Chat now with support
Chat with Support

Identity Manager 9.0 LTS - Web Designer Web Portal User Guide

General tips and getting started Security keys (WebAuthn) Requests
Setting up and configuring request functions Requesting products Saved for Later list Pending requests Displaying request history Resubmitting requests Canceling requests Renewing products with limit validity periods Unsubscribing products Displaying approvals Undoing approvals Request inquiries Auditing requests Escalated requests
Attestation
Managing attestations Attestors for attestation cases Sending attestation reminders My attestation cases Pending attestations Displaying attestation history Attestation inquiries Auditing attestations Escalation
Compliance Responsibilities
My responsibilities
Specifying keywords for requestable products Managing my departments Managing my application roles Managing my devices Managing my business roles Managing my identities Managing my cost centers Managing my multi-request resources Managing my multi requestable/unsubscribable resources Managing my resources Managing my software applications Managing my locations Managing my system entitlements Managing my system roles Managing my assignment resources
Delegating tasks Ownerships Auditing
Auditing departments Auditing application roles Auditing devices Auditing business roles Auditing identities Auditing cost centers Auditing multi-request resources Auditing multi requestable/unsubscribable resources Auditing resources Auditing software Auditing locations Auditing system roles Auditing system entitlements Auditing assignment resources
Governance administration
Managing departments Managing business roles Managing identities Managing cost centers Managing multi-request resources Managing multi requestable/unsubscribable resources Managing resources Managing locations System entitlements Managing system roles Managing assignment resources
Applications Calls Discovering your statistics on the home page Appendix: Attestation conditions and approval policies from attestation procedures Appendix: Page and menu descriptions
Information (Menu description) My requests (Menu description) Profile (Menu description) Help (Menu description) Request (Menu description) Attestation (Menu description)
My attestation status (page description) My actions (page description)
Pending attestations (page description)
Pending attestations – Attestation policies (page description) Pending attestations: One Identity Manager application roles (page description) Pending attestations: Departments (page description) Pending attestations: System roles (page description) Pending attestations: Locations (page description) Pending attestations: Business roles (page description) Pending attestations: PAM assets (page description) Pending attestations: PAM user accounts (page description) Pending attestations: Employees (page description) Pending attestations: Cost centers (page description) Pending attestations: User accounts (page description) Pending attestations: System entitlements (page description) Pending attestations: Resources (page description) Pending attestations: Assignment resources (page description) Pending attestation: Multi-request resources (page description) Pending attestations: Software (page description) Pending attestations: Multi requestable/unsubscribable resources (page description) Pending attestations: Devices (page description) Pending attestations – approvals (page description)
Attestation history (page description) Attestation inquiries (page description)
Auditing (page description) Governance administration (page description) Attestation escalation approval (page description)
Compliance (Menu description) Responsibilities (Menu description)
My responsibilities (page description)
Identities (page description) System entitlements (page description) Business roles (page description) System roles (page description) Departments (page description) Cost centers (page description) Locations (page description) Application roles (page description) Resources (page description) Assignment resources (page description) Multi-request resources (page description) Software (page description) Multi requestable/unsubscribable resources (page description) Devices (page description)
Delegating tasks (page description) Ownerships (page description) Auditing (page description)
Auditing – Departments (page description) Auditing – Application roles (page description) Auditing – Device (page description) Auditing – Business roles (page description) Auditing – Identity details (page description) Auditing – Cost center (page description) Auditing – Multi-request resources (page description) Auditing – Multi requestable/unsubscribable resources (page description) Auditing - Resources (page description) Auditing – Software (page description) Auditing – Locations (page description) Auditing – System roles (page description) Auditing - Assignment resource (page description) Auditing – Active Directory (page description) Auditing – Azure Active Directory (page description) Auditing – Custom target system group (page description) Auditing – Google Workspace (page description) Auditing – Domino (page description) Auditing – LDAP (page description) Auditing – Oracle E-Business Suite (page description) Auditing – Privileged Account Management (page description) Auditing – SAP R/3 (page description) Auditing – Unix (page description)
Governance administration (page description)
Business roles (page description) Identities (page description) Multi-request resources (page description) Multi requestable/unsubscribable resources (page description) Organization (page description) Resources (page description) System entitlements (page description) System roles (page description) Assignment resources (page description)
Calls (Menu description)

Auditing– Location (page description)

To open the Attestation – Location page go to Responsibilities > Auditing > Locations > Show details > Attestation.

On the Attestation - Location page, you can:

The following tables give you an overview of the various features and content on the Attestation - Location page.

Table 639: Controls

Control

Description

View approvers for pending cases

Use this button to display all identities that still have to make approval decisions about attestation cases and Then you can send reminder emails to these identities (see Displaying attestors of location pending attestation cases).

Table 640: Controls in the attestation case's details pane

Control

Description

Show details

Use this button to display all the objects involved in the attestation case (see Displaying location attestation cases).

Table 641: Columns

Column

Description

Display name

Shows the name of the object included in the attestation case.

Attestation policy

Shows the name of the attestation policy in use.

State

Shows the current status of the attestation case.

The following status' are possible:

  • Pending: The attestation case is not closed yet and must still be approved.

  • Approved: The attestation case was approved. In the details pane, on the Workflow tab, you can see why the attestation case was granted approval.

  • Denied: The attestation case was denied. In the details pane, on the Workflow tab, you can see why the attestation case was denied approval.

New

Shows whether the attestation case is new. New cases have not been granted approval yet but might have been denied approval before.

Due date

Shows by when the attestation case must be completed.

Risk index

Show the attestation case's risk index.

TIP: You can show less data by using the column filters. For more information, see Filtering.

Compliance – Location (page description)

Open the Compliance – Location page by navigating through Responsibilities > Auditing > Locations > Show details > Compliance.

On the Compliance – Location page, you can see compliance rule violations connected with this location (see Displaying location rule violations).

The following table gives an overview of the content of the Compliance – System role page.

Table 642: Columns

Column

Description

Entitlement

Shows the entitlement that caused the rule violation.

Rule

Shows the rule that was violated.

Risk index

Shows the severity of the rule violation (meaning the calculated risk index). The higher this value is, the higher the risk that this rule violation poses.

Risk index

Shows the risk index taking mitigating controls into account. A rule’s risk index can be reduced by a significance amount after mitigating controls have been applied.

Mitigating controls are processes that exist outside the One Identity Manager solution and that reduce the risk of violation. For more information, see Compliance – Governance Administration.

TIP: On the following tabs, you can show other useful information about each rule violation in the pane. To do this, click the corresponding entry in the list.

  • Entitlement: Shows general information about the entitlement.

  • Rule: Show general information about rule that was violated.

TIP: You can show less data by using the column filters. For more information, see Filtering.

Risk – Location (page description)

To open the Compliance – Location page go to Responsibilities > Auditing > Locations > Show details > Compliance.

On the Risk – Location page, you can:

The risk index is calculated from the sum of all attribute-based values and the maximum of all assignment-based values.

The following tables give you an overview of the different functions and content on the Risk – Location page.

Table 643: Controls

Control

Description

View risk functions

Use this button to show the attributes and assignments that contribute to the calculated risk index (see Displaying location risk indexes).

Table 644: Columns

Column

Description

Risk index

Shows which property/assignment affects the risk index.

Risk

  • At root level: Shows the summarized risk index of the property/assignment.

  • At other levels: Shows other details about the properties/assignments.

Weighting/change value

Shows, depending on the type of calculation, the value used to weigh the determined risk index in the overall calculation or the value used to alter the risk index respectively.

History – Location (page description)

To open the History – Location page go to Responsibilities > Auditing > Locations > Show details > History.

On the History – Location page, you can see all the changes made to the location (see Location history).

NOTE: Which changes are shown depends on your system's configuration.

The information is divided out on to three tabs:

  • Events: Shows all the events, which affect a location, either on a timeline or in a table.

    TIP: To navigate along the timeline, click in the pane and move the mouse left or right whilst holding down the left button.

    To zoom in or out, turn the mouse wheel.

  • Status overview: Shows an overview of all assignments. It also shows how long each change was valid for. Use the status overview to track when changes were made and by whom. This way, you not only see the initial and current status but you also see all the steps in between.

  • Status comparison: You can select a date and display all the changes made from then until now. You can also show what the value of the property was at the selected point in time and what the value is now.

The following tables give you an overview of the different functions and content on the History – Location page.

Table 645: Controls

Control

Description

Events

Filter by

Use this function to filter the changes by a specific criteria. For example, you can just display changes from a certain user (see Displaying location history).

TIP: To remove the filter again, click Reset filter next to the corresponding filter.

Switch to table view

Use this button to display the changes in table form (see Displaying location history).

Switch to timeline view

Use this button to display the changes as a timeline.(see Displaying location history).

Status comparison

Time and date picker

Select from which point on you want to see the changes (see Comparing statuses of locations).

Display changed values only

Deselect the check box if you also want to display properties that have not changed since they were created (see Comparing statuses of locations).

Table 646: Controls in the details pane of a change

Control

Description

Compare

Opens the Status comparison tab.

Use this button to show all the changes that were made from the selected point in time until now. You can also show what the value of the property was at the selected point in time and what the value is now.

Table 647: Columns

Column

Description

Events (table view)

Change type

Shows the type of change.

Property

Shows the name of the property that was changed.

Display

Shows the value that was changed. For example, the name of a department.

Date

Shows the date the change was made.

User

Shows the user that made the change.

Status overview

Display

Shows the type of change.

Property

Shows the name of the property that was changed.

Value

Shows the value that was changed. For example, the name of a department.

Run started

Shows when the change was made.

End

Shows for how long the changed value applied or whether it is currently in use.

Status comparison

Modified

Show whether the change took place or not.

Change type

Shows the type of change.

Object type

Show the type of object involved in the change.

Property

Show the name of the object that was changed.

Historical value

Shows the value before the change was made.

Current value

Shows the value that is currently in use.

TIP: You can show less data by using the column filters. For more information, see Filtering.

Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating