameters requiring user input.
- To enter an empty value, press ENTER.
- To transfer the default value defined in the configuration file, click Esc.
(Optional) Run the Synchronization Editor Command Line Interface with the option -R.

This establishes a remote connection.

Example: SynchronizationEditor.CLI.exe --CreateShell -R /Workspace=D:\ActiveDirectoryProject.sews
If no error occur, run steps 3 and 4 with the -S option.

If the synchronization project was created with a project template, the schemas are shrunk when saved.

To update synchronization projects with the Synchronization Editor Command Line Interface

Start a command line editor.
Switch to the One Identity Manager installation directory.
Run the Synchronization Editor Command Line Interface with the -V option and set the parameter values.

SynchronizationEditor.CLI.exe --PatchShell {<options>} <configuration file> {<parameter>}

NOTE: If the value of a parameter contains a space or special character, it must be enclosed in quotes.

Example: SynchronizationEditor.CLI.exe --PatchShell -V /Workspace=D:\ActiveDirectoryProject.sews /SetParam SyncProject="CCC-99D111DD1CF11111BCF11111E1111BE9" /SetParam Patches=AllFixes,Milestone_OneIM_8.0.2017.1104,VPR#12345,VPR#23456,VPR#34567
- If the target system is accessed when the patch is applied and the connection parameters in the default variable set contain encrypted values, you will be prompted to enter the decrypted values. The names of the required parameters are displayed.
  
  TIP: Use these parameter names to add a parameter in the configuration file for each encrypted connection parameter. This allows values for the encrypted connection parameters to be passed to the Synchronization Editor Command Line Interface when it is called.
  
  The parameter names must conform to the following naming convention: Decryption_DefaultVariableSet_<variable name>.
  
  Example of a parameter definition: <Parameter Name="Decryption_DefaultVariableSet_Password" Display="Password of target system user" IsQueryParameter="False"</Parameter>
  
  Example of a command line call: SynchronizationEditor.CLI.exe --PatchShell -V /Workspace=D:\ActiveDirectoryProject.sews /SetParam SyncProject="CCC-99D111DD1CF11111BCF11111E1111BE9" /SetParam Patches=AllFixes /SetParam Decryption_DefaultVariableSet_Password="A123-z987"
Enter values for the parameters requiring user input.
- To enter an empty value, press ENTER.
- To transfer the default value defined in the configuration file, click Esc.
(Optional) Run the Synchronization Editor Command Line Interface with the option -R.

This establishes a remote connection.

Example: SynchronizationEditor.CLI.exe --PatchShell -R /Workspace=D:\ActiveDirectoryProject.sews
If no error occur, run steps 3 and 4 with the -S option.

If the synchronization project was created with a project template, the schemas are shrunk when saved.

TIP: Run the SynchronizationEditor.CLI.exe without additional input to view help for the Synchronization Editor Command Line Interface.

Table 87: Synchronization Editor Command Line Interface commands
Command	Description
--CreateShell	Creates a new synchronization project using the data from the defined workspace. Short form: --CS
--PatchShell	Applies patches to an existing synchronization project. Short form: --PS

Table 88: Synchronization Editor Command Line Interface options
Option	Description
-?\|H	Displays help.
-Q	No alert before running irreversible actions.
-V	The Synchronization Editor Command Line Interface is run in verbose mode. Use this option for debugging.
-S	Saves the new synchronization project in the database. If this option is not given, creating the synchronization project is simulated.
-N	Defines whether the Synchronization Editor Command Line Interface opens in non-interactive mode. This may cause requests for parameter input to fail. Missing encrypted values are also queried in non-interactive mode.
-R	Establishes the connection to the target system over a remote service connection. Use a remote connection if it is not possible to directly access the target system from the workstation where the Synchronization Editor is installed.

Table 89: Parameter declaration
Parameters	Description
/Workspace	Full or relative path of the configuration file.
/SetParam	Sets the value of the parameter defined in the configuration file. Overwrites default values. Format: Parameter name=value Pay attention to the upper and lower case characters in the parameter name. If a value contains a space or special character, it must be enclosed in quotes. Multiple parameters are declared individually: /SetParam ParamName1=Value1 /SetParam ParamName2=Value2

请选择您的产品：

为向您提供更好的服务，请填写'Purpose of your Chat'（联系目的）：

针对您的问题建议的解决方案

Identity Manager 9.2 - Target System Synchronization Reference Guide

Global definitions

Defining the editor for new synchronization projects

Defining the editor for existing synchronization projects

Synchronization Editor Command Line Interface