Chatee ahora con Soporte
Chat con el soporte

Identity Manager 9.1 - Administration Guide for Connecting to SAP R/3

Managing SAP R/3 environments Setting up SAP R/3 synchronization Basic data for managing an SAP R/3 environment Basic data for user account administration SAP systems SAP clients SAP user accounts SAP groups, SAP roles, and SAP profiles SAP products Providing system measurement data Reports about SAP objects Removing a Central User Administration Troubleshooting an SAP R/3 connection Configuration parameters for managing an SAP R/3 environment Default project templates for synchronizing an SAP R/3 environment Referenced SAP R/3 table and BAPI calls Example of a schema extension file

Deleting an account definition

You can delete account definitions if they are not assigned to target systems, employees, hierarchical roles or any other account definitions.

To delete an account definition

  1. Remove automatic assignments of the account definition from all employees.

    1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

    2. Select an account definition in the result list.

    3. Select the Change main data task.

    4. Select the Disable automatic assignment to employees task.

    5. Confirm the security prompt with Yes.

    6. Save the changes.

  2. Remove direct assignments of the account definition to employees.

    1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

    2. Select an account definition in the result list.

    3. Select the Assign to employees task.

    4. In the Remove assignments pane, remove employees.

    5. Save the changes.

  3. Remove the account definition's assignments to departments, cost centers, and locations.

    1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

    2. Select an account definition in the result list.

    3. Select the Assign organizations task.

    4. In the Remove assignments pane, remove the relevant departments, cost centers, and locations.

    5. Save the changes.

  4. Remove the account definition's assignments to business roles.

    1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

    2. Select an account definition in the result list.

    3. Select the Assign business roles task.

    4. In the Remove assignments pane, remove the business roles.

    5. Save the changes.

  5. If the account definition was requested through the IT Shop, it must be canceled and removed from all IT Shop shelves.

    For more detailed information about unsubscribing requests, see the One Identity Manager Web Designer Web Portal User Guide.

    To remove an account definition from all IT Shop shelves (role-based login)

    1. In the Manager, select the Entitlements > Account definitions category.

    2. Select an account definition in the result list.

    3. Select the Remove from all shelves (IT Shop) task.

    4. Confirm the security prompt with Yes.
    5. Click OK.

      The account definition is removed from all shelves by the One Identity Manager Service. At the same time, any requests and assignment requests with this account definition are canceled.

    To remove an account definition from all IT Shop shelves (non role-based login)

    1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

    2. Select an account definition in the result list.

    3. Select the Remove from all shelves (IT Shop) task.

    4. Confirm the security prompt with Yes.
    5. Click OK.

      The account definition is removed from all shelves by the One Identity Manager Service. At the same time, any requests and assignment requests with this account definition are canceled.

  6. Remove the required account definition assignment. As long as the account definition is required for another account definition, it cannot be deleted. Check all the account definitions.

    1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

    2. Select an account definition in the result list.

    3. Select the Change main data task.

    4. From the Required account definition menu, remove the account definition.

    5. Save the changes.

  7. Remove the account definition's assignments to target systems.

    1. In the Manager, select the client in the SAP R/3 > Clients category.

    2. Select the Change main data task.
    3. On the General tab, remove the assigned account definitions.

    4. Save the changes.

  8. Delete the account definition.

    1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

    2. Select an account definition in the result list.

    3. Click to delete an account definition.

Editing a server

In order to handle target system specific processes in One Identity Manager, the synchronization server and its server functionality must be declared. You have several options for defining a server's functionality:

  • In the Designer, create an entry for the Job server in the Base Data > Installation > Job server category. For more information about this, see the One Identity Manager Configuration Guide.

  • Select an entry for the Job server in Manager > Basic configuration data > Server in SAP R/3 and edit the Job server main data.

    Use this task if the Job server has already been declared in One Identity Manager and you want to configure special functions for the Job server.

NOTE: One Identity Manager must be installed, configured, and started in order for a server to perform its function in the One Identity Manager Service network. Proceed as described in the One Identity Manager Installation Guide.

To edit a Job server and its functions

  1. In the Manager, select the SAP R/3 > Basic configuration data > Server category.

  2. Select the Job server entry in the result list.

  3. Select the Change main data task.

  4. Edit the Job server's main data.

  5. Select the Assign server functions task and specify server functionality.

  6. Save the changes.
Detailed information about this topic
Related topics

Main data for a Job server

NOTE: All editing options are also available in the Designer under Base Data > Installation > Job server.

NOTE: More properties may be available depending on which modules are installed.

Table 25: Job server properties

Property

Meaning

Server

Job server name.

Full server name

Full server name in accordance with DNS syntax.

Syntax:

<Name of servers>.<Fully qualified domain name>

Target system

Computer account target system.

Language

Language of the server.

Server is cluster

Specifies whether the server maps a cluster.

Server belongs to cluster

Cluster to which the server belongs.

