Installing an SSL/TLS certificate
To install an SSL certificate
- Go to the following selection:
web client: Navigate to 
Certificates > SSL/TLS Certificates.
- Click
Add Certificate and select Upload Certificate.
- Browse and select the certificate file then click Open.
-
On the dialog box, enter the case sensitive passphrase to import the certificate. If the certificate does not have a private key passphrase, leave the field empty and click OK.
-
After the certificate has been uploaded, assign the certificate to one or more appliances. For more information, see Assigning an SSL/TLS certificate to appliances.
You may also upload the certificate's root CA to the list of trusted certificates. For more information, see Trusted CA Certificates.
|
|
Caution: Improper access to the private SSL key could compromise traffic to and from the appliance. For the most secure configuration, create a Certificate Signature Request (CSR) and have it signed by your normal signing authority.
Then use the signed request as your Safeguard for Privileged Passwords SSL Webserver Certificate. This way, no administrator will have access to the private SSL key that is used by Safeguard for Privileged Passwords and the traffic will be secure. |
Assigning an SSL/TLS certificate to appliances
Safeguard for Privileged Passwords supports an SSL certificate store that is owned by the cluster. This allows you to assign any SSL certificate that you have previously uploaded or enrolled via CSR to any appliance in your clustered environment.
To assign a certificate to appliances
- Go to the following selection:
- web client: Navigate to Certificates > SSL/TLS Certificates.
- Select a certificate from the grid and click the
Assign Certificate to Appliance(s) toolbar button.
- In the Appliances dialog, select one or more appliances and click OK to save your selection.
Follow the same steps to 
Unassign Certificate later.
Syslog Client Certificate
An Appliance Administrator can upload a syslog client certificate so that Safeguard for Privileged Passwords can send authenticated messages to syslog servers that do not accept anonymous clients. For more information, see Syslog.
You can have only one syslog client certificate defined, which is used by all Safeguard for Privileged Passwords Appliances in the same cluster.
Instead of using the default syslog client certificate supplied, it is recommended you generate the Certificate Signing Request (CSR) using Create Certificate Signing Request (CSR). For more information, see Creating a syslog client Certificate Signing Request.
If you do use the default syslog client certificate, you are responsible for configuring the syslog server to accept the default certificate. For more information, see Installing a syslog client certificate.
Manage a Certificate Signing Request (CSR)
To define, generate, or manage a syslog client certificate, go to Syslog Client Certificate:
- web client: Navigate to Certificates > Syslog Client Certificate.
The following properties and controls are available to manage your syslog client certificate.
Table 34: Syslog Client Certificate: Properties
 Refresh |
Click to get the latest information about the client certificate used. |
| Subject |
Displays the client which is the name of the subject assigned to the certificate when it was requested. |
|
Thumbprint |
A unique hash value that identifies the certificate. |
|
Expiration Date |
The expiration date of the certificate. |
| Add Certificate |
Click Add Certificate and select one of the following options to replace the default certificate with a new certificate:
|
| Use Default |
Click Use Default to reset the certificate back to the default supplied by Safeguard for Privileged Passwords.
By default, the data is encrypted in transit but there is no authentication of the client/server. |
Creating a syslog client Certificate Signing Request
A certificate signing request (CSR) is submitted to a Certificate Authority (CA) to obtain a digitally signed certificate. When creating a CSR, you uniquely identify the user or entity that will use the requested certificate. Safeguard for Privileged Passwords allows you to upload or enroll a syslog client certificate using CSRs. Once uploaded or enrolled, the syslog client certificate is added to the syslog client certificate store allowing you to assign it to one or more Safeguard for Privileged Passwords Appliances.
To create a CSR for syslog
- Go to the following selection, based on your client:
- web client: Navigate to Certificates > Syslog Client Certificate.
- Click Add Certificate and select Create Certificate Signing Request (CSR).
- In the Certificate Signing Request dialog, enter the following information:
-
Subject (Distinguished Name): Enter the distinguished name of the person or entity to whom the certificate is being issued in the proper format like: cn=common name,ou=organizational unit,o=organization. Using the format example, cn=sam doe,ou=marketing,o=mycompany. Maximum length is 500 characters.
- Click Use Distinguished Name Creator to create the distinguished name based on your entries in Fully Qualified Domain Name (required), Department, Organization, City/Locality, State/County/Region, and Country.
-
Key Size: Select the bit length of the private key pair. The bit length determines the security level of the SSL certificate. A larger key size is more secure but encryption is slower.
-
Click OK to save your selections and enroll the certificate.
