Chatee ahora con Soporte
Chat con el soporte

One Identity Safeguard for Privileged Passwords 7.0.5 LTS - Administration Guide

Introduction System requirements and versions Using API and PowerShell tools Using the virtual appliance and web management console Cloud deployment considerations Setting up Safeguard for Privileged Passwords for the first time Using the web client Home Privileged access requests Appliance Management
Appliance Backup and Retention Certificates Cluster Enable or Disable Services External Integration Real-Time Reports Safeguard Access Appliance Management Settings
Asset Management
Account Automation Accounts Assets Partitions Discovery Profiles Tags Registered Connectors Custom platforms
Security Policy Management
Access Request Activity Account Groups Application to Application Cloud Assistant Asset Groups Entitlements Linked Accounts User Groups Security Policy Settings
User Management Reports Disaster recovery and clusters Administrator permissions Preparing systems for management Troubleshooting Frequently asked questions Appendix A: Safeguard ports Appendix B: SPP and SPS join guidance Appendix C: Regular Expressions About us

Managing assets

Use the controls and tabbed pages on the Assets page to perform the following tasks to manage Safeguard for Privileged Passwords assets:

Adding an asset

It is the responsibility of the Asset Administrator to add assets and accounts to Safeguard for Privileged Passwords.

Safeguard for Privileged Passwords allows you to set up Asset Discovery jobs that run automatically. For more information, see Asset Discovery job workflow.

Before you add systems to Safeguard for Privileged Passwords, make sure they are properly configured. For more information, see Preparing systems for management.

NOTE: There are special considerations for adding an MS SQL asset to Safeguard. See KB 261806 for details.

To add an asset

  1. Navigate to Asset Management > Assets.
  2. Click New Asset from the toolbar.
  3. In the dialog, provide information in each of the tabs:

    General tab (add asset)

    Where you add general information about the asset.

    Connection tab (add asset) Where you add the network address, operating system, and version information.
    Management tab (add asset)

    Where you add the partition, profile information, and enable session requests.

    Account Discovery tab (add asset)

    Where you add the Account Discovery job.

Related Topics

Adding an account to an asset

Assigning an asset to a partition

Assigning a profile to an asset

Assigning assets or accounts to a password profile and SSH key profile

General tab (add asset)

Use the General tab to specify general information about the asset.

Table 100: Asset: General properties
Property Description
Name

(Required) Enter a unique display name for the asset.

Limit: 100 characters

Description

(Optional) Enter information about this managed system.

Limit: 255 characters

Connection tab (add asset)

On the Connection tab, select a platform, an Authentication Type, and specify the account credentials. If the asset has a custom platform, the Custom Properties elements are displayed (for more information, see Custom platforms). When you create a directory asset, accounts created display as discovered accounts in the Discovered Accounts properties grid. For more information, see Discovered Accounts.

The settings for an asset are shown below.

Table 101: Asset: Connection properties
Property Description
Platform

Select an operating system or directory service, for this asset.

A custom platform can be selected. For more information, see Custom platforms.

Generic operating system selections:

Safeguard for Privileged Passwords allows you to select a generic operating system of Other, Other Managed, Other Directory, or Linux. This allows you to add an asset to Safeguard for Privileged Passwords without designating a specific platform.

  • Other: An asset with an Other operating system cannot be managed. You can manually change passwords on accounts associated with an asset with an Other operating system. Safeguard for Privileged Passwords cannot connect to the asset so there is no automatic password or SSH key check and change, test connection, or other activity requiring a connection.
  • Other Managed: Safeguard for Privileged Passwords stores the password or SSH key and can automatically check and change it per the profile configuration. There is no active connection or service account. The passwords are rotated internally and event notifications are sent when the rotation is complete. Another component or piece of automation can change the password or SSH key or make use of the password or SSH key in configuration files. For example, a listener can pick up the change event via the Safeguard for Privileged Passwords Application to Application (A2A) service and perform actions, as required.
  • Other Directory: Other Directory supports the addition of directory properties at the asset and account levels. This allows for the accounts stored on them to be used in session policy via linked accounts or directory account using the access configuration settings. Since an Other Directory is not actually connected to a directory, it is unable to discover accounts or assets that belong to the actual directory that the Other Directory represents. Therefore, all accounts, assets, and credentials will have to be manually entered in Safeguard for Privileged Passwords.

    CAUTION: Since an Other Directory is not actually connected to a directory, you are responsible for making sure that the Other Directory assets and accounts stay in sync with the actual directory that the Other Directory represents.

    For example, if you change the password in Safeguard for Privileged Passwords the password will not be set in the actual directory. This will cause the account in Safeguard for Privileged Passwords to be out of sync with the account in the actual directory. Until manually corrected, you will be unable to use the password.

    IMPORTANT: Other Directory requires a one to one relationship between the directory and the domain. If your license is per system, this may result in a large number of licenses being required to fully support your assets.

  • Linux: Safeguard for Privileged Passwords manages an asset with "Linux" on a best effort basis.

Other platform details: Any Other platform type can be changed to a different platform type. Conversely, any platform type can be changed to Other; however, any property values specific to the current platform type will be lost. For example, you may want to change a Linux operating system to any type of Linux, such as AIX, HP-UX, or Solaris. Then, the specific platform type can be changed back to Other, if needed.

Version

(Optional) Select the operating system version. When adding a Linux or Macintosh OS X system, Safeguard for Privileged Passwords allows you to choose an Other version. Custom platforms do not allow for a version to be selected.

Safeguard for Privileged Passwords does not manage passwords for accounts on domain controllers. Manage accounts on domain controllers through the directory asset that hosts the domain controller. For more information, see Adding an account to an asset.

Architecture

(Optional) The product's system architecture. Custom platforms do not allow for an architecture to be set.

Network Address

If applicable, enter a network DNS name or the IP address used to connect to the managed system over the network.

For Amazon Web Services assets, enter the Amazon AWS Account ID or Alias.

Authentication Type

Select the authentication method to use for the asset.

Domain Name (directory)

The domain for the asset (Name on the General tab). A domain can be identified for more than one directory asset so that multiple directory assets can be governed the same domain.

NetBios Name (Other Directory only)

The NetBios name of the asset.

Domain Unique Id (Other Directory only)

The unique domain identifier for the asset.

Naming Context (Other Directory only)

The naming context for the asset.

Manage Forest (Only available for some types of directory accounts)

Select if you want to manage the whole forest. Do not select if you want to manage just one domain.

Domain Controllers

(Only available for some types of directory accounts)

This value is set for a directory (such as Active Directory). To manage tasks and services on a Windows Domain Controller, you need to add a Windows Asset for the Domain Controller.

For Active Directory, instead of having Safeguard for Privileged Passwords automatically find domain controllers from a DNS and CLDAP ping, you can specify domain controllers.

RDP Session Port

If applicable, specify the access port on the target server to be used for RDP session requests.

Default: Port 3389

SSH Session Port

If applicable, specify the access port on the target server to be used for SSH session requests.

Default: Port 22

Telnet Session Port

If connecting to TN3270 or TN5250, the port for connection. By default, a telnet server typically listens on port 23.

Sync additions every [number] minutes

(directory)

Sync additions (incremental sync) syncs all changes except deletions. This is the faster type of sync.

For directory assets, enter or select how often you want to synchronize additions (in minutes). This updates Safeguard for Privileged Passwords with any additions or modifications that have been made to the objects, including group membership and user account attributes mapped to Safeguard for Privileged Passwords.

The default is 15 minutes and the range is between 1 and 2147483647 minutes.

Directory Sync is enabled by default and can be disabled. For more information, see Enable or Disable Services.

Sync deletions every [number] minutes

(directory)

Sync deletions (full sync) syncs all changes and deletions. This sync takes longer (perhaps hours), especially the first time it is run based on your directory setup.

For directory assets, enter or select how often you want Safeguard for Privileged Passwords to synchronize deletions (in minutes).

This updates Safeguard for Privileged Passwords with any additions, changes, and deletions that have been made to the objects, including group membership and user account attributes mapped to Safeguard for Privileged Passwords.

The default is 15 minutes and the range is between 1 and 1440 minutes.

Directory Sync is enabled by default and can be disabled. For more information, see Enable or Disable Services.

You can run the deletion (full) sync on demand using the API Assets/Synchronize and IdentityProviders/Synchronize.

Table 102: Connection tab: Asset authentication types
Authentication Type Description
SSH Key To authenticate to the asset using an SSH authentication key.
Directory Account

To authenticate to the asset using a directory account from an external identity store such as Microsoft Active Directory.

NOTE: In order to use this authentication type, you must first add a directory asset and add domain user accounts. For more information, see Accounts.

Starling Connect

To authenticate to the asset using a connector configured in Starling Connect.

NOTE: In order to use this authentication type, you must first register a Starling Connect connector. For more information, see Registered Connectors.

Local System Account

For SQL Server assets, to authenticate to the asset using a local system account, which is a Windows user account on the server that is hosting the SQL database.

Password (local service account)

To authenticate to the asset using a local service account and password.

Account Password

When the function account credentials are not in the custom script, for example, Amazon Web Services. For more information, see Adding a cloud platform account.

Access Key

For Amazon Web Services assets, to authenticate to the asset using an access key. For more information, see Adding a cloud platform account.

Custom

No authentication information is taken because the custom parameters or parameters in a customer platform script are used. No accounts associated with the asset are stored. For more information, see Custom platforms.

None

No authentication information is taken and check/change functions are disabled. No accounts associated with the asset are stored.

Safeguard for Privileged Passwords discovers the SSH host key of discovered assets even if you selected None as the service account credential type.

Test Connection

Verify that Safeguard can log in to the asset using the service account credentials that you have provided.

Timeout

Enter how long to wait (in seconds) for both the connect and command timeout.

Client ID: For SAP assets, enter the client ID.

Custom Properties

If the Platform field on the Connection tab identified a custom platform, complete the dialog based on the custom properties of the custom platform script. Safeguard for Privileged Passwords checks to ensure the values match the type of the property that include a string, boolean, integer, or password (which is called secret in the API scripts). Safeguard for Privileged Passwords cannot check the validity or system impact of values entered for custom platforms.For more information, see Creating a custom platform script.

Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación