サポートと今すぐチャット
サポートとのチャット

One Identity Safeguard for Privileged Passwords 6.0 LTS - Administration Guide

Introduction System requirements Using the virtual appliance and web management console Cloud deployment considerations Setting up Safeguard for Privileged Passwords for the first time Search box Using the web client Installing the desktop client Using the desktop client Privileged access requests Toolbox Accounts Account Groups Assets Asset Groups Discovery Entitlements Partitions Settings
Access Request settings Appliance settings Asset Management settings Backup and Retention settings Certificate settings Cluster settings External Integration settings Messaging settings Profile settings Safeguard Access settings
Users User Groups Disaster recovery and clusters Administrator permissions Preparing systems for management Troubleshooting Frequently asked questions Appendix A: Safeguard ports Appendix B: SPP 2.7 or later migration guidance Appendix C: SPP and SPS join guidance Appendix D: Regular Expressions Appendix E: Historical changes by release Glossary

Verifying syslog server configuration

Use the Send Test Event link located below the Syslog configuration table on the Syslog pane to verify your syslog server configuration. Navigate to Administrative Tools | Settings | External Integration | Syslog.

To validate your setup

  1. When configuring your syslog server, on the Syslog dialog add the test event.
  2. Back on the Syslog pane, select the syslog server configuration from the table, then select Send Test Event.

    Safeguard for Privileged Passwords logs a test message to the designated syslog server.

Note: To log event messages to a syslog server, you must configure Safeguard for Privileged Passwords to send alerts. For more information, see Configuring alerts.

Why did the password change during an open request

There are three ways a password can change while a user has it checked out.

  1. An Asset Administrator manually changes the password. For more information, see Checking, changing, or setting an account password.
  2. A profile was scheduled to automatically change the password. For more information, see Change Password.
  3. A policy allows both simultaneous access and requires that the password change when a user checks it in.

If the password changes while a user has it checked out, and the current request is still valid, the user can select either Copy or Show Password again to obtain the new password.

Appendix A: Safeguard ports

Safeguard for Privileged Passwords requires port availability for various system operations.

Port details

Safeguard network port details are in the following table.

Table 213: Safeguard ports

Use in SPP

Appliance port

Protocol

Description

 

 MGMT

TCP

HTTPS used for a secure first-time configuration of the appliance. The IP address is a fixed address that cannot be changed. It is available in case the primary interface becomes unavailable.

Typically used: TCP/443 and IP address: 192.168.1.105

Base operation

25

TCP

SMTP: Simple Mail Transfer

Base operation

53

TCP / UDP

DNS (Domain Name Server)

Base operation

123

 

NTP time synchronization

Base operation

88

UDP

For communication with Active Directory, Safeguard uses port 88 (for example, Kerbos authorization against Active Directory).

Base operation (AD Asset and Account Discovery, password check and change)

389

TCP

LDAP used for Active Directory Asset Discovery and Directory Accounts Discovery. The standard global catalog port, 3268 (LDAP), must be open on the firewall for every Windows global catalog server in the environment and SPP Appliance to communicate for directory management tasks (for example, adding a directory account, a directory user account, or a directory user group). LDAP uses port 389 for unencrypted connections. For more information, see the Microsoft publication How the Global Catalog Works.

For basic functionality when changing an OS account password, the following ports are required:

  • Windows Active Directory: TCP/389 and TCP/445
  • Windows, Windows Desktop: TCP/445

Also see:

Base operation (password check and change)

445

TCP SMB

NetLogon Service (NP-In) is used to perform password check and changes for Windows Active Directory and Windows, Windows Desktop. Also see port 389 and Preparing Windows systems

LDAPS 636   Supported for non-AD LDAP providers. The default LDAPS port is 636. Port 636 needs to be open to use LDAPS for non-AD LDAP providers.

WMI

135

(49152-

65535

Windows)

TCP

The firewall must be configured to allow Windows Management Instrumentation (WMI) for computer name and other lookups. WMI is also required if SPP performs any of the functions listed below on any Windows machine (whether it be a dependent system or a normal target platform):

  • Managing service account passwords
  • Managing scheduled task passwords
  • Restarting a service
  • Using Account Discovery on the target

WMI / DCOM from DPA will need access to TCP/135 to initiate communication on the target. The conversation continues on a random negotiated port. On Windows 7 and Windows 2008 (and above) this is in the range: 49152 - 65535.

To limit the ports used by WMI/DCOM, refer to these Microsoft articles:

For Windows Active Directory, if using Account Discovery or Auto Discovery CLDAP ping UDP/389 is also required. See:

WMI

49152-65535

 

See port 135

SPP/SPS internal communications

8649

TCP

Used for the SPP/SPS internal communications when SPS is joined with SPP.

  • SPS to SPP:
    • SPS completes the join by talking to SPP on port 8649.
    • SPS authenticates a new session and acquires the password from SPP by talking on port 8649.
    • SPS queries SPP for cluster information and the appliance version.
  • SPP to SPS:
    • SPP queries SPS for cluster information and node roles.
    • SPP pushes SSH host keys to SPS when a session is initiated.
    • SPP queries SPS for session playback, follow mode, and session termination.

In SPS, the nodes require UDP ports 500 and 4500 and TCP 8649. For the latest detail, see the SPS Administration Guide, Enabling cluster management.

Firewall

655

TCP / UDP (X0)

TINC (655) is open for secure VPN communication between appliances in a clustered high-availability configuration. TINC perfers UDP and uses TCP if UDP is unreliable. See KB article 232671.

To enroll an appliance into a cluster, the appliance must communicate over port 655 UDP/TCP and port 443 TCP, and must have IPv4 or IPv6 network addresses (not mixed). See:

Firewall and Client and Web browser points

443

TCP

(X0)

HTTPS over TLS/SSL (443/TCP) permits inbound requests (for client/Web/API access). Used to initially log on to the appliance to join the cluster member. Users must have access to the cluster X0 ports on port 443.

To enroll an appliance into a cluster, the appliance must communicate over port 655 UDP/TCP and port 443 TCP, and must have IPv4 or IPv6 network addresses (not mixed). See:

The port is used to prepare VMware ESXi host. See:

Global catalog

3268

 

The LDAP standard global catalog port for Active Directory. The standard global catalog port, 3268 (LDAP), must be open on the firewall for every Windows global catalog server in the environment and SPP Appliance to communicate for directory management tasks (for example, adding a directory account, a directory user account, or a directory user group). LDAP uses port 389 for unencrypted connections. For more information, see the Microsoft publication How the Global Catalog Works. Also see:

There are no services listening for this port on a member/server workstation (local configuration).

Kiosk

DB9

SERIAL

To connect to the Safeguard Kiosk. See KB article 233584.

Radius server

1812

 

Default port number that a Radius server uses to listen for authentication requests. See Adding identity and authentication providers.

SonicWALL SMA or CMS appliance

8443

TCP/ UDP

For SonicWALL SMA or CMS appliance. See information related to authenticating an asset, Password (local service account).

SQL server

1433

 

The port on which the SQL server will be listening for connections. See information related to authenticating an asset, Password (local service account).

Telnet

23

TCP

Telnet

Platform ports

ACF2 – 23

ACF2 LDAP – 389

AIX – 22

AWS – 443

Cent OS – 22

Cisco Pix – 22

Debian – 22

IDRAC – 22

ESXi - 443 default

F5 - 22 default

Fortinet – 22 default

Free BSD – 22

HP iLO

IBM i – 23

JunOS – 22

MongoDB - https://docs.mongodb.com/manual/reference/default-mongodb-port/

MySQL – 3306

Oracle – 1521

Oracle Linux – 1521

OSX – 22

Other – port is not supported for the platform

Other Managed - port is not supported for the platform

Other Linux – 22

Pan OS – 22

PostgreSQL – 5432 default

RACF – 23

RACF LDAP – 389

RHEL – 22

SAP Hana – 39013 default

SAP Netweaver – 3300

Solaris – 22

SoniOS – 22

SonicWall SMA – 22

SQL – 1433

SUSE – 22

SyBase – 5002

Top Secret – 23

Top Secret LDAP – 389

Ubuntu – 22

Windows (various depanding on OS type) – 135/389/445 and maybe dynamic ports

Archiving

Archiving uses uses SFTP/SCP and CIFS.

  • SFTP/SCP: 22 TCP (X0). See the Port details table, appliance port Safeguard ports for X0.
  • CIFS: Uses UDP ports 137 and 138 and TCP ports 139 and 445.
Backup

Same as Archiving.