NOTE: The Server is cluster and Server belongs to cluster properties are mutually exclusive.

IP address (IPv6)

Internet protocol version 6 (IPv6) server address.

IP address (IPv4)

Internet protocol version 4 (IPv4) server address.

Copy process (source server)

Permitted copying methods that can be used when this server is the source of a copy action. At present, only copy methods that support the Robocopy and rsync programs are supported.

If no method is given, the One Identity Manager Service determines the operating system of the server during runtime. Replication is then performed with the Robocopy program between servers with a Windows operating system or with the rsync program between servers with a Linux operating system. If the operating systems of the source and destination servers differ, it is important that the right copy method is applied for successful replication. A copy method is chosen that supports both servers.

Copy process (target server)

Permitted copying methods that can be used when this server is the destination of a copy action.

Coding

Character set coding that is used to write files to the server.

Parent Job server

Name of the parent Job server.

Executing server

Name of the executing server. The name of the server that exists physically and where the processes are handled.

This input is evaluated when the One Identity Manager Service is automatically updated. If the server is handling several queues, the process steps are not supplied until all the queues that are being processed on the same server have completed their automatic update.

Queue

Name of the queue to handle the process steps. The process steps are requested by the Job queue using this queue identifier. The queue identifier is entered in the One Identity Manager Service configuration file.

Server operating system

Operating system of the server. This input is required to resolve the path name for replicating software profiles. The values Win32, Windows, Linux, and Unix are permitted. If no value is specified, Win32 is used.

Service account data

One Identity Manager Service user account information. In order to replicate between non-trusted systems (non-trusted domains, Linux server), the One Identity Manager Service user information has to be declared for the servers in the database. This means that the service account, the service account domain, and the service account password have to be entered for the server.

One Identity Manager Service installed

Specifies whether a One Identity Manager Service is installed on this server. This option is enabled by the QBM_PJobQueueLoad procedure the moment the queue is called for the first time.

The option is not automatically removed. If necessary, you can reset this option manually for servers whose queue is no longer enabled.

Stop One Identity Manager Service

Specifies whether the One Identity Manager Service has stopped. If this option is set for the Job server, the One Identity Manager Service does not process any more tasks.

You can make the service start and stop with the appropriate administrative permissions in the Job Queue Info program. For more information, see the One Identity Manager Process Monitoring and Troubleshooting Guide.

Paused due to unavailability of a target system

Specifies whether task processing for this queue has been stopped because the target system that uses this Job server as a synchronization server is temporarily unavailable. As soon as the target system is available again, processing starts and all outstanding tasks are performed.

For more information about offline mode, see the One Identity Manager Target System Synchronization Reference Guide.

No automatic software update

Specifies whether to exclude the server from automatic software updating.

NOTE: Servers must be manually updated if this option is set.

Software update running

Specifies whether a software update is currently running.

Server function

Server functionality in One Identity Manager. One Identity Manager processes are handled with respect to the server function.

Related topics

Specifying server functions

NOTE: All editing options are also available in the Designer under Base Data > Installation > Job server.

The server function defines the functionality of a server in One Identity Manager. One Identity Manager processes are handled with respect to the server function.

NOTE: More server functions may be available depending on which modules are installed.
Table 26: Permitted server functions

Server function

Remark

CSV connector

Server on which the CSV connector for synchronization is installed.

Domain controller

The Active Directory domain controller. Servers that are not labeled as domain controllers are considered to be member servers.

Printer server

Server that acts as a print server.

Generic server

Server for generic synchronization with a custom target system.

Home server

Server for adding home directories for user accounts.

Update server

This server automatically updates the software on all the other servers. The server requires a direct connection to the database server that One Identity Manager database is installed on. It can run SQL tasks.

The server with the One Identity Manager database installed on it is labeled with this functionality during initial installation of the schema.

SQL processing server

It can run SQL tasks. The server requires a direct connection to the database server that One Identity Manager database is installed on.

Several SQL processing servers can be set up to spread the load of SQL processes. The system distributes the generated SQL processes throughout all the Job servers with this server function.

CSV script server

This server can process CSV files using the ScriptComponent process component.

Generic database connector

This server can connect to an ADO.Net database.

One Identity Manager database connector

Server on which the One Identity Manager connector is installed. This server synchronizes the One Identity Manager target system.

One Identity Manager Service installed

Server on which a One Identity Manager Service is installed.

Primary domain controller

Primary domain controller.

Profile server

Server for setting up profile directories for user accounts.

SAM synchronization Server

Server for synchronizing an SMB-based target system.

SAP R/3 connector

Server on which the SAP R/3 connector is installed. This server synchronizes the SAP R/3 target system.

SMTP host

Server from which One Identity Manager Service sends email notifications. Prerequisite for sending mails using One Identity Manager Service is SMTP host configuration.

Default report server

Server on which reports are generated.

Windows PowerShell connector

The server can run Windows PowerShell version 3.0 or later.

Related topics
Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación