サポートと今すぐチャット
サポートとのチャット

One Identity Safeguard for Privileged Passwords 6.0 LTS - Administration Guide

Introduction System requirements Using the virtual appliance and web management console Cloud deployment considerations Setting up Safeguard for Privileged Passwords for the first time Search box Using the web client Installing the desktop client Using the desktop client Privileged access requests Toolbox Accounts Account Groups Assets Asset Groups Discovery Entitlements Partitions Settings
Access Request settings Appliance settings Asset Management settings Backup and Retention settings Certificate settings Cluster settings External Integration settings Messaging settings Profile settings Safeguard Access settings
Users User Groups Disaster recovery and clusters Administrator permissions Preparing systems for management Troubleshooting Frequently asked questions Appendix A: Safeguard ports Appendix B: SPP 2.7 or later migration guidance Appendix C: SPP and SPS join guidance Appendix D: Regular Expressions Appendix E: Historical changes by release Glossary

SSH Key

You can configure Safeguard for Privileged Passwords to authenticate to a managed system using an SSH authentication key. Safeguard for Privileged Passwords will not rotate SSH Keys unless you select the Manage SSH Key option in the asset's profile change schedule. For more information, see Adding change password settings.

Note: This option is not available for all operating systems. But if a Safeguard for Privileged Passwords asset requires an SSH host key and does not have one, Check Password, Change Password, and Test Connection will fail. For more information, see Connectivity failures.

Table 51: SSH Key authentication type properties
Property Description
Automatically Generate the SSH Key

Select this option to have Safeguard for Privileged Passwords generate the SSH authentication key.

Manually Deploy the SSH Key

When you select Automatically Generate the SSH Key, Safeguard for Privileged Passwords allows you to select this option so that you can manually append this public key to the authorized keys file on the managed system for the service account. For more information, see Downloading a public SSH key.

The SSH authentication key becomes available after Safeguard for Privileged Passwords creates the asset.

Important: If you do not select this option, Safeguard for Privileged Passwords automatically installs the SSH authentication key. If you do select this option, Safeguard for Privileged Passwords creates the key and associates it with the Safeguard for Privileged Passwords asset you are creating, but it does not install it on the managed system for you.

Import and Manually Deploy the SSH Key

Select this option, then Browse to import an SSH authentication key. For more information, see Importing an SSH key.

Key Comment

(Optional) Enter a description of this SSH key.

Service Account Name

Enter the service account name that Safeguard for Privileged Passwords is to use for management tasks. This is the account Safeguard for Privileged Passwords uses to install the SSH authentication key on the asset. For more information, see About service accounts.

Service Account Password

If not importing the SSH authentication key, then you must enter the service account password Safeguard for Privileged Passwords needs to authenticate to this managed system.

Limit: 255 characters

Privilege Elevation Command

If required, enter a privilege elevation command (such as sudo). This is used as a prefix for commands that require privileged access on the system and to manage accounts on Unix-based systems; that is, to check and change passwords and to discover accounts.

When adding an asset, Safeguard for Privileged Passwords uses this command to perform Test Connection. For more information, see About Test Connection.

To enable Safeguard for Privileged Passwords to elevate the privileges of the service account, assign the asset to the scope of a partition profile that has the privilege elevation command defined. For more information, see Creating a profile.

The privilege elevation command must run non-interactively, that is, without prompting for a password. For more information, see Preparing Unix-based systems.

Limit: 255 characters

Test Connection

Click this button to verify that Safeguard for Privileged Passwords can log in to this asset using the service account credentials you have provided. For more information, see About Test Connection.

Service Account Profile

Click Edit to add the profile or — Remove to delete the assigned profile. Available profiles are based on the partition selected on the General tab (asset discovery). To update the profile later, go to the service account and update the Profile. For more information, see General tab (account).
Auto Accept SSH Host Key

Select this option to have Safeguard for Privileged Passwords automatically accept the SSH host key when it creates the Safeguard for Privileged Passwords asset.

When this option is selected, Safeguard for Privileged Passwords displays the thumbprint of the SSH host key that was discovered. When a managed system requiring an SSH host key does not have one, Check Password will fail. For more information, see Connectivity failures.

Port

Enter the port number used by SSH to log in to the managed system.

Required

Connection Timeout

Enter the command timeout period. This option applies only to platforms that use telnet or SSH.

Default: 20 seconds

Importing an SSH key

When you add an asset using the SSH Key authentication type, Safeguard for Privileged Passwords gives you the option to Use an Imported SSH Key.

To import an SSH Key

  1. Click Add Asset from the toolbar to add an asset.
  2. In the Connection tab:
    1. In Authentication type, select SSH Key.
    2. In SSH Key Generation and Deployment Settings, select Import and Manually Deploy SSH Key.
    3. Browse to select an SSH key.
  3. In the SSH Key dialog, click Import an SSH Key.
  4. In the Import an SSH Key dialog, specify the following information:
    1. In Private Key File, Browse to select a private key file.
    2. In Key Comment, enter a comment regarding the key.
    3. Click Import.

Directory Account

You can configure Safeguard for Privileged Passwords to authenticate to a managed system using an account from an external identity store such as Microsoft Active Directory. In order to use this authentication type, you must first add a directory asset to Safeguard for Privileged Passwords and add domain user accounts. For more information, see Accounts.

Table 52: Directory Account authentication type properties
Property Description
Service Account Name

Click Select Account. Choose the service account name used for management tasks. The accounts available for selection are domain user accounts that are linked to a directory that was previously added to Safeguard for Privileged Passwords.

Service Account Password

If required, enter the password used to authenticate.

Privilege Elevation Command

If required, enter a privilege elevation command (such as sudo). This is used as a prefix for commands that require privileged access on the system and to manage accounts on Unix-based systems; that is, to check and change passwords and to discover accounts.

When adding an asset, Safeguard for Privileged Passwords uses this command to perform Test Connection. For more information, see About Test Connection.

To enable Safeguard for Privileged Passwords to elevate the privileges of the service account, assign the asset to the scope of a partition profile that has the privilege elevation command defined. For more information, see Creating a profile.

The privilege elevation command must run non-interactively, that is, without prompting for a password. For more information, see Preparing Unix-based systems.

Limit: 255 characters

Test Connection

Click this button to verify that Safeguard for Privileged Passwords can log in to this asset using the service account credentials you have provided. For more information, see About Test Connection.

Service Account Profile

  • Click Edit to add the profile or — Remove to delete the assigned profile. Available profiles are based on the partition selected on the General tab (asset discovery). To update the profile later, go to the service account and update the Profile. For more information, see General tab (account).

    • Use Named Pipe for service account connection

    Select to use the Named Pipe when connecting to the asset. Clear this check box to use TCP/IP when connecting to the asset.

    Use SSL Encryption

    Select this option to enable Safeguard to encrypt communication with this asset. If you do not select this option for a MicrosoftSQL Server that is configured to force encryption, Test Connection will use untrusted encryption and succeed with valid credentials. For more information about how Safeguard database servers use SSL, see How do Safeguard for Privileged Passwords database servers use SSL.

    Verify SSL Certificate

    Use this option to enable or disable SSL Certificate verification on the asset. When enabled, Safeguard for Privileged Passwords compares the signing authority of the certificate presented by the asset to the certificates in the Trusted Certificates store every time Safeguard for Privileged Passwords connects to the asset. Trust must be established for Safeguard for Privileged Passwords to manage the asset. For Safeguard for Privileged Passwords to verify an SSL certificate, you must add the asset's signing authority certificate to the Trusted Certificates store. Only clear the Verify SSL Certificate option if you do not want to establish trust with the asset’s

    Privilege Level Password If required, enter the system enable password to allow access to the Cisco configuration.
    Auto Accept SSH Host Key

    Select this option to have Safeguard for Privileged Passwords automatically accept an SSH host key. When an asset requiring an SSH host key does not have one, Check Password will fail. For more information, see Connectivity failures.

    Instance

    Specify the Instance name if you have configured multiple instances of a SQL Server on this asset. If you have configured a default (unnamed) instance of the SQL Server on the host, you need to provide the IP address and port number.

    Port

    Enter the port number to log in to the asset. This option is not available for all operating systems.

    Connection Timeout

    Enter the directory connection timeout period. Default: 20 seconds.

    Local System Account

    You can configure Safeguard for Privileged Passwords to authenticate to a managed SQL Server using a local system account and password. The local system account is a Windows user account on the server that is hosting the SQL database.

    NOTE: In order to use this authentication type, you must add both a Windows asset and a SQL Server asset to Safeguard for Privileged Passwords.

    Table 53: Local System Account authentication type properties
    Property Description
    Service Account

    Click Select Account to choose the local system account associated with the SQL Server for Safeguard for Privileged Passwords to use for management tasks.

    Test Connection

    Click this button to verify that Safeguard for Privileged Passwords can log in to this asset using the local system account credentials you have provided. For more information, see About Test Connection.

    Use Named Pipe for service account connection

    Select to use the Named Pipe when connecting to the asset. Clear this check box to use TCP/IP when connecting to the asset.

    Advanced

    Open to reveal the following settings:

    As Privilege

    Specify the Oracle privilege level to use when connecting with the selected Oracle service account, if required. The Oracle SYS account requires the privilege level SYSDBA or SYSOPER. For details, see the Oracle document, About Administrative Accounts and Privileges and SYSDBA and SYSOPER System Privileges.

    Instance (Service Name)

    Specify the Instance name if you have configured multiple instances of a SQL Server on this asset. If you have configured a default (unnamed) instance of the SQL Server on the host, you need to provide the IP address and port number.

    Specify the Service Name if you are configuring an Oracle asset.

    Port

    Enter the port number to log in to the asset.

    Connection Timeout

    Enter the SQL server connection timeout period.

    Default: 20 seconds

    関連ドキュメント

    The document was helpful.

    評価を選択

    I easily found the information I needed.

    評価を選択