External Authentication

Federation – Port 443

Secondary Auth – Radius Port 1812

Starling - Port 443

External Integration

SNMP – Port 162 UDP

SMTP - Port 25 TCP Simple Mail Transfer

SysLog – 514 UDP

External Integration for Password Workflow

Approval Anywhere - 443

Ticketing – ServiceNow 443

Ticketing - Remedy 1433 (communicates to the SQL server directly)

Other

NTP – port 123 UDP

Directories – Ports 389 LDAP and 3268 global catalog

Appendix B: SPP 2.7 or later migration guidance

Safeguard for Privileged Passwords version 2.7 was simplified to allow for a separation of duties based only on identity management, asset management, access policy configuration, and appliance maintenance. In the migration to version 2.7 or later, greater flexibility is realized through these high-level assignments:

  • Directories are migrated to assets.
  • Accounts include both directory accounts and asset accounts.
  • Each directory is assigned its own partition in the migration to version 2.7 or later.

The following information details the changes from version 2.6 to version 2.7 or later. The same information is generally true if you are upgrading from version 2.1 forward to version 2.7 or later.

Before you migrate
  • Make sure you back up before migrating to version 2.7 or later.
  • Be sure you have data you want to migrate and perform general clean up. For example, if you have entities that are not needed, remove them before migrating.

  • Complete as many outstanding Access Requests as possible. This is especially important for Active Directory Access Requests because any outstanding Active Directory Access Requests will need to be recreated after the migration since they cannot be resubmitted.

  • Save all necessary version 2.6 logs. Directory log history prior to the migration to version 2.7 or later is not available after the migration. Details follow.
    • Before the migration to version 2.7 or later, Directory Administrators, Asset Administrators, and Auditors can see audit log history for each of the directories, regardless of who created or changed them.
    • The migration takes Directories and turns them into directory assets. All associated relationships with directories are also migrated to the new directory assets. The Directory Administrator role is removed and users with Directory Administrator permission are assigned as a partition owners for directories that are migrated to assets.
    • After the migration to version 2.7 or later, the Asset Administrator can see the directory asset whose audit log history starts on the day of the migration. Events prior to migration are not available.
  • We recommend two clients:
    • A version 2.6 client to connect to older appliances
    • A new version 2.7 or later client to get the new features of Directory Assets and Discovery

      This recommendation is made because a new client uses v3 endpoints. A version 2.6 appliance doesn't know how to respond to v3 calls. An new client pointed to an old appliance will get an error when trying to connect. You will see this message: The Safeguard desktop application is not compatible with this appliance. Please contact your administrator.

What to expect

The following lists entity changes you will note in the migration to version 2.7. or later.

Directories are migrated to Assets
  • Directories are migrated to assets with the appropriate platform assignment.

  • Directories are still synced with Safeguard.
  • Migrated directory assets reflect any account dependencies with Windows services and task on other assets.
  • You can select whether a directory asset manages the forest or a subset of the forest. Multiple assets can be assigned against the same forest.

  • Every migrated directory has Managed Forest selected so the administrator can create a directory to manage a domain or part of a domain. As assets, directories can be shared and all domains in a forest can be managed from one instance of a domain. Navigate to Administrative Tools | Asset | Management tab | Managed Forest check box.

  • Every migrated directory asset has Available for discovery across all partitions selected so the asset is available for asset and account aiscovery jobs beyond partition boundaries. Any partition that exists is able to use this directory asset. Navigation: Administrative Tools | Asset | Management tab | Available for discovery across all partitions check box.

  • Discovery detail grids will identify migrated directory assets with a Partition value of Import.
  • Each migrated directory asset is assigned to its own partition and includes the Account Discovery jobs, the check and change schedules, account password rules, password sync groups, and related functions.

    • To view the Account Discovery job assigned as the results of migration, navigate to Administrative Tools | Asset. Select the directory asset then Edit. Then navigate to | Account Discovery tab to see the selected Account Discovery job for the partition. If no schdule is selected, this message displays: No Account Discovery Chosen.
  • Directory tags are migrated into the appropriate partition tag. To copy a tag to a new partition, change the description then copy the tag.
Administrative Tools | Directories removed and Discovery added

When Safeguard for Privileged Sessions version 2.7 is installed, directories, discovery jobs, and other related entities automatically migrate to the appropriate associations. The Administrative Tools | Directories selection is gone, and Administrative Tools | Discovery has been added. Functionality is reorganized and streamlined for better data control.

