立即与支持人员聊天
与支持团队交流

Identity Manager 9.2 - Process Monitoring and Troubleshooting Guide

About this guide Monitoring handling of processes Support for error localization in One Identity Manager Configuring logs in One Identity Manager Application-specific configuration files

Details of a process step's parameters

After selecting a process step, the passing parameters of the process step are displayed with their names and their values. If the selected node does not represent a process step, the parameter view is cleared.

To display process step parameters

  • In the Job Queue Info, select a process step and select the View > Parameter menu.

    This shows all the parameters of the selected process step.

    TIP: In the parameter view, you can copy the data selected parameter and its value into the clipboard using Ctrl + C. The data format is column name value.

Parameters that contain an object key are displayed as a link in the parameter view.

  • You can display the objects by clicking on the link or using the Show object properties context menu.

  • Use the Open in Object Browser context menu item to start the Object Browser and display the object.

  • For object keys that refer to a synchronization project, use the Open in Synchronization Editor context menu item to start the Synchronization Editor and load the synchronization project.

To support provisioning analysis, the CausingEntityPatch parameter is shown as a link. This parameter contains the patch that contains the changes to be provisioned.

  • Double-click on the link to open a separate dialog with the change information. You can also reach the dialog over the Show patch item of the parameter's context menu.

    The change information lists the properties of the object before the change (old value) and after the change (new value). Changed properties are highlighted in color.

Error messages (ErrorMessages parameter) are displayed as links. Clicking on the link displays a detailed message.

OUT parameters

Parameters of the OUT or INOUT type are parameters that a process component can use to output a value. This value is then available in all subsequent process steps in the process and can be used as a value for parameters of the IN type.

The Job Queue Info program is not technically capable of determining the point at which or for which process step these parameters are valid. For this reason, OUT parameters are added to the list of parameters of a process step and are highlighted in blue.

They cannot be seen in the view of the process step under <ParamIN> of a process step because this view presents the data structure of every process step at compilation time. However, the OUT parameters are created in the context of the process.

The time at which the process is loaded into the Job Queue Info is important. If a parameter is overwritten several times, only the state at the time of data query is displayed.

Example:

Step 1

OUT parameter: X=1

Step 2

IN parameter: X=1

Value changes: X=2

OUT parameter: X=2

Step 3

IN parameter: X=2

If the process is loaded into the Job Queue Info before step 2 is processed, the Job Queue Info displays the X=1 value for the OUT parameter. If the process is loaded after step 2 is processed, the X=2 value is displayed for the OUT parameter.

For more information about each process step and how the parameters are filled, see the One Identity Manager Service log file.

Related topics

Show hidden parameters

Parameters in the One Identity Manager Service log file and in the Job Queue Info program that are not to be displayed are labeled with the Hidden option. Values for hidden parameters are shown as <HIDDEN>.

The following users can view hidden parameters in Job Queue Info:

  • Administrative users

  • Users with the JobQueue_ShowHiddenParameters program function

Related topics

Re-enabling process steps and processes

The maximum number of times a process can appear in the Job queue can be limited in order to prevent mass modifications. If the limit is exceeded, the process steps are set to Overlimit status and are therefore no longer retrieved for processing. You can enable these process steps be run again.

Critical process steps that have failed to be processed are given Frozen status. You can also re-enable these processes after correcting the error.

NOTE: The error message is displayed as a tooltip on the affected process step. You use the Show error message context menu item to show a detailed error message.

To re-enable a process step

  • Select the process step in the Job Queue Info and select the Re-enable process step context menu item.

    NOTE: Use Shift + select or Ctrl + select to select and re-enable multiple process steps.

To re-enable a process

  • Select the process in the Job Queue Info and select the Restart process context menu item.

    IMPORTANT: When you restart a process, all process steps are processed again. All previously handled processes up to the point at which the error occurred are run again. This can lead to data inconsistencies in certain circumstances.

Sometimes a rerun of the failed process step is not desired. This might occur when the action to be carried out by the process has been carried out manually, for example, an expected directory has been manually added in the meantime. Even so, it may just happen that the process should be rerun even though the error has not been fixed, for example, for a rollback of already processed steps. In this case, to continue with the process, the next process step in the success or failure branch can be handled.

To run the subsequent process step

  • Select the failed process step and select the End with success or the End with error context menu item.

    NOTE:

    • The context menu items are only available if the current user owns the JobQueue_Frozen program function.

    • The entries are only displayed in the context menu if there is an error successor/sucess successor and the process step hast the status Frozen.

    • Use Shift+ select or Ctrl + select to select multiple process steps and start further processing.

相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级