Discovery
  • During migration, existing partition account discovery jobs are separated by platform type, for example, Unix, Windows, or Directory. As a result, you will see discovery jobs with the same name and a different prefix which denotes the platform. For example, you may see:
    • (Unix) AD-Asset Discovery account discovery job
    • (Windows) AD-Asset Discovery account discovery job

    Each discovery job is assigned the appropriate asset and settings that apply to the platform.

    You can rename or delete jobs, as needed. Navigate to: Administrative Tools | Discovery.

  • In version 2.6, you can have several directory account discovery jobs assigned to the same directory. During migration, all the directory account discovery jobs assigned to a directory are put in a single account discovery job with multiple rules, one for each prior job. The job schedule follows the directory sync interval.
  • In version 2.7, you can assign a profile to the account or a sync group using the account template in the Account Discovery job rule. For more information, see Adding an Account Discovery rule.

Account changes
  • Accounts include directory accounts and asset accounts.
  • Directory accounts are migrated into accounts and are assigned to the appropriate asset.
  • Accounts identify the dependent assets.
  • Every migrated account has Available for use across all partitions selected. For example, if you create an asset service account with this check box selected, the service account could be used from anywhere.

    Navigate to Administrative Tools | Account | Management tab | Available for use across all partitions check box.

  • You cannot add the same account to multiple partitions from the same domain.
  • You can select a directory account and view the assets that have dependency on the directory account.

    Navigate to Administrative Tools | Accounts | Dependent Assets.

Dynamic account group changes

The rules for dynamic asset groups and dynamic account groups include attributes for directory assets.

NOTE: Dynamic asset groups rule attributes do not include attributes for directory accounts. A directory cannot be the target of an asset group because you can not get an RDP or SSH session to them. Dynamic asset groups are for Policy Administrator control and directories are not included in policies.

Identity and authentication provider migration

A directory identity provider is managed by creating a directory asset which points to the same directory. The directory identity provider can be created and, optionally, put under management or not.

During migration from earlier versions of Safeguard for Privileged Passwords, if there are Active Directory users and user groups, SPP determines if Active Directory should be the identity provider or not. To see the result of the migration:

  1. Navigate to Administrative Tools | Settings.
  2. Select the directory then the General tab.
  3. Scroll down to Available Domains for Identity and Authentication to view the domains selected for the directory. Directory groups require the forest root domain to be visible and available for identity and authentication set on Administrative Tools | Settings | External Integration | Identity and Authentication. For more information, see Available Domains for Identity and Authentication (for Active Directory).

After the initial migration to version 2.6, add the identity provider.

Entitlements and access request policies
  • Entitlement access request policies are migrated. If the access configuration for the asset-based session asset is a directory and you are using the version 2.6 desktop client, the name of the directory account may be blank since version 2.6 understood only one assignment and version 2.7 or later handles multiple assignments. To verify this, navigate to the Entitlements | Access Request Policy | Access Config tab. For directory accounts, the Asset-Based Session Access is correctly identified as a Directory Account, however, the directory account name is blank.
Management

Directories can be subdivided so administrators can be assigned to manage portions of a directory. For example, Admin A may only manage objects in the Finance organizational unit (OU) of the directory, and Admin B may only manage objects in the Engineering OU of the directory. This is possible via the settings on Assets including the asset Name, Domain Name, and whether to Manage Forest. This way, multiple assets can govern the same domain.

Directory accounts can be service accounts to other assets to run windows services/tasks on assets to keep password changes in sync.

Administrator role changes
  • The Directory Administrator role is removed, and users with Directory Administrator permission are assigned as partition owners for directories that are migrated to assets. This role does not include the ability to manage identity providers.
  • An Authorizer Administrator can now add an Active Directory forest only for identity to use as an unprivileged service account for connection.
  • An Asset Administrator can now:
    • Use service accounts to manage Active Directory. The service accounts can have limited permissions within a single domain.
    • Use multiple service accounts for managing the same Active Directory domain with different limited permissions within the domain. For example, the administrator can add the domain as a managed asset multiple times with different service accounts.
    • Use a service account from Active Directory to manage an asset from a different partition so that the administrator does not have to add that Active Directory to each of the administrator’s partitions.
    • Set up a dependent system for a service running as an Active Directory account that isn’t in the administrator’s partition. This avoids having to add the Active Directory asset or the account to the partition.
    • Add Active Directory for authentication to Safeguard for Privileged Passwords without managing any of the accounts in Active Directory.
    • Set up multiple assets for the same domain.
関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択